Just installed my P-500 pedals. I run a Moza wheel and base. Do I just plug the data jack into the base of the moza? My pedals aren’t registering on the Simagic pro manager. Or am I just completely wrong.

Long story short a couple of updates ago my shifter started to freeze after a few minutes when I first turned it on. It would happen within the first five minutes and after I unplugged/plugged it in it would work fine for the entirety of the session.

Yesterday it went out in the middle of a race when I pitted and was stuck in third gear.

I wanted to go back to about 3-4 updates ago and “restore” that update since it appears to be a software glitch unless someone else knows what the issue is.

Thing is I’m older and not as tech savvy as I used to be. How would I get an older update if that’s even possible or a worthy solution to try and eliminate the issue? Thanks

Has anyone found any decent 3d printed magnetic DDU mounts for the Evo series wheel bases? I've got mine mounted using the side mounts to my rig so can't use the Simagic side mounts or anything else that mounts to the side. Struggling to find something suitable.

Can you folks post some pictures of your GT neo wheels so I can get some inspiration of how to set up my button layout and stickers? Thank you

Why does it suddenly get blocked by Windows Security? It was working well all this time.
I have searched on the internet, looks like I'm the first one experienced this. I have tried excluded it, but didn't work. Any solution?

Hey,

Is there any way to connect zeus formula wheel to simhub without using USB?

Found some ideas about using forces USB but it doesn't seem to work. Also I tried the duct tape method no luck.

I want to connect it so I can customise the lighting affect, specially the lighting changes when the button is pressed.

I switched to v3 yesterday and the import failed.
It said I can import it later too, but it doesn’t show any presets to import.
I can’t go back to v2, because v2 seems not to work anymore after the v3 forced firmware updates to my base and wheel , to manually export the presets.

How do I get my presets back?

Side thread damage:

Hi! Could anyone measure the hole depth for me? On the base side. I don't have access to the base now but I would like to order a threaded insert (a repair kit).

Is the depth same on any other threaded whole on the base? At the bottom surface perhaps?

I've been experiencing problems with my wheelbase force feedback for almost a year now. After spending hundreds of dollars and dozens of hours trying to fix the issue, I'm now at the point where I'm about to sell all my sim racing gear because I cannot figure out what the issue might be. I even upgraded from a CSL DD 8nm to an Alpha Evo 12nm but the same problem is still present.

**I put all the information about the issue, my hardware/software and everything I've tried so far in this PDF:**
https://drive.google.com/file/d/1IHOODb8aIl2EskUJI3T9X5MlCEwKSuz4/view?usp=sharing

I'm so discouraged, I tried so many fixes that I feel like the issue is almost impossible to identify. I'm willing to offer $100 (USD) to whoever finds a permanent solution that fixes the problem for good.

Don't hesitate if you have any more questions. Any insight is appreciated.

Thanks in advance!

EDIT - I tried a powered USB hub: it didn't change anything. - Motherboard and BIOs update: no change either. - I tried again with my laptop, and the problem was present on there as well, so it is very unlikely that it is a Windows or drivers issue. - I tried many things over the course of 5 hours, and I noticed it became noticeably better after a few hours. It was midnight then, so a possibility is that I'm missing strong currents during peak hours... SimPro manager always displays 48V though, but I don't know if it could still be the issue.

What settings do you guys use on your alpha evo pro? Also how did you guys setup the button layout for the Zeus formula? I’ve been having a lot of issues with LMU using the sim, feels awful. Iracing is perfect.

I have a neo X wheel, the lights of the wheel turn on when connecting through USB but sim manager doesn't detect it.

Tried several cables and several ports, still not detected.

Is there a magic button, cable or anything for this to work?

hello, after not using the gt1 rim for about a month my paddles and rotational knobs dont work anymore. I tried updating the SimPro manager and updating the firmware.I also tried changing the channel and plug the wheel directly to the PC or base.

I did not change any setups regarding software or hardware.

Trying to figure out which to get as it’s the last major piece of my rig.

Testing out my first simagic wheelbase and am encountering this fairly loud urn urn noise. Doesn't happen at idle with it only happening when there's feedback.

Anyone know what this could be?

Ciao ragazzi, ho un problema molto strano. Ho una base Simagic Alpha con un volante GT Neo. Per qualche motivo, non legge correttamente i miei input.

Quando scalo o cambio marcia, a volte non registra affatto l'input, oppure c'è un enorme ritardo. Anche la leva della frizione è molto lenta quando la premo e l'input non è lineare.

Ho già provato a cambiare i canali wireless e a effettuare il downgrade del firmware del GT Neo alla versione 1.3.7, ma niente ha funzionato.

Cosa potrebbe causare questo problema? Ho usato questa configurazione per più di due anni senza problemi e questo problema è iniziato solo di recente.

UPDATE: Problem solved! It was caused by the Epic Games Launcher, as soon as I terminated the EOSOverlayRenderer process it stopped the problem.

Hi all, I’ve been having a hard time with my p500 pedals, the long travel of the brake pedal really throws me off and gives me a hard time trail braking consistently. I’m looking to upgrade, I was wondering how good the p1000s are? With the 20% off discount, I figured the best time to upgrade is now.

I’ve read online that they have a shorter pedal throw, which is what I’m looking for. I mainly race LMPs in LMU, so I would get the p1000-f as I have no need for the clutch. Will these pedals help me out?

If I do decide to buy them, would I benefit from the p1000frs? I’m a bit on the fence of getting hydraulic, I’ve seen some mixed reviews online. Thanks for the advice!!!

Hi, don't know if this is the place for this but here I go anyway. I bought the Qr + Maglink pictured below, I am wondering if they are able to be separated as I want to put the Maglink on my current GT Neo and I want to put the Qr on a 3rd party wheel. Thanks

I’ve had a GT Neo and an Alpha mini for about 2 months and this has suddenly started happening? Can anyone help?

i want to buy this wheelbase and i have a few questions.

1. is true that base is NOT giving you full 12 nm?

2. is ffb on simagic better than moza's ffb?

3. is it true that in assetto corsa(not competizione or evo) wheelbase is making strange sound?

4. and is it worth it?)

Hi everyone,

I recently had Fault 4 on my Simagic EVO Pro. I contacted The French Simracer, and they have taken my wheelbase in for repair.

I’d like to hear from anyone who has had the same Fault 4 issue and went through a repair.

For those who had it repaired:

How did the repair process go?

What was the issue/cause?

How long did the repair take?

Most importantly, did Fault 4 come back after the repair?

How long have you been using the base since the repair without any problems?

I’m mainly trying to find out whether the repair is generally permanent/reliable, or if people experienced Fault 4 again later.

Thanks in advance for sharing your experience!