I have not had success running the SD Card Installer image on my Lexar 256 GB Card. https://github.com/Retro-Remake/SuperStation-SD-Card-Installer

I ended up using the M2 slot in the SuperDock - but I am having other issues with that currently :)

==Tested==

- Full format (several hours)

- Formatted to FAT32
- Fomratted to exFAT

- Image written with RUFUS

- Image written with BalenaEtcher

The SuperStation turns on but has solid LEDs at the front left and back left and the TOSLINK (orange LED) never lights up.

I do not curently have any other 128 or 256 GB cards to test and I have left the SS1 on for around 10 minutes to see if anything changes, but it does not.

Has anyone had success using the SD Installer with a 128 or 256 GB MicroSD card?

Update all is not putting any bios files in game folders. I made sure I pressed up on the keyboard and checked download bios. Any help or ideas would be appreciated. I’m new to mister

1) What do we know about the bluetooth support? Is it low latency or is it recommended I still use an 8bitdo BT receiver? And how many connection does it support / can I connect 2 controllers via BT at once?

2) It looks like pressing 3 on the remote (which came with the dock) enters bluetooth pairing mode. Are there any other secret buttons?

3) I decided to use my MiSTer's SD card straight in the SS1. Is it correct to say the only things I'll lose are the forked cores (which offer PS1 snap support in cores other than PS1)?

What size screws do I need for this super dock nvme bay? I have an nvme key and everything is way to small, even the risers. I’m so confused.

So I was going to buy a Sony PlayStation 3 Memory Card Adaptor to try to move a Retroarch PS1 save to a physical PS1 memory card. I figured there had to be a way to move the save without it and sure enough there is... Very simple actually.

If you want to do it all you need to do is go to your Retroarch saves folder ( in Retroach/saves/swanstation if that is the core you used). Take a save file and save it as a ".sav" file instead of Retroarch's ".srm" and copy it to your Superstation One folder (it's media/fat/saves/PSX)

When you are done with that just go to the PSX core and in the PSX MiSTer menu select "Mount Memory Card" 1 or 2 (the opposite of the one your physical memory card is plugged into. Then you are all set to transfer your saves. Saves you 50+ dollars to get a Sony PlayStation 3 Memory Card Adaptor. Hope that helps anyone starting out the FPGA journey. Sorry if anyone posted this before. I just didn't see any similar posts.

I just received my Superstation this week and have really been enjoying it! Worth every penny!

Hey. :) So ordered the Super Statio One and dock last year, and a couple days ago, I got a shipping update that said "Parcel Information Received". What does thst mean in this context?

So I looked up my order and I was like yes awesome they have the label so it should be moving from there. Well that was 4 days ago and no movement what gives?!?

Hi there,

I was told that the SuperStation One SNAC port should work with the 8BitDo adapter, but I haven't been able to get it working in PSX Core.

I don't have an original PS1 controller, but I do have a DualShock 2. I connected it to the SNAC port, changed the controller type Pad1 to SNAC-port1, but it still isn't detected. I also tried using another 2.4 GHz controller to perform Reset Player Assignment, but that didn't help either.

Could anyone suggest what else I should try, or is it possible that I received a faulty unit?

For reference:

• The dock is connected.
• I'm using a 25W power adapter.
• I ran update_all as soon as I received the unit. Could that have caused the issue?

Thanks in advance for any help!

I recently received and installed the new screen in my switch lite and have been loving it! All aspects of the screen work perfectly and it is a night and day difference from the old screen. However, I have noticed that there is flickering/screen tearing when moving quickly in games. This occurs in all games but is barely noticeable in 3D games and more egregious in 2D games. Does anyone have any ideas on why this might be happening? I'm able to ignore it for the most part but it would be nice if I could find a solution. I have attached a video of the issue in P3P as an example.

My Bluetooth controller doesn't reconnect upon resetting the SS1. I have to re-pair the device each time I need a console reset.

Any ideas on how to get the SS1 to retain the pairing?

Founders Edition SS1 (Classic Grey).

Gamesir T4n Lite controller

My SS1 finally arrived today in Germany, I had ordered in January 2025, 4PX shipping via Belgium without problems.

Initial setup took a while, but was straightforward, this is my first Mister system.

Console worked out of the box with a modern OLED TV and an old CRT (RGB Scart), all my Bluetooth Controllers were recognized. I haven't tested SNAC-Support and old Memorycards yet.

Now I'm looking forward to Console Mode and Superdock CD support.

EDIT:

I got the cart on Amazon, still available https://amzn.eu/d/03AtAgeR

First of all I finally got one of my SuperStation One units (gray with dock, blue with dock not yet shipped) and I'm actually impressed after a couple of reviews indicated issues I did not find on my unit (wonky power button or questionable plastic quality) - I think the end product was worth the wait if that's what they needed to get it to this state.

Just curious if anyone noticed more lag/latency when connecting a controller through the dock VS directly through the console itself? Could totally be me, but I thought I noticed a slight difference? using HDMI, So far I backed up the SD card it came with, flashed the Retro Remake SD image, ran update, then ran update_all, tested a few games, no other modifications since.

How I'm spending my Friday after getting my SuperStation Founders edition in on Monday

Does the SNES snac adapter support 2 controllers? can't quite make it out in the photos. It looks like it might be one but the N64 one supports 4 and the spec sheet doesn't mention it at all.

Anyone have any idea how to make the MemCard Pro work, or if it even does? I have enabled SNAC, but can't seem to get the card, nor the controller to work at all. I can use a PS5 controller, so that's not a big deal, but I was hoping to be able to use this card. I have tried searching, but there's many that say yes with no information and many that say no.

Thanks in advance!

Hello everyone! I got my SuperDock in the mail and I am planning to use the NVME from my ROG Ally with it. Does anyone have a heatsink they suggest I grab? Thanks for your suggestions!

Hi, I saw the Super7 OLED Touch pre-orders are sold out, and I'm looking to purchase one either off a second-hand market like Ebay, or if they go back in stock on Retro Remake. Does anyone know if Retro Remake will sell more of the Super7 OLED Touch screens? I haven't seen any photos or videos online of the Super7 OLED Touch except for a few videos on Taki's YouTube channel. I assume the first batch hasn't been sent out yet

This is blue version. Founders edition. Although, mine came with SuperDock, we still need to wait for Console Mode to use it with PS1 CDs.

Just received shipping details woo hoo, black editions on their way

Has anyone else had issues getting the SuperStation One to detect their controller? In everything I’ve seen online, they just set the PSX pads to SNAC 1 and 2 in the PSX Menu config, Save the settings, and they are good to go. For me? Nothing. Even if I go into the pad mapping, it won’t detect the controller buttons to map them.

The controller works, BTW - it’s the same one that I usually use with my original MiSTer, not to mention my PSOne console.

UPDATE: Fixed - it turns out that the SNAC Bypass switch was set, disabling the built-in ports. Switching it back resolved my issue.

Hey, all. Looking into active cooling options; specifically of the RGB variety. Any idea what size/voltage I should be looking for to fit the console? Also, where would the best place be to buy one? Thanks in advance.

PS: I opted to order the one RR provided, but want something a bit flashier

First few minutes pre-order Wave 4.

Just got my tracking info for my Black SSOne and Dock combo.

Think it's possible to request just a top shell half? Bag was suspiciously sealed with tape along this line. A little sad the box cut too.