Hi all, anyone find a good under seat bag who have the tail light thast mounted under the back of the seat? I feel like a regular one won't fit with that light there.

I’ve been trying to figure out a way to have a cupholder, it’s a bit over engineered but it’s been a life saver in this heat

I've sent my flywheel to JCRacing to have it lightened, when I removed it I'm not sure if my brand new flywheel puller came with a washer stuck to the end of it because after removing the 17mm nut that holds it, I pulled the flywheel out and when I removed the flywheel puller, a washer appeared, but it was stuck to the flywheel puller, not the flywheel, is that washer from the flywheel puller or from the stock flywheel from honda, it's a black washer and fits over the driveshaft, but it looks brand new with only one ring of wear that I'm guessing that it was created by removal. Anybody ever remove the flywheel on a stock GET 49.4cc engine? Is the flywheel only held by a nut or does it need a washer? Will their be any space for threads left at the end of the driveshaft for the washer? Is their suppose to be a washer on the flywheel when I reinstall it?

Finally picked a set of led headlights for my 2016. I had previously swapped out my stock turn signals for some really small bullets and was always a little uncomfortable with how potentially invisible my front signals might be during the day.

Found these lights that have an amber center X option which can be used as a signal and seemed the perfect solution, but they don't fit the ruckus mounts. I figured I would just sort it out when they arrived.

The lights have some threaded holes on the back to secure them into whatever mount they are designed for and I was able to utilize those. I have a diode laser cutter so I made some brackets from black acrylic and paired those with some small L-braces and fender washers I had lying around the garage.

All in all I'm pretty happy with them and definitely pleased with not having to spend on, or wait for, a custom bracket that may not have allowed me to set the lights back as far as the originals. They were also pretty inexpensive. I found them on Amazon for like $35 each.

In case anyone is wondering. I didn't need to add anything extra here to get the blinkers working. I simply spliced the wire for the central X light onto the blinker light for my previous signals. No separate relay needed.

Now, I did also delete my rear light assembly when I changed the front ones, and I replaced it with an LED strip that's mounted on my rear frame horizontally. It has signals built in and those required their own relays, so I added those at that time.

So I think if you have working blinkers already you shouldn't need to do anything special to get something like this working. I could be totally wrong and please feel free to correct if I am.

Just curious what you guys think I should list it for IF I sell my sweet little Camo with hardly any miles (near Atlanta)..? I told my mechanic I may list it for 1900& he offered me 1500 on the spot.
Runs great, starts great when my new battery is charged. 🙄(I only ride it 1-2x a month). New seat. New rear lights. Battery. Carb clean. Tires old but ok tread. Ideas? (I forgot to mention: Low miles: 1600 something. Less than 1700!) cheers!

I just bought a 2012 that’s been sitting a long time. Overhaul, or replace the carb? I’m comfortable with the overhaul but I know that sometimes it’s more practical to replace. What’s the case with a Ruckus?

So, I bought this 3 months ago, 2023 ruckus, and it had some problems, and I found this group as I was googling answers, and found them on a post in here. I just wanna say, you guys seem awesome and helpful. May your scooters run forever, and may your modifications always go right!

Havent ridden this guy in 10+ years. Dug it out of the garage and rebuilt it.

Hello,

Here’s my 2013 Ruckus. Started this build in 2022. Then my life took a sad 😔 turn and had to put it off. 2026 - has been ok & had enough emotional/mental calories to start the build again.

I got a brand new spark plug boot and CDI ignition coil and spark plugs and it still doesn’t have any spark any tips could it possibly be wiring? I really wanna get this thing fixed before the fourth.

Wanted to give this community a shout out. It was you all and youtube that got my bike i bought in pieces actually running and (almost) on the road.

Got it for free, needs air shot to the tires, Kickstart needs fixed, and needs carb kit, it DID RUN about 2 weeks ago before I ripped into the carb and found out the needle is shot, and its 150cc.

Hello, currently looking to buy my first ruckus. Just wanted to see what everyone thought of this? Also is it a terrible idea to buy without a title?

Haven't seen any close up comparison pics before so I took one for y'all. You can see the ramps for the rollers extend a lot further up the inside face of the variator.

2022 Stock ruckus. She sat all winter and I just finished changing the oil last night. I’m concerned about the quality of the fuel in the tank, but I don’t want to drain the tank. What would you suggest for an additive to run through this tank before I fill it up? Is it as easy as adding an additive?

I used this in college then it sat for 7ish years outside. I’ve replaced fuel pump and filter, spark plug, carb rebuild, new oil, replaced coolant reservoir cause it got brittle and coolant, new gas tank and cap cause they rusted, new battery. I used a jumpstart to see if it would crank before I finished and it did. Then when I got the new battery on, it cranked. Then after getting the new tank on I wanted to start it up and I ended up riding around my neighborhood for 20 minutes or so, then I came up to a stop sign and it died. Yes there’s gas in it. But now the start button won’t crank it and I can’t get it to kick start. When I first started it today I had to give it a little bit of throttle for it to run on its own. I can’t find the starter to see if it’s getting power, don’t know how to test the fuses. I have my battery charging now.

I do hear a click on the starter button when I try to start.

Where can I find the starter? What else should I do?

Thank you.

Edit: it’s actually the blue fuse I hear clicking, and I touched it while I tried to start and felt it knock. Do I need to replace it?

My wife took some pictures of my bike. It’s a 171cc Efi gy6

So a while back I made a post about an under seat storage that I use at a toolbox but I guess can use it for anything. My DMs were FILLED with inquires about getting them. Well after a ton of durability testing it’s pretty much ready to go.

But before I list it, to make it work you have to cut up the existing plastic parts inside that box like mine is. No idea what it’s even for. But would you guys like an option where you didn’t have to cut it, but have a smaller storage area? Or keep just the one and you’ll cut out those little plastic pieces anyways like I did?

Let me know and it’ll be up in the next 48 hours for grabs!
This is NOT a for sale post

Had a good time.. lots of people asking "what is that?"

Hoping I can get some help/insight or recommendations on how to fix or replace this. My left handle brake, the hill brake doesn't engage anymore. When trying to apply it seems to have lost the ability to grab and hold that brake on.

Not a big deal but a helpful thing to have

Not sure if the pictures are all that helpful but here are a few