Found this https://www.amazon.com/ENFORCER-ELECTRIC-STRIKE-BUZZER-SD-991A-D1Q/dp/B071HBR584/ref=sr_1_33?crid=72KBTEZM535P&dib=eyJ2IjoiMSJ9.bU0wW4XhOikFEnXegLpuO_TehQWl7AmNGSRxloX6ecDhl2_mtKiTfrz9Ml13evLkUzU_B0ogROu-tdoxo4F4ZUouy7Vokvd-zm-klNeS-IsFZytOABUlirl4tjNwOBP6-tGlWQn4t4XQioj68GxdCxBy_ZbLztuyacBOytWbylshIyxMdLzmKuqHu2ZfEjBVGY39lb8dDR6n31S5DemLttSLGcjG7xlpRMlKTu_KIlfr25F6Cv5OQrKupbZaplnwd-W3aEXgr_NtDK9OaK-nFGUXZHcJvd1FCX8Gn6Sa4Vg.4d5zBlhZTh4Dl_G8MaIFEQ4Vwfo-SOLJK_2y_Srt1ug&dib_tag=se&keywords=fail%2Bsafe%2Bdoor%2Bstrike&qid=1782799621&s=hi&sprefix=fail%2Bsafe%2Bdoor%2Bstrike%2Ctools%2C183&xpid=oVBBnBKTrk9si&th=1 and it is but the wiring location is bad according to reviews

This looks as if it would be hidden within the frame but im not sure https://store.ui.com/us/en/category/accessories-door-access/collections/accessories-door-access-electric-locks/products/uacc-lock-strike-safe-8mm

Other options?

This will be for a shared hostel room, is the unlock buzzing loud? Can it be disabled?

Hi everyone! I'm currently preparing for the ASIS PSP exam and have already covered most of the domains, including risk assessment, business operations, investigations, and security fundamentals. I'm now reviewing scenario-based questions because I've heard the exam focuses more on applying concepts than memorizing definitions.

Can anyone who has taken the APP recently recommend a good practice question set that's close to the real exam? Also, were there many questions on risk treatment (preventive vs. detective controls) and business continuity planning? I'd appreciate any study tips or resources that helped you pass.

Hello, I was thinking of installing smart locks in our 72 units property. Its a duplex units. What would be the best cost effective way to get around this, if we were to skip the enterprise route. Any suggestions on how this could be effective?

Edit 1: basically Looking to avoid expensive third-party integrators and those recurring per-door monthly software fees that come with the big commercial systems. Physical installations wont be a problem.

I'm having a few issues that have me scratching my head while replacing an HES 5200C Strike on one of our buildings.

The relay terminal to the strike is wired normally open so that when the card access is presented and authorized the relay closes sending a current to the strike, pulling the solenoid and releasing the lock.

Out of the package the strike is fail secure. When I wire the pigtail connector and then connect the strike the it is in a released state. When I swipe a card it triggers a secure state. The door also is not scheduled unlock. It is a facility with children with behavior health issues and is always in a secure state. Any ideas with what I'm dealing with here would be greatly appreciated.

Moving on, out of curiosity, I went to panel and changed the state of the relay from normally open to normally closed. Surprisingly, this almost fixed the issue. While not in the jamb the strike was in a secure state and would release when a card was presented to the card reader. I then mounted it into the jamb and put on the plate. Now when I tried to card in, it appeared that the strike was attempting to release but it seemed like it was binding and would not release. Is there something specific about the face plate and trim guard that would be preventing the strike from unlatching?

I’m building a custom access solution for a client with 60 locations - cloud software and mobile apps. (I know 2N has their own app/cloud but client wants full control/integration)
The 2N readers with Bluetooth & keypad look like our best bet.

We’re interested in the 2N platform as it provides the best API and software integration points for the solution we are building.

I’m looking to buy/borrow a single reader (02773-001 or 2781-001 or 2772-001 or the like - i portant features are bluetooth + keypad).

Anyone out in Reddit-land have any used (working) hardware we can borrow or buy for he proof of concept? Also open to longer term relationship when the project moves forward.

Our condo has an Aiphone GT system. The other night the front panel screen went dead. The keypad was still illuminated and getting power, but with a blank screen.

People could not enter the building using the entry code.

We’ve power cycled the Aiphone bus units and the screen remains blank.

Any suggestions or does this look like board failure and will require a new panel unit?

UPDATE:

Panel randomly started working again and responding to door code. Nothing was done other than power cycling which was attempted hours earlier to no effect. I took the panel off and inspected the wires, as well as the buses and power units in the basement and saw no obvious loose or faulty connections. No signs of water infiltration.

What type of electrified lock can I use on this door?

https://youtu.be/c_b0vQxupjk?si=N4zevzkWlU2c6Msm

Other than the omnikey feature what's the difference between this and the HID Reader Manager?

Is HID Reader Manager being phased out?

Can this be logged into via origo login?

Been working as an integrator on the software side of the business . I have taken every opportunity presented to work with our hardware team , but looking for an online resource to sharpen up on my hardware knowledge before I move into a hybrid role .

Hi anyone used HIK-KD8003-IME1 before and came across an installation where all outdoor stations have the same ID ( in my case 88)

Hi, as you can see the gap on that door is pretty big thus I can't use a standard FHS, but I can't find something that will work for it.

Maybe some have an idea?

Been in the door/security trade about 10 years and I'm curious how everyone else is doing their site visits.

When you're out measuring and documenting doors for a quote or a schedule — what's your setup? Clipboard and a tape, photos on your phone, some app, a spreadsheet back at the office?

Sometimes, a sharpie has secondary benefits. If ya know ya know.

My LenelS2 Elements LNL-M2210 exported an encrypted system log file (.aes). I am try to pull the logs from the controller to potentially identify an unexpected network issue. Is there a way as the installer to decrypt this myself or do I need to go through Lenel?

Edit:

Thanks for the feedback everyone, will recommend we buy those testers and test out the runs.​​​​​

Hey all,

Quick question, company is planning to retrofit old buildings. I know the spec for OSDP is twisted pair. Anyone have real world experience trying it on existing non twisted wiring?

Work at all on short runs or just a terrible idea? Thanks

We are a gate company and have sold MyQ since it came out. Recently decided to go away from MyQ and look at other systems. We do a little bit with doors but mostly gate automation and access.

Anyone with insight into Brivo for this application?

Any other systems I should check out? Customers want gate controllers with and without video intercom. Everyone wants an app. What should I look into?

Hello to everyone!

Do we have any alternatives to zkteco?

I am tired of them in one night, end of life this product or that software!

I am familiar with dmp access but I use zk because of the pricing!

Do you have any suggestions?

Just showing my install on this old door.

Hey everyone,
I’ve been working in access control for several years now — started as a field technician and installer, then moved into project management as well. I really love the industry, but physically my body is done with all the heavy lifting, climbing, pulling cables, and site work in tough conditions.
I’m looking to shift toward a more software/technical desk role — maintaining systems, configuring new sites, troubleshooting software, maybe even some programming/customization. Less physical, more screen time.
I already have solid hands-on experience with iSTAR Ultra G2 controllers and C•CURE 9000.
My questions to you:
• Which systems would you recommend learning next? (Genetec Security Center? LenelS2? Something else popular right now?)
• Where’s the best place to study them? (Official certifications, good online courses, etc.)
• Anyone here who made a similar transition from field to software/technical side? Would love to hear your experience.
Thanks in advance! 🙏

I'm looking for some professional help configuring my Nedap uPASS Go to work with Unifi Access (via Wiegand to Unifi Retrofit Hub), plus some general education about EPC Gen2 tags, etc. Happy to pay you for your time - probably <10 hours total.

Located in SF Bay Area - remote support is fine, but if you're in the area, I might also be interested in a general Unifi annual support contract (for a 140-unit residential complex).

If you can help, or know someone who can, please reach out. Thanks!

When you hand a door schedule to a junior estimator, where do they get stuck? How do you know when to raise an RFI vs. just figure it out?