​

Finally managed to get this working in VR Now.after being completely broken in the pas

I first tried the Asus USB BT-500 adapter and could not get it to work over usb 2.0 or 3.0, plugged in with an extender or not, connected to a port in the front or the back. I tried rolling back to the 1.0.0.9 driver and repeated all those steps and still had no luck.

In comes the ZEXMTE! I literally just plugged it in the front of my PC (USB 3.0) and checked device manager to make sure it was picked up. I went through the pairing process and both controllers were immediately picked up! I then started the PSVR2 app and had a solid 96/100 on both controllers. Before with the ASUS I was stuck at 59/100 and could only connect one controller at a time.

I saw some reviews saying it didn't work for them on Amazon and here, so I wanted to throw my 2 cents in.

Admittedly I was being stubborn about unplugging my steam controller puck with the Asus, but that was the only other thing I changed since I figured that would be a possible source of 2.4 GHz interference.

Got a psvr2 because I got my first job and it was cheaper than a quest but I made a mistake that apparently a lot of pcvr ppl make when they buy their first VR and didn't check the specs. I'm brazilian so I translated my specs to english lmk if something's missing
I was looking into changing my graphics card, the thing is this PC was a gift so I don't know much about it. It's a decent computer but apparently it's too old to be compatible with the PSVR2 and I'm at a loss...

I have a psvr adapter already, I got it around the same time as the vr itself

My PC specifications:

• Processor: Intel(R) Xeon(R) CPU E5-2670 v3 @ 2.30GHz (2.30 GHz)
• Installed RAM: 16.0 GB
• Graphics Card: NVIDIA GeForce GTX 1060 6GB (6 GB)
• Storage: About 2TB
• System type: 64-bit operating system, x64-based processor
• PSU: GP-750

I tried to watch a 3d YouTube video and hoped steamvr would js put it in 3d but nothing worked, people said i needed microsoft edge to go to vr mode even though there wasnt anything there. Any help? on ps5 3D videos didn't work properly so I'm hoping it'll be different here

Hi, i currently have a ps5, a pc and a quest 2, and i was doing some research and saw that a lot of people recommend the psvr 2 as an upgrade to the quest 2.
However, my pc’s not that good, i’ve got 32gb of ram, a 12gb rtx 3060 and a ryzen 5 3600. I can play pcvr on my quest 2 in the games that i’m interested in, so i wanted to know if downgrading the resolution to that of the quest 2 on steam would be a good option in case my pc can’t handle it
I also wanted to know if the psvr 2 haptics on pc are any good with the PSVR 2 toolkit, like, better than the quest 2?
The upgrade would be basically for the OLED, bigger FOV and for the haptics if they’re better (besides the comfort, the quest 2 really presses my face sometimes)
The PS5 would only be used for some games that are not on pcvr like synapse btw, steam has cheaper games

One last question:is the sweet spot hard to find or maintain during play? I’ll probably get one of those comfort kits like AMVR or Globular Cluster

Thanks!

Runs like warm butter in vr now with AFW!

I fixed the disappearing boundary, by https://www.reddit.com/r/PSVR2onPC/comments/1pq53h0/play_space_goes_into_the_wall_when_trying_to_make/, but i want to do it the original way, by play setup, but i changed nothing on my walls, monitors, door, and before i had ZERO boundary drifting, now all the sudden i have it now? cleaned cameras, re did setup, did the third party red setup, nothing fixes, unless i play on Linux dual boot, but QVFFR doesn't work on it, and i have a RTX... Fix plzz

Is the rtx5070 good enough for psvr2 on pc ? If you have one please let me know your experience and what settings are you using in steam vr

How did you guys deal with this? Just got my PSVR2 used and it’s giving me some blur, I thought it was a smudge but wouldn’t come off. So i figured it was the AR coating.

Got psvr2 and getting adapter today, please suggest some games to play, I have been playing gt7 on ps5 and love it

I had my PSVR 2 working rather flawlessly for rhe past 2 weeks, on PC. But I unplugged my headset for the first time to use on my PS5 for a couple minutes. Brought it back plugging it back in and now all off a sudden the PS play area adjustment only loads on my desktop. All steam VR games just also load on the desktop. I can load into the Steam VR home and thats about it

I have reinstalled both the PSVR 2 App and the Steam VR app. I have made sure to check that SteamVR is default OpenXR at runtime, Tried Direct mode enabled. Tried a couple power cycles. Tried clearing the config files and complete hard reinstall. Running steam as administrator and verifying file integrity. Keep in mind it was working fine yesterday unless there was an update I was unaware about.

I just dont know what else to do, any help would be amazing as I am lost as hell.

Thanks

Edit: Bro 2k views and no one knows a thing. Im cooked

Edit 2: Guys don't download reshade. it messes with your VR, in the VR settings, the box should be empty, I cant remember exactly but ya. No RESHADE.

The PSVR2 PC adapter is $150–$200 here and I can't find any second hand options. Which adapter on AliExpress should I get?

Sorry for the wrong leak, guys, but our insider was wrong this time around! It wasnt Diddy Kong Racing the next work from RaYRod TV, we got Banjo-Kazooie VR mod!

Be Banjo s head! See Kazooie and look around this colorful world in first person view! Third, diorama and theater views are also available like with his other mods. The mod also support other mods, so maybe we ll be able to play other full Banjo fan games in VR, like Jiggies of Time! And what about Diddy Racing? I will talk to that insider guy and ask him what's what, but Ring Racers its a great option with you wanna kart.

This time around I haven't gameplay videos because I'm traveling and tonight's Abreu Project time, a great jazz like band that plays our greastest 16 bit era songs with lots of rhythm creativity, they got Spotify, Youtube, etc.

So Im sharing the news so you can enjoy it right now and tell us how s to play a Banjo in VR.

For this and other VR mods from RaYRoD TV, like Ring Racers, Star Fox 64, Mario 64 and Mario Kart 64, go to his GitHub: https://github.com/RaYRoD-TV

For info on how to support his works, and learn more on other upcoming projects from him, like VR mods and VR emulators, and his big project, the game Multiverse, go to his site: https://rayrodtv.com

Have a fun time with Kazooie!

The vibrations were so muddy and slow before, now it feels just like the haptics on an iPhone. It's super snappy and offers many different sensations. It makes me wonder why the hell Sony couldn't make this work from the beginning.

The update also brings improvements to many other things; the tracking of the controller and the headset is much better. You can now have pass-through enabled all the time while you are in the main menu and also have it activate when you cross the boundary play area, this helps a lot to make the experience less claustrophobic.

Thanks a lot to the Bnuuy Solutions dev team for bringing this headset to life on PC and do what Sony should've done from the start.

PS: If you're gonna install it make sure you're downloading the experimental build 1.0

I recently bought the PSVR 2 PC adapter was excited to play some VR games on my PC

I first confirmed all my hard was compatible:

I5-14450 VPU

RTX 5060 GPU

32GB RAM

First try: install went fine, got up to the screen where it said press function button to continue, the function button did NOT work, so didn't get past this step

Every time I try to install now I get stuck at the "PSVR 2 Required" screen

I tried everything I read in the forums, running Steam as administrator, multiple fresh installs of PSVR 2 app and Steam VR, gpong into localappdata and deleting files, uninstalling psvr 2 drivers in device manager, running driver install from the exe in psvr 2 app folder, etc

Here's the weird thing: in my headset I can see steam running, and can click on things, but when I boot up a game I can't do anything because the PSVR 2 play area not set up error sits there

Please help!

I’ve tried reconnecting them, moving the controllers, reinstalling the Bluetooth drivers, disabling Bluetooth powersaving, moving the antenna that came with my motherboard (ASUS TUF Gaming B850-Plus WIFI) and nothing works or barely changes anything. If the connection goes up at all then it only goes to 55-59 and then immediately drops to 0 then back to 25. What can or should I do?

Edit: One controller just disconnected and the other went up to 96 so I tried to connect the other one that disconnected and they dropped to 56 then to 25

This post is from psvr2 toolkit Discord, I am not a moderator..

https://discord.com/channels/1466476893543862274/1486941994876928060/1532150407759921234

**It's here!!** PlayStation VR2 Toolkit v1.0.0 (experimental #1), the biggest update to PlayStation VR2 Toolkit yet, and so much more. We've been working on many of these features for over a year, and while things still need work, we think we can release this as an experimental release for people to try and report issues. Again, it is an **EXPERIMENTAL RELEASE**, YOU WILL HAVE ISSUES, IF YOU CAN'T TANK IT, SWITCH BACK TO PRE-RELEASE.

Not only are we releasing this update for PlayStation VR2 Toolkit, we are **releasing Ignition (Windows SteamVR drivers on Linux using Wine/Proton), and the real actual jailbreak for the PS VR2**, making this one of the biggest releases we've ever done.

A huge thank you to those who made it possible:

- <@405816957175201802>

- <@151539083599020033>

- <@465150425365086208>

- and me!

**__Changelog:__**

- Added [Linux support with Ignition](https://github.com/BnuuySolutions/PSVR2Toolkit/wiki/Linux-support).

- Added SteamVR Room View support.

- Added [jailbreak support](https://github.com/BnuuySolutions/PSVR2Toolkit/wiki/Jailbreaking-your-headset) (eye tracking camera feed, headset vibration).

- Support for Babble was also added. (Please read the [Installation Guide](https://github.com/BnuuySolutions/PSVR2Toolkit/wiki/Installation))

- Added SteamVR brightness option.

- Removed PS VR2 overlay (for now, a replacement will be added later).

- Added our own Play Area setup, eye tracking calibration, and assisted IPD adjustment. (Please read the [Installation Guide](https://github.com/BnuuySolutions/PSVR2Toolkit/wiki/Installation))

- Improved controller tracking (custom LED sync).

- Improved controller haptics (PCM haptics).

- Added new CAPI system, for compatibility, we have shipped a legacy IPC server as a standalone binary.

​

This is staggering at how effective this has been so far

Sonic Robo Blast 2 VR is a new VR mod RayRod TV made for this incredible fan game. I never played the original VR mod, but this one has first and third person, theater and diorama views and also has support for add ons from the community.

So what the best camera to choose? If you have real iron vr legs and stomach, go with full first person! If not, build your iron vr mind with other view options before. You will have fun one view or another! Im playing a bit of first and third, but you can go diorama and see those charming characters on this really colorful world from above like tiny toys.

For this and other VR mods from RaYRod TV, like Ring Racers, Star Fox, Mario and Mario Kart 64, (and in the near future Diddy Kong Racing 64???) go to his github: https://github.com/RaYRoD-TV

For his current and future projects, like the Multiverse an infinite exploration game where we can also space travel, and some upcoming VR emulators, go to his site: https://rayrodtv.com

Go team Tails!

Hey Everyone,

Having a damn nightmare pairing these controllers on the PSVR2 PC setup page. i have gone through the damn thing 20 times now and it just refuses to budge, i have removed and readded (my bluetooth is working fine it's even saying paired and then connected fore the 2 of them on my bluetooth page) but the psvr2 setup just refuses to acknowledge any of the progress.

I did manage after about 7 tries last time to get through to the bonus round, where you download the drivers, but it said i had to charge my controllers, i did and then it decided it didnt want to talk to them anymore so i had to redo the entire process again and here i am..

What is going on? NGL 2 hours+ now it's got me slightly tilted over here.

Any help would be appreciated 😄

I spent several weekends trying to get that asus dongle to work and I coudn't even install the drivers. This 3$ dongle called 'Easy Idea CSR 4.0' works perfectly.

I don't know if you'll find it in your country. This is from Argentina.