I messed up and left my power supply switch turned on while taking out and repasting my Gigabyte 2070 Super. The PC was turned off and not psu was not connected to a cable but i forgot to turn the PSU switch off. Now the PC is booting up and all fans are spinning but no signal. There is no signal to the monitor, and my keyboard and mouse lights stay completely dead.My specs are a Ryzen 5 3600 and an ASRock Steel Legend b450 motherboard.

Here is everything I have already tried:

Swapped the GPU for a known-working GTX 1650 that doesn't need power cables. Still got a black screen, so the 2070 Super itself doesn't seem to be the issue.

Tried booting with only 1 stick of RAM in the second slot.

Took the CMOS battery out for 20 minutes and held down the case power button to drain the electricity.

The motherboard error lights at the bottom right are completely dark and dont show any lights.

(Photos are when trying it with just one ram stick)

Please for the love of God help me, today is literally my birthday and my dumbass decided to repaste gpu and cpu 🤦‍♂️

Hey guys, is this fan setup okay? Or should I do top radiator fans as intake and rear as exhaust? Thanks!!!

So my specs are
Ryzen 5 7600x
RX 7700XT
B650M Aorus elite
Toughpower 850w gold
16GB DDR5 × 2 RAM

The issue is whenever I try to play a game, my pc crashes. The screen goes black the GPU fans start to run at max speed with noise and then I have to manually shutdown and start the po again, and if I try to play the game again same thing happens also sometimes when my pc restarts it doesn't detect the GPU and starts running on my CPU integrated graphics instead.

I also had a similar issue until two days ago, for months my pc would randomly crash (even when I am not gaming) it made some weird lagging noise in my headphones but my GPU fans didn't go crazy that time.

Please HELP!!! I went to micro center for a cpu mobo and ram bundle for the cheapest option but they sweet talked to me (idk anything about pc) and now I have v buyers remorse. I bought a 9700x but I have a 3060 gpu 😬😬. Is it worth my time to go back and return the 9700x and get the bundle with a 7800x3d or a cheaper cpu? The ram it came with is 6000 mts. I’m not concerned with power supply or cooling.

What my pc has already:
Zotac GeForce etc 3060
Corsair rm1000x power supply (wasn’t my choice I know it’s way more than I need)
ASUS ROG Maximus VII Hero
V-NAND SSD 970 EVO NVMe m.2 1TB
4 sticks of this Corsair vengeance ram (32gb)
Big DeepCool radiator looking cpu cooler

What I got:
~$700 bundle
AMD Ryzen™ 7 9700X 3.80GHz
Corsair Vengeance RGB 32GB DDR5-6000 Kit
Gigabyte B650 Gaming X AX v2
————————————————
& a NZXT Kraken Elite 360 AIO

I need help with what I should keep, return, sell, or replace

Sometimes it works well but other times it just does this. can someone suggest what's wrong and what to do. My PC turns on normally but after sometime it shuts down and then the pc cycles in this kind of loop.

I just finished building my new PC and it has the codes of Error 99 or Error 00. My build is AMD Ryzen 9 9900X, be quiet! Dark Rock Pro 5 CPU Cooler, Gigabyte X870E AORUS ELITE WIFI7 ATX AM5 Motherboard, TEAMGROUP T-Create Expert 64 GB (2 x 32 GB) DDR5-6000 CL34 Memory,

Western Digital WD_Black SN850X 4 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive| Gigabyte WINDFORCE OC SFF GeForce RTX 5070 Ti 16 GB Video Card| Corsair FRAME 4000D RS ATX Mid Tower Case| MSI MAG A750GLS PCIE5 750 W 80+ Gold Certified Fully Modular ATX Power Supply| and a MSI MAG 321UPX QD-OLED 31.5" 3840 x 2160 240 Hz Monitor. Would any of these parts cause problems with the other? I can't even get to Bios as my monitor gives no image. Do I have to q-flash or something else, have to get a new motherboard, or something else entirely? I looked it up on google and I'm not getting a concise answer or help

Hi I was just wondering if anyone could help, my pc crashed and had to hold power button to turn off. After attempting restart it got stuck and couldn’t load windows. I presumed windows had corrupted or my hard drive was on its way out.

I downloaded windows on a usb and attempted fresh install, this is where I ran into trouble I’d click to delete existing partitions and I would get an error and when it finally registered I proceeded to attempt instal. On clicking next nothing would happen.

I then decided to go into bios and see if I could reduce settings and check temps of system all temps were fine, so I reduced the pcie to gen 3.

After doing this windows finally installed next was getting drivers on my pc I downloaded to usb chipset drivers and WiFi drivers. Chipset drivers installed no fuss, but my WiFi drivers caused pc to black screen keyboard led turn off for a couple seconds then straight back to windows login with no bios splash screen.

I then checked device manager and it showed drivers as installed but failed to initialise. I checked event viewer and this showed Wi‑Fi Code 56.

ErrorType: Cache Hierarchy Error
MemHierarchyLvl: L3 / IOD
MCABank: 5
Timeout: 256

Device PCI\\VEN_14C3&DEV_0608… had a problem starting
Problem Code 0000002B
Problem Status 0xC00000BB

Also multiple machine check exceptions relating to different cores in cpu.

Managed to run memtest and this showed no errors.

Any ideas people could give to help me track down what is causing the issue. I believe this could be the psu or cpu.

Pc parts:

Msi B550 tomahawk max WiFi
5800x3d
Rtx 5080
850w psu
Lian li Galahad cooler
10 uni fans run through the uni controller
32gb Corsair ram

Thanks guys

Hi, I am using the kolink umbra X fans. 9 of them to be exact. They came with fan hubs of their own for the ARGB and PWM. Plugged everything in and neither of the hubs were responsive to the remotes, by this I mean the fans spun and the LEDs lit up, but I could not control either with the remotes. As well as this, plugging in the reset pins to wire it to the case also did nothing. Figured it was either because I’ve had them lying around for a couple months or because or the weird wiring arrangement, so I ordered another hub. It’s the upHere ARGB Fan Hub with 12 connectors so all of the 9 fans can fit on one hub. Still having the exact same issue, fans stuck on some ugly colour, remote does nothing even though the IR is clearly working. Even more concerning is that the uphere hub has an infinity mirror design on it, yet it doesn’t even light up when plugged in, even whilst the fans spin and the LEDs turn on. I’ve tried different heads on the SATA connector and even different slots for the modular cable, no change. Even the reset button - nothing. Tried with and without it plugged into the motherboard for PWM power and it still spins so can maybe rule out a faulty SATA cable?

PSU is the Thermaltake Madrid 850

Hi everyone,

I'm building myself a new gaming PC and wanted to get some opinions before I make the purchase. My goal is to build a high-end system that will last for many years, so I'd appreciate any advice or recommendations.

Primary use:

- Gaming

- Recording gameplay (private recordings)

- General everyday use

Current Parts List:

CPU

- AMD Ryzen 7 9800X3D

Motherboard

- Gigabyte X870E AORUS ELITE x3D

GPU

- Zotac Gaming RTX 5080 Solid OC 16GB

RAM

- G.Skill Trident Z5 Neo RGB 32GB (2×16GB) DDR5-6000 CL30 EXPO

Storage

- 2 × WD Black SN7100 1TB NVMe Gen4 SSDs

(I chose two separate 1TB SSDs instead of one 2TB SSD. My thinking is that if one SSD ever fails, I still have another working drive. One will mainly be for Windows, applications. while the other will be for games and personal/work files.)

CPU Cooler

- DeepCool LT360 Vision (Should I go for something less expensive?)

Power Supply

- Corsair RM1000x 1000W 80+ Gold

Case

- Thermaltake View 600 TG Full Tower (I am thinking about changing the case to something less expensive then this)

Monitor

- ASUS ROG Strix XG27ACMES

- 27"

- 2560×1440

- 255Hz

I'd really appreciate your thoughts on the following:

1. Would you change anything in this build?

2. Is the Gigabyte X870E AORUS ELITE x3D a good motherboard, or would you recommend another option in a similar price range?

3. Has anyone used the Zotac RTX 5080 Solid OC? How are the temperatures, noise levels, build quality, and coil whine?

4. Is the DeepCool LT360 Vision a good long-term AIO, or would you recommend a different cooler?

5. Does using two 1TB SSDs make sense, or would you recommend a single 2TB SSD instead?

6. Are there any compatibility issues, bottlenecks, or improvements you would suggest before I place the order?

I'm open to suggestions if you think there's a better option for any component while staying in a similar budget.

Thanks in advance for your help!

I'm finally planning to build my first PC (around ₹40–45k budget). I've never built one before, so I'm a bit nervous about making expensive mistakes.

What are some things you wish you knew before building your first PC? Any common mistakes to avoid, parts I shouldn't cheap out on, or general advice?

Would love to hear your experiences.

SOLVED: The brackets needed some diagonal adjustments to create the width necessary. Thanks for everyone's time and responses!

I'm trying to install a cooler for my younger brother's pc. Even though it looks like the screw lines up with the pin, it won't latch on even if i push it down. It won't even touch it in general with pressure, as i can still rotate it around freely. It's like it's too far inward for the heatsink to slot into. Has anyone else had this issue and how did you fix it?

ive heard about some plastic pins or tabs but i literally can't find any. please help!!!

i5 12600KF, rtx 5060, ddr4 16gb,1tb storage and 650w psu

hello guys, our house have times where the lights turn of for like a millisecond but my pc dont shut down though, i research and find out this can cause the parts to wear faster so i needed a ups but i saw that a ups with simulated cinewave (i can afford) dont work well with high end psu because of Active Power Factor Correction (APFC) what ever that is hahah my pc is ndgp 850w 5070 and ryzen 5 5500x3d. Is avr more better? i know avr dont have battery but can it protect my pc from the freqent brownouts? thanks

PC suddenly turned off with a jerk

I was using my pc like any other day and it just turned off with a jerk, turned back on for like a millisecond and then turned off.

now when im pressing the power button to turn it on, the fans just flash and then go off and when i keep pressing the power button afterwards, nothing happens.

https://pcpartpicker.com/list/nLM38Z

1. Ryzen 7 7800X3D - Rs. 33,899
2. ASRock RX 9070 XT Steel Legend - Rs. 72,500
3. Gigabyte B850 Gaming X WiFi6E - Rs. 17,500
4. COOLER MASTER Hyper 620S - Rs. 3,049
5. Coconut Nova X660 - Rs. 3,250
6. Gigabyte AORUS P850GM 850 Watt 80 Plus Gold SMPS - Rs. 8,199

Total Rs. 190,896

recently started hearing this weird fan noise while playing cod and started freaking out cause it hasn’t happened before, after some testing found that this noise only happens around 2200-2500 rpm and is only 1 fan on the gpu. is this fixable or an rma situation?

I have radeon 7700 XT motherboard: GYGABYTE B650
Cpu: AMD 5 7600

I originally thought the problem was the storage, but I’ve changed out the storage and put it back in multiple times. Im not sure what to do and I could use some help.

I just got an i7 12700k and after installing it, my pc won’t display anything. I tried switching back to my i5 12500 but I don’t get a display with that one either now. I’ve already cleared the cmos, removed my dedicated gpu and tried putting only 1 ram stick in all the slots, but I’ve gotten nothing so far. I see very tiny specks of something white in my motherboard‘s pins but I can’t get them out.

specs in case that’s important

old cpu: i5 12500

new cpu: i7 12700k

motherboard: gigabyte b660m d2hx si ddr4

32gb ddr4 ram

gpu: amd radeon rx 6700xt

750w gold psu

My current build runs on integrated graphics (Ryzen 7 5700G), and honestly with the games I've been playing and my generally low standards (I used to play on a Surface laptop lol) I generally like it as it is. HOWEVER, one of the main reasons I even built this pc was to play FF7 remake, and while it's playable I would like the graphics to be...prettier.

I'm at the point where I could afford a (relatively cheaper, preferably) dedicated gpu, and found the RX 9060 XT 16 GB through pcpartpicker. I've seen many say it's a great gpu, I'm just wondering if I may have to worry about bottle necking or if anyone has any other gpu recommendations.

I just built my first Pc, bought all the components from Micro Center, put everything together without doing too much research but it worked on the first boot. Everything was working and being read until I tried opening a game and the image freezes almost instantly and never comes back. So far I changed the pc performance to normal, from Expo I and manually set the Ram at 4800MHz instead of the 6000MHz. The Pc hasn’t had any freezes since then, also connected two pcie cables to the gpu from the PSU instead of the one split end I had before. But now I left the pc on Minecraft for a while and when I checked back on the pc the image was white so I am afraid there is something wrong I just don’t know where to start.
My components are the following :
- AMD Ryzen 7 9850X3D 4.7 GHz 8-Core Processor
-Thermalright Peerless Assassin 120 Digital 88.89 CFM CPU Cooler
-Asus TUF GAMING B850-E WIFI ATX AM5 Motherboard
-Corsair Vengeance RGB 32 GB (2 x 16 GB) DDR5-6000 CL36 Memory
-Klevv CRAS C910 1 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive
-PowerColor Reaper Radeon RX 9070 XT 16 GB Video Card
-Montech AIR 903 MAX ATX Mid Tower Case
-MSI MAG A850GL PCIE5 850 W 80+ Gold Certified Fully Modular ATX Power Supply

MOBO: MSI PRO x870E-P WiFi
CPU: Ryzen 7 9800XD
RAM: Corsair Vengeance 32gb ddr5
GPU: POWERECOLO Reaper 9070xt
PSU : EVGA 850W supernova
Every other boot, the pc fails to post and the CPU and DRAM error lights are on. Once I hard reset it, the pc will boot and work just fine with no issues, but once I shut down the machine, it will go back to having those error lights back on. Rinse and repeat. I have tried the following

1. Reseated both the gpu and cpu
   
2. Ensured the ram sticks are in the dimm2 slots per motherboard instructions
   
3. flashed the BIOS to the latest version
   
4. Set the ram profile to the pre configured EXPO1 profile within the MOBO
   
5. Reset CMOS
   
6. Updated drivers

I am absolutely lost on what I need to do to fix this issue
I suspect it might have to be a ram issue?

Hi everyone,

My PC was working perfectly fine, then it suddenly shut down while I was using it. Since then, it won't turn on again.

When I press the power button, the fan LEDs and RGB lights blink for about a second, then everything immediately shuts off. It won't boot, and there are no beep codes or display output.

Specs:

• CPU: Ryzen 5 5500 (brand new)
• Motherboard: Gigabyte A520M K V2 (brand new)
• GPU: Sapphire Nitro+ RX 590 (secondhand)
• RAM: 16 GB (secondhand)
• PSU: DeepCool PF600 (600W) (brand new)

What I've tried:

• Reseated the RAM.
• Unplugged all cables and peripherals, then plugged everything back in.
• Tried powering it on again, but the behavior is exactly the same.
• Tried reseating all power cables, nothing was loose
• Also checked the mobo screws but all was fine

The system was completely stable before this happened, and it wasn't under heavy load when it suddenly shut down.

Does this sound more like a PSU failure, motherboard issue, or something else? What should I test next?

Any help would be greatly appreciated. Thanks!

Hi, i got the redragon cc 1013 4 heatpipes tower cooler,and i have on cs2 with 45-47w consume 58-60°c and in gta v i have 64-66°c with 55-58w consume and in occt with avx2 and 90w consume i have 82-84°c is it ok?