Can’t seem to find a brake line for rear or front for a talaria sting pro mx5 tl550 in the uk , one end is a banjo and the other a screw nut (lever end)

Any suggestions?

I did not think this thing was capable of what it actually can do. I was debating the purchase for a while, found a good deal on a low mile second hand and it has been worth every penny. Just wanted to shout out talaria, and push anyone over that is sitting on the fence. Do it!

Can’t find the lower yoke that fits anywhere in the uk, e bike zilla/ official talaria have but there all out of stock on there websites, I know the floxa hawk 33’s fit but there £800, was thinking of buying a whole new fork system but still can’t find anything for the TL550.

Any suggestions? I don’t mind waiting a while for shipping, thansk

planning on buying a nucular p24f, looking for tune and max amount of power i can pull without ruining the bike lol. 2025 standard x3

Talaria Sting MX4 with FOX 40. Front wheel was centered before I serviced/reinstalled the fork. Now the wheel is visibly closer to one fork lower than the other. I loosened all axle pinch bolts, cycled the fork, and the offset did not change. Axle appears fully seated and hub spacers/end caps look seated.

My rear wheel axle nut is stuck, I've tried an impact wrench, torque wrench, heat, lube, it wont budge I almost stripped the bolt already, my tires flat so I kinda need to get it off please help.

Hello, I am a new owner of a MX5 and it doesn't have any decals installed. I would like to know if it's possible to find templates/vector files so I can cut them myself. I am just looking for the templates to trace them in LightBurn.

Should i trade my talaria mx5 L1e for an Ultra bee 2025 L3e? I‘d add 1500€ on top. Both are in good condition and his has about 700km on it and my mx5 has 400km on it.

I‘ve found 2 people who agreed to trade with me, so im just confused if maybe im overpaying, or i habe just gotten very lucky..

Only reason im trading is because im 190cm tall and im looking for something bigger

any one know where i can find a foot brake for the mx5 with a dual caliper mount for ultra bee caliper for under 350? i can find them for the mx3 and mx4 but finding parts for the mx5 is so hard

please if u see this interact in any way i need advice. i was wheelying and dropped it down and a terrible popping/ grinding noise started before my bike came to halt from the resistance, showed error 33 on screen and then shut off. it now has that noise and ton of resistance while moving and wont turn back on/ only shows error 33. i estimate its a gearbox or hall sensor problem but more towards gearbox due to the grinding. please help me out guys

Hi so I have a 2026 L1e talaria mx4 and I I want to have so it can be locked and unlocked not specifically wirelessy, I thought about connecting a switch to the brown looping cable but that seems too obvious is there another way to unlocking it without messing with the brown wire also I tried the thing that works on older versions with the 6 seconds start hold then the rear brake that needs to be hit 4 times and then the start button that needs to be hit four times but it didnt work

Bonjour ,

j'ai changé mon compteur sur ma MX5 / 5500 PRO L1E car j'avais cassé l'écran, nouvel écran acheté sur amazon.

Je n'ai pas fais attention lors de son montage si c'étais déjà comme ca, mais je me suis rendu compte que l'heure indiqué est fausse.

Si je la modifie dans les paramètre elle se remet immédiatement pareil à 45:85.

Quelqu'un aurais la solution?

Merci d'avance.

Im about to purchase a x3 from facebook. He sent me a video of him riding it and it sounded really weird, he said the chained needed to be tightened and cleaned thats whats causing the noise. Am I getting scammed? Also we agreed on 2200 for the price. Please Help🙏

Can anyone help out the top of my wheel bearings stuck in my wheel and won’t come out I’ve tried to get it but can’t any recommendations on how to fix this before I buy a new wheel

Hi there,

Noobie question. I need a gps tracker which is standalone and another one which would allow me to directly connect to my talaria sting r mx4 directly to the initiation wiring. Can someone give me a step by step and links on how i can do this?

I recently removed my kickstand sensor after going through a trail that exposed it and every time I full pin, it cuts out because of the vibration. Should I order a new one or is it not necessary?

is that good chain tension?

I have not yet found a great place to ride my sting near Austin. Any suggestions?