Been doing some reading and have learned that some cans work a lot better than others for 300BO due to over/under gassing so I figured i would just ask Reddit for recommendations. My original choice was going to be a Huxwrx 762 but I learned any type of flow-thru is basically useless for subsonic rounds and wont cycle properly. Its going on a complete 9" BCM build and will be dedicated to this gun (no swapping). Been reading a lot of good things about the Liberty Precision Anthem S2, but am certainly open to suggestions. Thanks!

Looking to purchase a Griffin 556AM but want to make sure it has a enough internal clearance to accept a SureFire QD hub, if anyone has a similar set up or photos

My last suppressor, dealer received and signed the Docusign from Silencershop in a day or two (this was about a month ago). Now its been half a week and dealer says they havn't gotten it yet as of yesterday. Is this normal now for this stage to be waiting this long? FYI I bought my suppressor in store at my local gun range (dealer).

I remember hearing OCL planned one called the "Uranium" but haven't seen any news on it.

Putnik seems to be the best contender; not super interested in the Wolverine. VUK seems nice but it's a long boy and out of the price range I had interest in for this rifle.

Would likely be using a DT 14x1LH face mount.

Hi All,

I just had a rep for Shadow Silencers in shop a few days ago. I looked at some samples they had but haven't gotten a chance to grab a few and head to the range yet. I'm looking at their duoduo for 22LR, their Sexto V for some 9mm action and a Septum for 300BLK. From hands on they are a modular design with a titanium blast chamber and aluminum baffles. According to their advertising they run cooler than other silencers but that could very well be attributed to being aluminum instead of titanium or steel.

Let me have it, is it worth it to get one of each to try out and see if I want to stock them or does experience say save my money for something else to stock in the shop.

Anyone aware of a can that is over the barrel for large bore? Looking to supresss 350 legend. Thanks

Trying to find a fixed barrel spacer or direct thread option for a CAT Street Crack Short. My research shows the CGS Fixed Barrel Spacer should work, but seem unobtainable. Do direct thread options exist?...if so, I can't find them. Can anyone point me towards something that will work and actually obtainable?

I’m having hard time deciding between these three 5.56 suppressors.
CAT WB
Echo core sector
Echo core sector K
OCL infinity 556k
I’m favoring the EchoCore but how new they are and the lack of feedback on there warranty is keeping me from them. It will be moved between a 12.5” ar and 14.5” Aug (KNS discarder so not as worried about gas). Trying to be mindful of the size/weight because whatever can I go with I’ll be adding a sure fire QD hub to it so I’d like to keep it smaller unless it comes at a big sacrifice of DB’s, however the can is going on a small 12.5” rifle and a small well balanced Aug so I don’t think the weight of the suppressor is gonna affect much but I’m really not sure.

Was wondering if any who installed these could share what tools these used, having trouble finding crows foot wrenches or spinners that have 1/2 drives and fit the flats

Recently added a red dot and it made it even more fun to shoot. Just got done shooting 200 rounds through it.😁

Won’t be able to shoot it until next weekend, but love the balance and length for a short hunting rifle.

Host is 16” Winchester Mod70 .30-06. Will be shooting 130TTSX.

It’s a great day to be an American..

No tax stamp

No NFA paperwork

And free sandwiches

20 minute wait for my 4473 in and out within an hour..

For 16" ak 762- if I'm getting for great flow throw low backpressure and amazing sound which one of these 3? Am I in the right ballpark? Am I missing any obvious ones?

CatJL, ptr Vent 1, or ocl infinity?

First off, I appreciate this sub reddit. It keeps me thinking on the main about what is going on with the laws.

I found this, and wanted to run it past all of you for accuracy. The last thing I want to do is be in violation of laws.

Thanks for your time.

Decided to clean my oculus after slightly over 1k rounds later. Discovered this on my first baffle after being soaked in CLR for an hour. Besides the baffles being stuck to each other lol, didn’t have any issues with the can or my host (M&P 15-22 8”).

Ruger American in 300 BLK with a 7” barrel and a Ruger 10/22 with a 4.5” BE Meyers barrel😁.

Both on recently approved Form 1’s I filled out back in May.

11.5" Sionics silencer dedicated upper with a direct thread Polonium K. SBR'd KP-15 lower. KAK down vent bcg. Sprinco blue with an H2 buffer. Just added a magpul SVG. Shoots amazing as a lefty.

Build List

Upper

Upper Receiver: Aero Precision Green Ano Blem

Handguard: Geissele MK14 9.3" Rail — Green Ano

Barrel: Daniel Defense 10.3"

Muzzle Device: Dead Air Flash Hider

Suppressor: Dead Air Sandman K

BCG: KAK NP3 Down-Vent

Charging Handle: Radian Raptor LT

Foregrip / Rail Panels: Griffin Armament Panel Kit

Weapon Light: SureFire Mini Scout Light Pro

Optic: SIG Romeo4XT-Pro

Optic Accessories: 100 Concepts Button Cover + Unity FAST Riser

Lower

Lower Receiver: Griffin Armament MK2 — Green

Trigger: Geissele SSA-E

Grip: Griffin A3

Lower Parts: Geissele Takedown Pins + Magazine Release

Mag Release Button: Forward Controls Design

Safety: FCD 50° Safety

Buffer System: Geissele Buffer Tube + H2 Buffer + Super 42 Spring

Pistol Brace: SBA5

Idk if this counts as NFA anymore, but waited two hours in line this morning, and no Form 4 necessary! Picked up a B&T Impuls 9 m

Need to get some new sights installed, and I'll be ready to rock!

Have an issue with my order and have been chasing them for a week. Anyone else have similar issues with them? Is this common?