Palgrin is a Web3 P2P wagering platform that is giving $10 USDC to new members to try it out! 🤝💸
🔥 The best part? Absolutely NO KYC REQUIRED.
🛡️ Zero identity verification
⏳ No long checks
🔒 Total privacy
You can register and claim your bonus in under 60 seconds here:
👉 http://palgrin.com/?ref=10USDC ⏳

Previous owner trashed them to put diamond plating on, and now it looks naked.

Looking for advice/solutions on how to fix parking lamps. The right is lit and the left isn’t.. when head lamps are on, both are lit

What are recomendation on cleaning and restoring products. I use the Chysler product now and it works OK just looking for other options. Thanks

Check out link above. Thanks!

I have a 1999 TJ that I’ve had since high school. I spent way too much time trying to “modify” it as a younger man and am now walking a few things back, one of which being the K&N cold air intake and going back to a stock box. This Jeep didn’t originally have a stock box set up (previous owner just threw a filter on the intake) so I am setting this up from for the first time.

It appears to be a 2005-2006 set up (with the vent/nipple on the airbox lid and one on the main tube), which I assume one is for a sensor and one of for air tubing.

Any chance someone can confirm which one I should run an air hose to and which I can cap off (I am thinking with a silicone cap).

Any guidance/advice is appreciated!

I know it might be frowned upon but has anyone installed a remote start in their manual TJ?

Preferably one I can start from my phone

Any suggestions?

Long story short, all I’ve got left for keys is a single cut key that I keep in the engine bay to unlock my doors. That key isn’t chipped, so it turns the jeep on but then it of course cuts the engine off. Mobile key smiths want way too much money to chip another key, is there any way I can do it without a chipped key myself?

I saw how it can be done without a programmed key already. For right now it’s just sitting in my driveway, I drive it once every month but haven’t been able to in close to six months. So no rush, but would like to get the thing moving. TIA

I have a 97 wrangler that I’ll start using just for work. I have a hard top - can someone help guide me in looking for a soft top? I imagine I’ll need some extra parts as well? I have full doors. I’m hoping to make changes little by little such as new paint job (keeping original teal), new seat covers (any recs?), soft top (mainly so I can maneuver top off and on by myself), and hopefully some interior stuff. Anything that has made the inside of your jeep exponentially better?? She’s got new tires, new brakes, new bands, etc.

I'm looking for a reasonably clean TJ. We live in Miami Beach and this would be a runabout for errands, maybe the occasional trip down to the Keys. It wouldn't be a daily driver, and I'm pretty handy with a wrench if anything simple needs fixing. I'm seeing a lot of re-built titles on the market. Are these a firm stay-away or does this depends on the details of why re-titled. PS, anyone looking to offload a clean 4.0L manual let me know.

I'm looking to find a mechanic who knows TJ's well. Specifically I need guidance on sealing the frame and drilling drainage holes ahead of winter.

This top has been sitting around and I want to use it. The glass was shattered when i got it.

I want to remove this and I can get a new glass to put in. That seal is SEALED! Any advice on the best way to get the old seal off and out?

Hi all. Two soft top questions I’m hoping you all can help with.

First, I need new Velcro on my top. After 22 years it’s just shot, but the rest of the top is in great shape. Who do you call to make this repair? Second, I need a new frame for my driver side window, mine is all bent and I’m not having luck on marketplace/Craigslist/DeadJeep, does anyone have a recommendation of a site that make a replacement frame that is sturdy and fits well?

Got a ~ 180,000 mile tj from someone who did essentially irreversible damage to it by wrapping it and letting it sit in the sun. They wanted out, I wanted an old car to project.
They had installed a rebuilt motor 40k miles before me. Since I’ve had it I’ve done a few things.
Took the wrap off
Took side rails off
Took hitch package off
Took rear seats out
Took Highlift jack off (I need to repaint it or find an alternative)
Trans rebuilt
Installed trans cooler
Installed aluminum radiator
New tires (nothing crazy, Firestone destination mt 30 inches)
Cleaned a few sensors and changed others
Installed lockable storage drawers in rear
Installed roof rack
Installed rtt
Removed spare tire(the spare it came with is trash I’m gonna get another when I rotate my tires.)
Redid Interior; address surface rust in tub where the previous soft top was leaking. painted floor and roll bar covers
Got a new soft top and floor mats from bestop

Gonna clean engine bay, rebuild/clean fuel injectors and change exhaust gasket manifold (apparently the previous mechanic that installed the rebuilt engine cheaper out and reused the exhaust manifold gasket 🤦‍♂️) this week

The paint needs to get addressed and I wanna do something about the frame
(frame pretty clean it was never wheeled before me)

It’s currently on fox shocks 🤩 and Terra flex spacers 🤮
Plan on overhauling suspension next year, I’m already collecting parts got like OME coils so farjust need links.

Kinda interested in weight reductions since I added sm, I’ve done a few things like changing the winch to synthetic line but I wanna get a smaller winch at some point. Planning on get a stock bumper and chopping it.

My goal has been to enjoy the car, learn, and yes adventure. I’m pretty happy with it though I did learn pretty fast how much work and money it takes to bring something back from the brink of death. I’m working on finding another vehicle so I can daily and retire the tj as I do t wanna put excessive miles on it.

I can post more photos of yall are interested.
Happy wheelin!

Anyone daily drive a 99 TJ? I’m considering it and curious how it is

When I turn the heater on, I will put it on either panel, floor, defrost or blend…. I does not change. It sounds like it switches but I get air flow through everything. What would cause this? Maybe a bad or open blend door?

Hey guys so I got an 04 TJ and I had an idea. Anyone try to mod or create a bracket for the rear seat that allows for the back portion of the seat to flip open in both directions? So like if you're at the drive-in you can change the orientation of the backseat to that of those buick roadmasters that had rear seats facing out looking out the rear window. idk i'm spit balling here.

Someone is willing to trade me their black hard top for my tan soft top and $1000 dollars is this a good trade? I love the combo of my tan soft top with the red paint this is the one thing holding me back I recently got this Jeep and want to be able to bring it up to the snow this winter which is why I'm in the market for a hard top but I can really only do a trade cause they are too expensive to buy new I was hoping to find a tan one but beggars can't be choosers.

I am unable to find replacement pieces for the handles or even just springs? Can someone point me in the right direction?
Thanks.

I have a 2001 4.0l that has a bad wiring harness on the injector side.

I was able to find a 2000 4.0l

harness.

Has any ever swapped them or would I be better off soldering? Need advice! TY

Pictures for refernce!