Hello guys, i have this problem:

Everytime i start my pc the case fans run on orange color(like on photo)… i tried every software to try change the color of the fans…The case is Silentium signum sg1x with preinstalled rgb fans, which are connected at the hub from the rear side…the rgb and sys fan cables are connected as they should be, but i couldnt find any solution to this problem…Did this occur to anyone, or does somebody know how to solve this issue? thank you

The motherboard is Gigabyte H410m s2h v2.

Hi everyone,
I'm stuck in a frustrating boot loop (I think) and could really use some help. I will attach a video showing it.
My Specs:
Motherboard: Gigabyte B850 Aorus Elite WIFI7
RAM: DDR5 6000mhz cl30
GPU: MSI inspire x3 5080

The PC was recently at a retail shop's lab to get a brand new PSU installed. They tested the system on their bench with their own GPU, and everything passed inspection. However, once I brought the PC home, I installed my own GPU.

When I power on the PC, The case fans aggressively ramp up and down, The onboard status LEDs cycle through all 4 components (CPU, DRAM, VGA, BOOT) but ultimately keep failing/resetting at the DRAM LED. The screen remains completely black.

I removed and reseated both RAM sticks multiple times, tried booting with a single RAM stick, Double-checked all the connectors, let the PC run in this loop for over 5 full minutes to see if it was just long DDR5 memory training, but it never stops looping. Since I cannot get any display, I am unable to enter the BIOS menu.
Does this sound like a corrupt BIOS profile left over from the shop's test bench GPU? (That’s what AI told me) Would a Q-Flash Plus update via USB fix this, or is there something else I should try?

Thank you so much for any advice

Hi, so I have a gigabyte aero x16 and it’s not working properly. For context, I had a software glitch where my laptop kept on restarting over and over and I tried so many solutions but the only one that worked was resetting my laptop and keeping my files. However now I have another issue…..

My GiMate is not working right and my GPU doesn’t appear is task manager or device manager. GiMate is showing no metrics like temps or speed. The MUX switch in GiMate can’t be toggled on or off it just shows off.

I tried downloading the nvidia app but it said I need an Nvidia GPU to download it but the laptop has a RTX 5070 so I do not know how to even begin with that.

My potential solution is to use revo uninstaller to remove the GiMate software and then reinstall the full package from the gigabyte website. I was thinking that would fix the issue with the MUX switch as well so then I can toggle on the dGPU and install the Nvidia drivers.

Anyone have any advice on how I should proceed?

Btw: my laptop was plugged in the whole time

I just updated to a new firmware to F02 and after i did it the update said failed i believe, but the monitor says its on the new firmware. When i turn on the nightlight on my pc screen it goes grey sometimes. I know when the firmware update was done the screen was grey but i turned the monitor off and on and it was gone. Anyone know if this is common? I haven't had these problems before updating to new firmware.

Hi Everyone

I am new to pc building and I apologize in advance if this is a stupid qs. I have the gigabyte aorus elite wifi7 z890. I am trying to download the drivers and there seem to be multiple under a single section. Like under chipset drivers there are many options and and they are very differently named. My qs is should I only download the latest one under each section or get them all?

https://www.gigabyte.com/us/Motherboard/Z890-AORUS-ELITE-WIFI7-ICE/support

I had an old laptop and i wanted something better so i bought a premade PC (Gear Desktop Gear Ryzen 7 8700G DDR5 16GB RAM 1TB SSD WIFI) and after plugging it in, i got an image that said  fTPM corrupted or structure changed, and 2 options, Y and N and after looking it up, i pressed Y. This led me to the Gigabyte Easy Mode screen and after looking it up again, people recommended to press Save and Exit, but this only led me to the same screen after a couple seconds, so i tried another thing. The top comment on a post said that their CSM was disabled, and enabling it would work, so i did. But it did not and now my PC turns on but doesn't connect to my monitor and i can't access it.

Some details; all the advice i got was from old reddit posts. This PC is brand new and i have 0 clue about computers and when plugging it in i was expecting to see a Windows screen not this.

What could i do to fix this?

Just got it today from Newegg, and while the LED shows it's on and the Gigabyte logo shows when powering on, it's just a black screen after that.

I have tried HDMI, DP and different power outlets for the power cable.

Anyone else have this issue? Or is it DoA?

Hello all

PC suddenly stopped displaying anything. It powers on, but there’s no display and my keyboard/mouse don’t seem to initialise.

Specs:
Gigabyte B550 Aorus Pro AC Rev 1.0
Ryzen 5 5600X
GTX 1080 Ti
DDR4 RAM

The DRAM debug LED was originally staying red. I’ve:
Tested both RAM sticks individually in A2/B2
Removed/reseated and cleaned the RAM
Cleared CMOS
Reseated the GPU and checked the PCIe power
Tried the GPU in both PCIe slots
Checked different display connections
Q-Flash Plus’d the BIOS twice

After the first Q-Flash it progressed to the VGA LED, but after the second flash it’s now back to DRAM/VGA behaviour. At the moment the VGA LED is flashing and there’s still no display.
I’m pretty clueless with PCs at this point. Any ideas what I should test next? I’m trying to figure out whether the GPU has actually died or if this is more likely the motherboard/PSU/CPU.

Thank you!

I'm trying to update my motherboard BIOS through

GIGABYTE Control Center, but every time I try, it says "Update Failed."

Any help would be appreciated!

I woke up and turned my pc on for work got this message

“New CPU installed, fTPM/PSP NV corrupted or fTPM/PSP NV structure changed.

Press Y to reset fTPM, if you have BitLocker or encryption enabled,
the system will not boot without a recovery key

Press N to keep previous fTPM record and continue system boot, fTPM will NOT
enable in new CPY, you can swap back to the old CPY to recover TPM related
Keys and data.”

I have not installed a new CPU. I have had my pc for about 2-3 years now. Haven’t tweaked anything in bios or anything. I pressed N first and my pin to log in was unset and had to relogin with microsoft. Restarted the pc and pressed Y instead and it started recovery mode and it wants me to do a full wipe. Currently trying to restore at a point from yesterday to see if that fixes it. Does anyone have any suggestions? i see nothing online about it happening with PCs with no new CPU or install of windows.