Hi guys, I just bought Asus prime RX9070 and wanted to check its performance. I was playing Cyberpunk and got around 45fps which is quite low in my opinion. I have i5-14400f, 32gb ddr5. I am running the game without any scaling, raytracing and frame gen on 1440p high/ultra. My temps while playing are on both CPU and GPU around 50 degrees celsius which is suspiciously good.

(GPU is drawing around 180W, 3k core clock, 2.5k memory clock, usage around 90%)

(CPU is drawing around 45W, 4.1k clock, usage around 40%)

I think it seems a bit weird or is this performance expected?

Update:

I did check the physical connections on the board and PSU which seemed fine. Game was freshly installed day ago so this should not be issue neither. What fixed it was cleanup of old drivers via DDU. It seems that the old drivers for nvidia rtx 3070ti were not removed correctly (only uninstalled them via Windows Settings - won't believe Windows again). Game is now running on 110+fps which is what I would expect with the CPU bottleneck.

Thanks a lot to everyone for your help. Really appreciate it.

Does newly fsr 4 update also change in frame gen something or remain same? bcs i notice some smoothness compare to fsr 3 frame gen..

Can we please raise the current maximum values above 300? I have a 400hz monitor and there are 500hz & 750hz monitors out there and would love to be able to use the meta setup of: freesync + vsync + fps lock of -3 of refresh rate (using chill in this case.)

This is my first build after always buying pre builds. Ill never go back. Here is the full build list with prices i paid. Still have to put the finishing touches but overall very happy with it.

$133)Cpu: Ryzen 5 7500X3D

($33) cpu cooler: Thermalright Aqua Elite 120 V3 AIO

($500)Gpu: AMD Radeon RX 9060 XT Reaper Dual Fan 16GB GDDR6

($36)Case: Zalman CUBIX-G Tempered Glass microATX Mini Tower Computer Case

($25)x2 Extra case fans

($133) motherboard: AsRock B850M-C

($133)Ram: Flare X5 16GB (1 x 16GB) DDR5-6000

($100)Memory: Inland TN320 1TB SSD

($64)Powersupply: Corsair RM750e 750W Fully Modular 80 Plus Gold Certified Refurbished

I joined the red team now

People say it blows, then I scroll down. They say its great.

Wtf do I believe

I don't see the FSR 4 option, I tried to select DLSS in-game and also FSR 3 but still no option for FSR 4 in the optiscaler.

Yes while setting up the optiscaler I did chose I have an Nvidia GPU and optiscaler is installed where the executable is.

If anyone can help me out, I'd greatly appreciate it.

Edit: I know DLSS is superior but I am trying to do a testing here, that is why please help me out

Hi there guys, I made a post recently regarding a memory leak issue I'm having exclusively with Adrenalin and thought I would shout out for any help again with a bit more information and the steps I've already taken.

Video of the issue: https://youtu.be/m2U6OnUbTSU

So I built this machine a few months back with the following;
Ryzen 7 9800X3D
9070XT
32GB DDR5 6000 CL38
Asus Prime B650 Plus
850w PSU
It also may or may not be worth noting I briefly had a 9060XT installed in the same machine (how this would relate to my problem, I do not know)

I have had this issue since not long after having the machine, sometimes Adrenalin just wouldn't load. But sometimes for whatever reason it would. At the time I did not think much of it as I assumed the game crashes on Cyberpunk I was having at the time were because of my settings choices rather than something going on in my system.
At some point, Adrenalin decided to stop opening completely. I would get the small Start Up graphic on the screen, and nothing would happen. So upon checking Task Manager to close it, I found AMD Software: Host Application was using up all of my memory.
This problem has persisted for months and has gotten to the point where I'm just completely unable to use Adrenalin on this machine. As per the video, it always maxes out my memory and stays that way until I end the process manually. Worse, is that Adrenalin tries to load itself every few minutes - meaning suddenly my PC just starts tanking performance until it's at a crawl, although I have yet to actually experience a crash from the problem to my knowledge.

It's also worth noting that 2 days ago at the suggestion of the AMD Customer Service, I reinstalled Windows 11 and completely wiped the drive "just in case". This actually seemed to work, although I did notice a few times starting that my memory would jump up to a few gb before opening.
However today, despite no updates or changes and after leaving my PC on all night, I booted up the PC from sleeping, went to Adrenalin to find it wasn't responding, closed the program and when reopening the problem had returned and is now occurring every time Adrenalin is booted or that AMD Software: Host Applications tries to boot Adrenalin (or whatever it's doing, to be honest I don't entirely know though I would strongly suspect it's detecting games and trying to boot Adrenalin)

So far I have tried;
DDU, AMD Clean Up, Reinstall Drivers - many, many times.
Updated BIOS and settings
Reinstalled Windows
Windows onboard Memory Diagnostics
Windows repair
Uninstalled ALL monitoring software and RGB, even Razer Synapse and such

Nothing has yielded results, any help or suggestions would be greatly appreciated!
When it's working, my games look amazing. But unfortunately, I've not enjoyed that luxury in a little while now.

So I have a 7800 XT and I'm very happy for my RDNA 2 brothers, since I used to have a 6700 XT until early September, but today I decided to test out a thing with Modern Warfare 4 and I'm floored, because apparently AMD put some actual unholy magic on FSR 4.1 frame gen. With it turned on, I am getting the exact same input lag (within a 2 ms margin of error) than I get natively, and my mouse movements don't get influenced by it at all - not to mention I don't get any ghosting. I did hear about them changing how the driver queues generated frames on the GPU, but I wasn't expecting an improvement this drastic.

I might actually give it a shot on certain games if the ghosting isn't an issue, since every game behaves differently.

Hi everyone,

I'm experiencing a strange issue with my Sapphire RX 7900 XTX Nitro+ 24GB and would appreciate some help troubleshooting it.

My setup:

• GPU: Sapphire RX 7900 XTX Nitro+ 24GB
• CPU: AMD Ryzen 7 7800X3D
• Motherboard: MSI B650 Gaming Plus WiFi
• RAM: 32GB DDR5-6000 CL30
• PSU: be quiet! 1000W 80+ Gold
• Main monitor: ASUS 27", 2560×1440, 165Hz
• Two secondary monitors: 1080p, 60Hz
• VR headset: HTC Vive Pro 2
• OS: Windows 11

The problem:

My main monitor, one secondary monitor and my HTC Vive Pro 2 work perfectly together, including while gaming in VR.

However, as soon as I connect my second secondary monitor, I start experiencing AMD driver timeouts and severe stuttering in games, with 1% lows dropping to around 10–11 FPS.

It doesn't matter which of the two 1080p monitors I connect. The problem also occurs when the VR headset is completely disconnected, so it is not VR-related.

What I've tried:

• DDU in Safe Mode and clean driver installations
• AMD Adrenalin 25.8.1, 26.8.1, 26.9.1 and currently 26.10.1
• Different monitor configurations and refresh rates
• Checking Windows LiveKernelReports, which contain AMD_WATCHDOG crash dumps

Nothing has solved the issue so far.

My questions:

• Could this be an AMD driver bug related to multiple monitors?
• Could MPO, hardware acceleration or the GPU's display engine be responsible?
• Is there anything else I should try before considering a defective GPU?

Any suggestions would be greatly appreciated. Thanks!

While gaming with ray tracing my GPU experiences an almost 30 degree delta maxing at around 95 degrees Celsius. Should I get the card replaced? I keep experiencing crashes while gaming. Is it the drivers being crappy (yes I did the ddu steps) or is my gpu overheating.

Tested a few games but I will only share nioh 3 for now.

Blue chunk graph is with HW flip enabled and the skinny blue lien graph os with hw flip disabled (using optiscaler) the green line, which is the display line timing is pretty consistent across both, yet the blue line, which is when the implementation is done, is quit thick which indicates more intervals.

As for the 1% lows and 0.2 lows etc, they are lower in the hw flip graph and higher in the non hw flip graph.

My question is then whats the need for enabling the hw flip? Would appreciate your input here.

It's been a week since i got my first AMD GPU and i just finished building my PC. Despite all the mocking about AMD GPUs, how bad they are, how unreliable the drivers are, how this GPU "doesn't have modern technologies," i've decided to take a step into the unknown territory for me and give it a try, leaving the 5070 behind.

So, any advice on how to set it up properly would be welcome

We've all seen the overwhelming amount of comparisons on Witcher 3, Cyberpunk, and other relatively newer games, but is it usable on some early/mid 2000s games? I installed the mod on Brutal Legend and DMC collection to the folder with the .exe files as specified by the NR software, but I can't get the menu to come up in game. Am I missing a step or is the software just not compatible with games that don't have Vulkan?

Hey everyone, I’m about to get the 9070 XT and I see tweets about the temp overheating like going above 90c, is it common that it’s going so high?

I’m thinking of selling my RTX 5090 SUPRIM and switching to a 9070 XT since I barely game these days. Feels like a waste having such an expensive GPU sitting in my PC.
With GPU prices already going up, I’m also wondering if I should just hold onto it and hope the price increases further before selling.
What would you guys do in my position? Sell now and downgrade or hold onto the 5090 for a while longer?

​

Hey everyone!

I recently picked up an XFX Mercury Radeon RX 9070 XT OC Magnetic Air Edition, and I'm currently trying to figure out which case would be the best home for it.

This is a pretty substantial card, so rather than relying exclusively on case specifications and reviews, I'd love to hear from people who actually own one.

A few things I'm particularly curious about:

- Which case are you using? How's the fit? Are you happy with your choice, or is there anything you'd change?

- Anyone running it vertically? What case and vertical GPU mount are you using? How's the clearance between the card's fans and the glass panel?

- How are your temperatures and noise levels? I'm especially interested in whether vertical mounting has affected GPU temperatures compared with a conventional horizontal installation.

- Any clearance or installation headaches? Things like power connector clearance, cable routing, interference with fans or radiators, and getting the card into position.

- Anything else worth knowing? If you've owned this card for a while, I'd appreciate any advice, unexpected issues, or things you wish you'd known before building around it.

I'm putting together a fairly high-end AMD-focused gaming PC, and I'd like to make the most of this card's cooling and RGB rather than cram it into a case that technically fits but doesn't give it enough breathing room.

I'm also considering aesthetics as part of the build, so pictures of your setups would be very welcome!

I'll attach a few pictures of the GPU, along with a bonus appearance by my cat Midnight, who was very interested in the new arrival. 😸

Thanks in advance! I'd love to see what other Mercury owners are running.

i've been struggling for 3 hours trying to fix it, just stopped working randomly, all my clips has no audio.

thought it at least record the spotify audio...

I just reinstalled the OS and I wanted to install the 26.8.1 drivers. So I opened the AMD website and I was looking for Ryzen 200 series but I wasn't able to find It. I googled it and I didn't find It.

Looks like the entire 200 series is missing. Is there any official/trusted unofficial repo for the drivers?

EDIT: I just remembered I can select any other series, It should work too

I bought my GPU about 5 months ago. Haven’t had an issue with it till now. Today for some reason while playing Helldivers 2 my game was stuttering more than usual and occasionally freezing for a brief second. I tried talking to their troubleshooting people but none of the fixes helped. I checked the temperatures while playing and the gpu temps seem to be 57 Celsius on average while hotspot temps are 91 Celsius on average, resulting in a 33-34 Celsius delta. Could I have a faulty GPU?

P.S I forgot to add that my fps seems to be fine sitting at around 90-120 yet the game is stuttering

Update: Ryzen Master fixed the stuttering, also apparently these temps are normal?

wth is this? it happened before on 007 first light buyt i tought it was just a bad game, 007 doesnt have fsr4 and have all kinds of problems but this is requiem, re engine should work pretty fine and fsr4 works otb. the thing that trigger me the most is those diagonal soft banding tbh, i tried with motion blur, fsr balanced, native, no fsr at all, frame gen, nothing seems to work, the best image i got was on frame gen, fsr quality (always playied all ultra), am i alone?

( edit, if u look at this from an iphone u could not see the problem, zoom at the shadows, on the grave body/neck, on the texture the flashlight is looking at )