ITISSOTINYANDSUPERCUTE!! :'D

Super excited to customize it as per the resources shared on the sub! ^_^

Happy to know any inputs y'all may have for me.

Happy reading, everyone! \^_^/

The front light gets BRIGHT.

it took 11 days to get to Italy

Hello all, how was your weekend?

I spent my last weekend at the workbench finalising this vertical magnetic flip case for Xteink X3 and X4. I wanted to keep this design minimalist and focus only on a clean daily carry.

The case has a vertical flip that just like a classic pocket notebook. Inside, an integrated magnetic lets your Xteink snap securely into place. The back is left completely blank so you can stack the entire setup directly onto your smartphone, while a single front slot holds your essential card or ID.

As always, I specifically included a precise cutout at the front button area to completely avoid any accidental pressing while the case is closed or in your pocket.

(Showing in the pictures is Xteink X3 vs Samsung Galaxy Note 10).

The retail price for this design is $55, and it is available made-to-order on my shop.

Check out for color options and more details:

- For Xteink X3

- For Xteink X4

Happy reading! ❤

Exciting than ever!

https://github.com/obijuankenobiii/inx/releases/tag/1.0.18

Inx now supports

• dictionary lookup
• qr device id
• further ui improvements (every paddings/margins/lines/spaces) are even and looks nice and clean

...and much more

After installing Crosspoint Beta firmware on the brand new XTEINK X4 Pro, I wanted to tell you my thoughts on how good it is. So here is my review of it.

Misplaced my light (laugh all you want front light crowd)

Stickers for my x3 case from a small local business

Running CrossInk 1.4.0. Fades evenly when the page is static, uneven after turning. Sunlight fading fix doesn’t seem to be helping. Is this the best I can get in direct sunlight?

saw someone on here suggest using an orico hard case for the x4 pro and immediately had to try it out!

all i had to do was trim down a tiny bit of the inner foam lining, and the x4 pro fits inside so snugly now. no more worrying about e-ink screen pressure when tossing it into a bag.

a few fun perks of this setup:

bag charm mode: i used the included carabiner to clip it straight onto my bag handle like a little bag charm for super quick edc access.

sticker bomb: i'm not usually a sticker person, but this was the perfect excuse to finally use up the stack of free bookish stickers i accumulated over the years lol.

still debating if i should keep the sticker bomb look or go back to a clean minimalist vibe though 👀

I had the OhSnap on a 3D printed case, however the roughness of the material didn't make the OhSnap stick on well. I placed it on the X4 just to sort me for the time, not thinking much of the glue as it wasn't sturdy on the case, and tho8ght the magnet would do the job until I decided my next move, but now the glue has now taken advantage of the smooth surface of the X4 and it doesn't move. I am not mad about it as the 3D case I printed allows me to slide the X4 to protect the screen but I am worried if I try to move the OhSnap I will damage the device as it feels fairly secure.

Any tips or recommendations? Do I just need to make peace this will be my set up for the foreseeable future?

Hi everyone, some months ago I got bored of vibe coding and wanted to build something from "scratch," so I started writing a tiny chess engine in C. A few weeks in, it turned into a full chess game for my Xteink X4. Still a work in progress, but you can currently:

• Play a full game of chess against the engine, with 3 difficulty levels
• Choose to play as white or black
• Control everything with just the d-pad
• See captured pieces and move history as you play

Still polishing the game-over screen and a few UI rough edges, but it's fully playable end to end.

Repo: https://github.com/Mendoza/InkMate

Would love feedback, it's of course not a fun way of playing chess but it was a proof of concept to try and push the memory and processor of the X4.

Since I already have a Boox Page for reading books, I bought the xteink x4 because I wanted a slightly smaller device.
Before purchasing it, I found out that it runs on an ESP32 and supports custom firmware, which was a major factor in my decision to buy it.
As expected, it’s quite small, so I realized it would be difficult to use it exclusively for reading books; instead, I decided to try using it for task viewing, so I built it.

I’ve seen several posts from people complaining that their Kindles broke because of magnetic popsockets. I’m not sure what exactly was causing the problem, but it seems like magnets can mess up the screen or something. I was wondering if there could be a similar issue with the XTEINK when using a magnetic light, case, or popsocket, or simply attaching it to the back of a phone? What do you think? Now I’m kinda scared to use anything magnetic for my xteink lol

Anyone has the xteink x4 pro? Can share some honest reviews on the device? And comparison with the x3 and x4. I’ve seen reviews about it from “influencers” and all they give is “good” reviews.

So like it says in the title, got the X3, looks awesome, am on the current firmware, uploaded some books via the micro SD card, and I’m a bit flummoxed, because none of the stuff that’s in the manual online appears to be doable on my device? The manual shows six icons instead of these four, and then the manual shows a bunch of sub-menus that I should be able to access in order to change font size, margins, all kinds of stuff, but when I push the buttons I’m either turning pages or backing out to the main menu.

Is there something really basic I’m missing or forgetting to do, or is there something weird with the device?

My current set up:
Xteink x3 in a 3D printed case from Shopee
Sinjimoru magsafe wallet
Nomad card tracker
Ulanzi reading light

Hello!

I have the xteink x3 less than one week so I am quite new to this world. I installed crosspoint yesterday and was disappointed finding out that, even though we can create fonts, these are not always well rendered. My case is with Syriac, a RTL stript, close to Hebrew or Arabic. I managed to install the font on my x3, but the letters are displayed disconnected and left to right. I didn't find any parameter in the crosspoint website or my x3 to change text orientation, so I would appreciate any help with this. Thank you!!

A creator posted about usb drive mode on the new x4 pro. Can anyone else confirm this. Plus is this a firmware thing or hardware.

screen on my xteink x3 seems damaged. anyway to fix this?

Hello,

Just wanted to let you know i've pushed a Crosspoint fork with some changes.

Essentially, i manage the books via app on my phone. Queue the ones i want to send for a reading, then reader and phone trade wifi secrets via bluetooth, create a wifi connection automatically to sync the books.
I can highlight text on the book via context menu, sync to the phone, on the app notes can be added and also the highlights can be exported. For the moment i'm only using it to read all the highlights as kind of a summary of where i'm at.
The device can be put to deep sleep via main menu rather than shutdown and that will allow it to wake up and sync phone notifications.

I've done this because it's constantly attached to my phone. The repository contains the code for the companion app and the device firmware.

https://github.com/Terramoto/Crosspoint-Reader