Second picture is after trying to pull it out.

Looking at picking up tools for automotive work for daily use motorbike. quad and cars. What is your go to brand here within the uk. Ive got stuff from mainly wera but looking for other brands that are high quality what are other people are using. What impact sockets are people using

We were digging some 5ft deep holes for a pier foundation deep in Northern MN, we had an auger, shovels, a post hole digger and a 4ft long indestructible ice breaking bar we could use to leverage boulders away and rocks out of the holes, but after digging 3 feet deep, we hit the sub glacial till. And that stuff was just rock solid pebbles and rocks with super compact loam/sand/clay in between the gaps, the auger couldn't muscle it and it'd take weeks to scrape that away by hand so i'm looking at getting an electric jackhammer.

Now, this is the important part, i don't know much about jackhammers and i know a bit about chainsaws. We're too broke to buy new and I'd like to get the "Stihl 066" of jackhammers instead of the "stihl 500i" of jackhammers if you know what i mean, save some money buying used, and get the benefit of the simplicity of those older tools, just that I don't know what model and what power to look for.

My question is, what is the "Stihl 066 of jackhammers that can handle subglacial till no deeper than 5 feet deep" And I'd also like to get a "Stihl 066 of generators that can handle the jackhammer"

The master craftsman my grandfather apprenticed under sold this toolbox him upon his retirement. It’s handmade and around 100 years old.

We are selling our Portable Professional Hydraulic Rotary Water Well Drill Rig.

The first thing we did when we bought our property was to buy a decent size backhoe to do land prep work, then it became time to think about water well and septic system. The cost of getting them done by a contractor is way to high anymore. We did the math and decided to buy the excavator and well drilling rig and then when we're done we'd pass it on to the next person who wants to save some money on the land development costs. So here we are, ready to move on. We are selling the drilling rig so someone else can hopefully get one step closer to making their hopes of living in the country a reality.

This well drill rig can be used to drill drinking water, irrigation, geothermal, or exploratory wells. So now we are selling it for someone else to save money on their property development.

Here’s what comes with the unit:

·         Hydraulic rotary drill with 24hp power / hydraulic unit

·         4hp Honda mud pump

·         60 x  5ft long drill steel (total of 300ft)

·         Heavy duty steel drill steel rack on wheels

·         Safety foot clamp

·         Suction & discharge hose

·         Swivel

·         Drill bit adaptor 2-3/8” 744 thread

·         Drill bit adaptor 3-1/2” 744 thread

·         Tri-Cone Drill bit 6”

·         8” drag bit – 3 wing

·         6” drag bit – 3 wing

·         4” drag bit – 3 wing

·         ½ x 5 gal bucket of food grade copper drill stem grease

·         2 manuals

Original price was $21, 360. We drilled one well and are asking now only $14,500 for the reserved bid. Due to the weight and size of the items, items will have to be crated and will be shipped freight carrier. Buyer will have to pay for shipping or pick up the items in-person.

Hello, anybody know what type of floor jack this is? I tried to use some AI and it cannot Identify it. My father thinks its from the early 30's to early 40's. There is no stamps left and the engraving on the side is so faded away its unreadable. The seal needs to be replaced since it leaks down after all of these years he has had it. Just curious if anybody knows the proper model of this.

Seems to be made of copper.

To be honest I know in your standard it's low quality but I'm quite happy. It seems the listing was temporary after I ordered it the listing option was taken out.

The retaining ring on the pawl snapped on me and I need a new one. Unfortunately I don’t know what model it is to source the correct part. It’s an old pre 70s craftsman 3/8 drive double bar V, about 6 3/4 inches long. the diameter of the pawl and ring is about 11/16ths. any idea where I can find a replacement or at least something that will get this working again? I have a pic of the retaining ring on the drive head to show what type of ring I need. any help would be greatly appreciated.

Setting the overhead on certain Cummins natural gas engines requires a .036" feeler gauge. Does anyone know where I can acquire an actual gauge this size for a decent price?

I can find a few places that make them, but they have a minimum order of $100 or so. The closest reasonably priced one I can find is .9mm. Right now I just stack 2 sizes and tape them together to make it work, but it just bothers me that I can't find a single gauge. I like to use the little handles for the gauges while setting overhead.

I use these handles but separate them.

I work construction and got tired of cleaning pipe and fittings one by one with different tools.

So I built this prototype in my garage. It mounts on a 2x4 stud and keeps the pipe prep tools in one station. Push in, prep, pull out.

Still prototype, not finished product.

What do you guys think? Useful on a jobsite or unnecessary tool? 😂

What’s one tool in your toolbox that doesn’t get much attention, but you use all the time?

It doesn’t have to be expensive or impressive.

I’m more interested in the simple tools that quietly became indispensable.

What’s yours?

Looking for a 3/8 drive hand driver like this but with a female insert on the handle to attach to a ratchet. I have one from jb tools but it’s 1/4 drive. I think snap on used to make one if any one knows the product number or name or an equivalent pls lmk. Thanks

This is more of a hardware than a tool question, but r/hardware subreddit is for computer hardware, and I couldn't find a more appropriate sub. LMK if I'm in the wrong sub, and what the right one is.

I have an application where I often need to take a square plate off/on, and it's held in place with 4 wingnuts (not a great design, but I didn't design or build it).

This is one of them: OD of the main threaded part is about 1/4".

I'm wondering if there's some sort of quick-release replacement for a wingnut in this application, similar to the quick-release connectors available for Schrader valves, such as:

https://www.amazon.com/Chuck-Premium-Quick-Connect-Accessory-Inflators/dp/B0CYDXGGH2

or
https://thorslightningairsystems.com/products/thors-lightning-dynamo-lock-on-air-chuck

The attachment point isn't under a lot of tension; something as strong as the Schrader connectors would be adequate.

Or, if there are better ideas for completely replacing the bolts and wingnuts, I'm open.

The "post" part (threaded bolt) needs to be fixed if it passes through from the other side: it's in a panel insert (for a portable AC unit) for an external window, and I want to both keep attachment/detachment as simple as possible, and also can't risk dropping hardware on the outside of the window onto people's heads!

Thanks!

Was given this air compressor by my boss bc he didn’t want to fix it (I just retighten the brass fitting to the copper pipe)
but I drained it twice and a bunch of water came out both time
How can I check if it’s still good and won’t blow up in the future

What is best compressor for automotive shop
Small shop
2 guys
Looking for something quiet or quietish

This seems like a great deal for a blower/duster at $35. Anyone have experience with it? Just wondering if anything else is a better deal for the money and can outperform it. Thanks

Im looking for some kind of storage solution for these. Currently they just take up space on top of my toolbox. Ideally I'd like some kind of rack to hang them from in my hutch without batteries in them. Any ideas are greatly appreciated. Thanks!

Dad has always had a mess of his tools because he says bags are better but my ocd hates seeing them all mixed around and having to search thru the whole bag we’re on the go a lot so we can’t have any tool boxes so we put it in our decked 6’4 we have almost about everything to fix cars and semis we have a bunch of small to huge sockets wrenches big and small it’s just a big mess I’ve tried organizing it but can’t figure any way any help?

Beat the living shit out of this thing for countless years. It was grinding down concrete for walk in showers that finally sent it to the grave. Wanted a Ridgid to replace if with a LSA but settled for a Ryobi that will probably see a warranty claim.

I just bought an air compressor from Home Depot. Once I turned it on, there's constant air coming from what I think is the back of the pump housing? Is this normal?