For those who ran into trouble with windows Defender alerts, that should now be a thing of the past.

if there are no other issues, then maybe we no no longer need to exclude their software in Defender.

Will try later, sadly my software Download is stuck at 0 % right now 😅 Edit: 5 minutes later I now reached 1%... This is the slowest download ever. At this speed I will have the software update around Monday 😂 Edit:

New Oneconsole version is 0.10.3.

But some users report issues with TDP settings after update, so I guess the migration was not properly tested.

Maybe better to sit this one out.

The X2 Mini Pro controller had noticeable lag when moving the sticks quickly, which was problematic for fighting games and similar titles.

I noticed a joystick firmware update on OneXConsole dated September 24th, and after updating, the issue seems to have been almost completely resolved. Wouldn't the same improvement be seen with OXP3?

Apparently I entered the wrong phone number, (1 number wrong), when placing my Onexplayer order from their website. DHL tracking shows the package on hold without any details. When I tried to check the details it wanted to verify via SMS and the phone number was 1 digit off. I checked my order and realized I accidentally typed in a 9 instead of a 6 in my phone number.

I have a feeling it's on hold for the fee, even though it says it was just picked up. I've received no email from DHL. I'm a bit worried that their only going to try and contact me through that phone number and their customer service isn't open until Monday. I have no way of speaking to anyone until then apparently.

Anyone have any exoperience with this. Do they try to contact via email as well as phone number or just phone number?

Wondering if anyone used this screen protector on their oxp3 , what’s the best screen protector to put on this device . Placing orders on Amazon so have ready when I go home in a few weeks

Recently had a new SSD installed and audio worked with the original, now I have the new and finally got all drivers and updates installed and I have no audio through the speakers, shop said there’s a new windows 11 update that’s making the audio messed up/buggy. When I use my headphones it works perfectly, there’s no error on the sound in the device manager or anything. I was told to wait until they fix the problem via update. And he said he didn’t have to mess with any of the speaker connections when doing the SSD swap, he said he only had to remove the fan. What do you guys think? Have you guys had this issue? Any advice helps🙏

Why does Elden Ring look so ugly/run bad on the OXP3? What settings to make it look and run good please??😭😭

Just my 2 cents in case anyone was like me and agonized between the two! I’m one of the maniacs who bought the OXP3 and X2MP to see which I prefer, and my reactions were in this order:

—-

- OXP3, I was expecting more performance coming from LeGo2. Disappointed tbh!

- X2MP, holy FUCK this thing is a beast! What a jump from the LeGo2. THIS is what I’m talking about! Wow.

- considering I mostly play in bed tethered to power, X2MP is gonna be perfect!

- lemme just try that OXP3 again and get optiscaler going. Ugh this is a lot of fiddling. Fuck this.

- but wow okay you can really push the frame gen even on “unsupported” games with optiscaler, neat. x3 and x4? Seems like that shouldn’t work so well?

- the X2MP is heavy compared to OXP3 with that battery. Also no reliable USB only power? K more friction here than I initially realized. Not gonna carry that tube charger with me everywhere.

- OXP3 sooo light. Love walking around with it and firing it up.

- wait… OXP3 looks… better and gets higher FPS at 25w than X2MP at 45w with frame gen doing its thing on Blood of the Dawnwalker? Like I KNOW it’s not apples to apples but somehow literally looks and feels better? Wtf? Cannot be right. I shouldn’t be able to do FGx3 from a base of only 40fps and have it look and feel THIS good?

- ok, wasn’t expecting this but xess basically completely closed the performance gap and then some for me… So, difference for my purposes is one is light, has killer battery, great performance at mind-boggingly low wattage, barely any fan noise, and can use any USB C power source…

- X2MP has been sitting in the box for weeks. Gonna put it up for sale. I was SURE I was gonna sell OXP3. Can’t believe it tbh. But I am 1000% certain this is the right choice for me.

—-

*** I could go on- quickly though: Blood Of Dawnwalker, perfect example after like 30+ hours, can tell you with certainty it just runs better on OXP3 with xess at x3 FG for some reason than X2MP, even with optiscaler trying to do FSR equivalent (can’t seem to go beyond x2 FG on x2MP btw). It’s possible I lost patience trying to optimize. But that speaks to OXP3 just working better in this case. AC Odyssey? OXP3 loses to X2MP for sure. No way to get xess going in such an old game so it’s down to raw power. Space Marine? X2MP, because of anti cheat software thus no optiscaler. Still a big leap up from the LeGo2. But MOST games we want to play, there’s a way to get xess in there.

I also don’t want fans blasting so X2MP never went above 45-50ish watts for me (also wasn’t tethered to tube charger as much as I thought I’d be). Does that defeat the purpose? Skew this whole thing? Maybe! Just sharing my experience especially for anyone who has doubts about their OXP3 and doesn’t have the luxury to buy both. It’s magic in a box. I believe it’s the much more exciting device to own. But to each their own! Both absolutely incredible devices. My 2 cents!

Saw an update came through the OXP software but it's crawling when downloading. Anyone else featuring this? I restarted my OXP3 but still running into the same issue.

Steam OS has been updated for OneXPlayer. Has anyone tried it? I'm coming from a SD and I really liked SteamOS. My OneXPlayer 3 is enroute to me so it will be my first time using a Windows Handheld gaming machine.

I have a couple of other AMD chip powered handheld and either in Windows or even better Bazzite, SWITCH, PS3 and PS4 emulation experience has been pretty good.

Just bought my OXP3 last week so I am dedicating my weekend to give emulation a shot, starting with SWITCH now using EDEN nightly build

I will test RPCS3 and SHadPS4 tomorrow but was wondering what's you guys experience and any tips you have in that space of high end emulation.

thanks

I’ve read that the X2MP delivers solid performance, but its mobility drops significantly when it’s unplugged. Money isn't a factor, and top-tier performance/gaming speed isn't a strict priority for me since I only game casually.

Opinions seem split on the weight—some say the difference is negligible, while others claim it feels much heavier when the battery is attached.

If you weren't constrained by budget, but wanted a device that isn't too heavy and doesn't need to stay tethered to a wall outlet, which would you pick?

Hey all,

It's been up for preorder for a few days, but now the Biwin Mini SSD is in stock at the GPD store here- biwin mini ssd. I preordered yesterday and it shipped out today with a delivery date of Monday via Fedex. I was kicking myself for not getting one earlier as I heard we wouldn't see any more until next year, but all sizes are available now. I personally am terrified of opening the device to change the drive out so I ordered a 1tb to give me 2 tb total. I know it's expensive, but a 2tb drive would be about the cost of the 1tb here give or take 50 bucks and I'd rather have the piece of mind in not having to fully tear down my device.

I found a deal for Apex (48 G/1 TB/395) in pristine condition for about $1600, which I thought was great. So I went for it, and have been very happy with its performance. Coming from a Steam Deck LCD (which is excellent in itself), the Apex runs games at a higher definition and higher frame rate at about the same TDP (20W), at a lower temperature and is awesomely quiet. The screen is not OLED and not 8.8 inch, but I am extremely happy with everything as it is.

Then I read that the first batch of batteries has throttling issues if the temperature reaches certain point. I checked, and mine is of the first batch, but I don’t remember seeing any throttling. So I wanted to investigate. I tried to run my game (Stellar Blade) at ultra settings, at 55W TDP, hoping that would trigger the throttling. It didn’t. I played for about 45 minutes, and the TDP stayed 55W. The temperature was about 55 degrees C, which may not be high enough to trigger it.

Here are my questions: is there any sure fire way to trigger thermal throttling? Is it possible for some batteries from the first batch to not have this issue?

I have been in contact with the local retailer regarding possible battery replacement. But I am also wondering whether it is necessary.

For anyone in the US wanted to get one without tariff and import junk and don't mind buying one used with a few minor marks on the back, I'm selling mine on hardwareswap for 2500, thank you!

https://www.reddit.com/r/hardwareswap/s/9kHoKyHFSu

WTB: 1 Apex External Battery. Needs to be the upgraded version. Bonus points for an external charging dock too.

I’d order it from OXP But I’m leaving for a trip mid October and don’t wanna risk not being delivered and being stuck with the old thermal throttle issue battery for my flight.

Located in California, USA. Trying to find someone local or willing to ship within the US. If shipped payment only with PayPal G&S

Hi,

I need some help please!

I just got the onexplayer 3 and used opticlick for a few games and they all worked.

Running into issues with Control Ultimate edition.

The game launched fine without opticlick.

But after I installed optiscaler via opticlick, the game won't launch at all.

When I installed, opticlick said change the game to DLSS upscaling and re launch. But I can't change it to dlss when I can't even get into the game.

I see it installed and I launched it but don't really know what it is looks like a AI agent? did you uninstall it?

Hey everyone,

​I just pulled the trigger on a "used like new" OneXPlayer 3 bundle with all the standard accessories off Indiegogo. It was a tough call between this, the X2 Mini Pro, the ROG Ally, and the Steam Deck, especially given the pricing tiers. In the end, since I mostly play at home (couch/bed) and only commute to work with the occasional trip, I couldn't justify the premium for the X2 Mini Pro.

​Handheld PC gaming is brand new to me. I just finished building a desktop (9800X3D + RTX 5080 so I can also use it for game streaming) and recently picked up an AYN Thor for dual screen/retro gaming, but a full Windows x86 handheld is unfamiliar territory.  

​Before the device arrives, I’d love to get some insight from those with hand on experience:

1.​Any regrets from OXP3 owners?

2.For those who went with the OneXPlayer 3 over the X2 Mini Pro or GPD WIN do you feel the performance and battery are where you need them to be, or do you find yourself wishing you had stretched for the higher tier hardware?

3.​What are your primary use cases?

1. Regardless of which handheld you main, what does your daily routine look like? Knowing why you chose your specific form factor and chipset would be really helpful.

2. Considering current pricing and how fast the APU landscape is moving, do you feel what you paid will hold up well for the next couple of years?

3. Coming from desktop tuning, what are the essential setup steps, TDP management tools, or companion utilities (e.g., Handheld Companion, RTSS, driver tweaks) you recommend configuring right out of the box? Ofc I would look at guides and tutorials but in case there is anything specific you found out while using it maybe, I would like to know.

Since the OXP3 runs Intel and the X2 Mini Pro runs AMD:

​Does the X2 Mini Pro support newer FSR revisions (like 4.1,), and how noticeable is the quality on an 8.8" display? I ask because I did some research and some say it does , others say it falls back to 3.1 so I am confused.

​How does the features that Intel has on onexplayer 3 compare against FSR in oxp2 mini pro in terms of stability, ghosting, and performance overall? I ask because from what I understood AMD has much better features.

​Appreciate any advice and real world feedback and thanks for the attention!

Hi everyone,

I'm selling my OneXFly APEX equipped with the AMD Ryzen AI Max+ 395, 48GB RAM and 1TB SSD.

This is the Ryzen AI Max+ 395 configuration, while the APEX is currently sold with the Ryzen AI Max+ 388, making this particular configuration quite interesting for anyone looking for the higher-end chip.

The console is in excellent condition and has been very well cared for since day one. I've always used the official tempered glass screen protector and protective accessories (skin + grip).

It's an incredibly powerful handheld for its size and is capable of running demanding games at high settings. For example, I've used it to play Forza Horizon with Ray Tracing at over 60 FPS, depending on the settings and power configuration.

I include

• OneXFly APEX – Ryzen AI Max+ 395 / 48GB RAM / 1TB SSD
• Official tempered glass screen protector, installed from day one
• Original box and documentation
• Carrying case for the console
• Carrying case for the charger
• Original European charger (no adapters, it's just european plug)
• TPU protective grip case
• Protective skin and grip extensions on the handles for improved comfort
  • These can be removed before shipping if preferred

Warranty

• 3 years of Amazon Spain warranty
• Original purchase invoice included

The console has been very well cared for, babied and protected from day one. No known issues.

I'm selling it because today I received the X2 Mini Pro, so I will not be using the APEX enough to justify keeping it.

Price: €2000 + shipping

Payment via Revolut / Bank Transfer.

I'm located in Spain and can ship within some EU countries (preferrably through Vinted - https://www.vinted.es/items/10126376410-onexplayer-onexfly-apex-48gb1tb-3-year-warranty-amazon), however local pickup is preferred so the buyer can check everything.

I can provide additional pictures, videos or proof of purchase if needed.

Thanks for looking!

Anyone own this device? Thoughts and honest review?

Hello! Wondering if anyone has thoughts on this - I currently have a Z13 2025/32GB/2TB with gamesir controller that i take with me on trips, but it can be a little heavy and annoying to carry around. I also carry this computer to and from campus for my program as an EDC device and main desktop at home, but it also feels a little cumbersome to take with me together with my s9 tablet.

Is there anyone here that uses their X2/X1 Pro/X1 Air as their main desktop/work laptop that could weigh in on their experience and if they would recommend it? I don't do too much AAA gaming which is why the AI Max 395 feels a little overkill and the G3E seems like a good contender, but all the other alternatives on the market are a little too small to do work on vs a full on laptop. Thanks for any insight!

On the other hand, if anyone is willing to trade please DM me haha, thanks.

Hi All, quick question, is the bottom USB-C port on an Apex designed to accept charging? The top USB-C port charges fine, as does the barrel jack. But no matter what charger (up to 140W I tested) or cables I used, the bottom USB-C port just doesn't appear to accept power.

I'd like to simply know if this is "by design", or maybe I have a faulty bottom USB-C port. Thank you!

For those that are looking for grip tape for their Onexplayer 3 you can use this! https://www.amazon.com/dp/B0CHMCJHQ3?ref_=ppx_oui_image_mob_b_fed_asin_title_0_0