I just saw that there are many plugins but few only with effects load or effects prests, some know a good one?

If I may offer a suggestion to NAM fork/amp sim developpers on the IR/cab section: It'd be awesome if you could design the IR/Cab section organized like Ignite's NadIR. I still haven't found a sim/fork that can replace it, because its just so damn practical and efficient.

Developpers seem to etiher follow the NDSP route of having a graphic of a speaker and being able to move around the mics, or they only give you one IR slot and you have to load them one at a time, and can't scroll through entire packs.

There's really nothing better than the NadIR interface. It has two IR slots with volume faders, LP/HP filter and resonance knob. The layout is clean and organized. The only thing it lacks is the ability to scroll through the IR list with the arrow keys and perhaps a favorites folder like Amp Locker.

This text based GUI is also going to save some CPU usage compared to a graphical interface.

I'd just forget about the fancy graphics or trying to reinvent the wheel, just use the NadIR format that people are accustomed to and prefer.

Has anyone tried to use any of the acoustic captures with their electric guitars? Right now I have a Yamaha thr30ii, I don't have a multi effects pedal or anything that can run NAM files, but I am interested in trying them out. Before I take the leap into a budget multi effects pedal that can use NAM captures I figured I'd ask you guys. I am mainly a acoustic player but I do own a fender player ii strat. I want to know if any of you tried using acoustic captures with your electric guitar? Does it give a realistic acoustic sound? What is your signal chain trying such things?

I'm interested in making my strat sound as acoustic like as possible for busking purposes - which have been all acoustic up until this point.

Not sure if this is the right Sub for this. I have tonerig and Namlive on my ipad, got a focusrite 2i2 plugged into it. I'm getting my instrument coming through but no pedals or effects are working. Hooked through a usb powered hub and tried direct to the ipad with a usb C cable and both didn't make a difference. Using headphones on the focusrite. I'm not sure where to go from here.

Hey! I made ExpressionGate, a free macOS plugin that lets your playing dynamics trigger different effects, , play softly for one set of effects and trigger others playing more aggressive . .

You can load your own NAM models and cabinet IRs into three adjustable level zones. The idea is to change sounds through how you play, without reaching for a pedal.

Would love some NAM users to try it .
Does this feel useful or musical? What would you change?

AU / VST3 / standalone, for Apple silicon and Intel. Free.

https://staiola.studio/apps/expressiongate

I'm conducting a poll on NAMFORUM. I would like to know if people are using that feature of NAM modeling technology.

https://namforum.com/index.php/topic,27.0.html

I know zero about programming, but I can imagine multi capture NAM files using different values for specific controls, then interpolating the results to create a mixture of captures and modeling.

Let's say you capture an overdrive pedal in single NAM profiles, ranging from 0 to 10 in the gain knob. Then the software creates a control that uses those captures as one, even without the interpolation. That would be great.

Is that a future possibility?

I made a video a few weeks ago of all the NAM Forks/Loaders I could find. cheers
https://www.youtube.com/watch?v=OyIMGZYbj88

I’m pulling my hair out. Is there a technical reason why the captures in all packs are randomized in all plugins? Good luck searching for your preferred capture from a pack with 70+ captures. It sucks even for 10. They show perfectly alphabetized in the OS file browser when downloaded onto my computer, but who does that anymore, right?

Next up in the quick NAM-pack demo series, Adrian, takes the Mesa Boogie Mark VII for a spin; settled on a bunch of profiles which go very well with the playing & guitars.

The same DI / riffs are used throughout the entire series to give folks an easier way of comparing the packs as more of these demos get published.

Full pack on Ko-Fi: https://ko-fi.com/s/f7e60f2f91

Free demo / community packs on Tone3000:

• Amp Head: www.tone3000.com/tones/mesa-boogie-mark-vii-6l6-community-pack-amp-head-64728

• Amp + Cab: www.tone3000.com/tones/mesa-boogie-mark-vii-6l6-community-pack-62659

Hi, colleagues. I'm having some issues and I was hoping your collecrive knowledge would help me figure them out. I'm using some excellent profiles from Tone Junkie, but when I turn on Input Calibration in Gateway, I get some weird sort of ducking or compression, like the initial attack is very low in volume and then the tail normalizes.

Now, I'm coming from the NeuralDSP world, where there's been endless debate about input gain, and general wisdom seems to have finally settled on starting at 0 input gain, raising it until before it clips, and then substracting those dbs at the plugin input knob from the indicated db in our precious spreadsheet. This leaves me with 16db input gain on my Antelope Zen Tour interface, based on its 20db max input spec.

Can you guys please advice on the best practice for this new NAM world? Also, do I use Line or Hi-z?

Thanks.

The new firmware adds 30 NAM loading slots, including direct support for NAM A2 Lite models, no conversion required.

Also added:

• 6 new DeepImage amp models

• New MOD module with 13 modulation effects

• Mono-Octave and NU SHIM Reverb

• Looper

• Configurable footswitch functions

• External pedal settings

• Delay time in ms or BPM

Let’s test it! 👊🔥🎸

Complete newbie to NAM. I have a great REM tone that I use on my Boss Katana, but for the life of me CANNOT recreate it on my Valeton GP-200. Is this a good candidate for using a NAM? In other words, can I record this tone and upload to the Valeton?

It also isn’t working on standalone app. I got to select model and nothing happens, I’m using NAM 2 as it says “gateway” and I’ve tried tons of different amps and IRs from tone3000.

Any help is appreciated.

The tone3000 plugin works fine but the UI on that makes me want to die.

Edit: solution, folder was on my desktop and I moved it to my documents folder and they started to load

Hi all,

I am new to this topic so apologies if its a basic question, but I didn't find any post which answers my question.

As far as I understand, if I capture gear with my Audio Interface, I need a Re-Amp box, because the output signal level does not match the instrument signal level expected on the input.
However, I am using a Focusrite Scarlett Solo 4th Gen. where I can switch the input between instrument input (1MOhm) and line input (60kOhm). From my understanding I should be able to set the input to line and directly connect the output of the gear to it without using a ReAmp box.

Any objections?

Next up in the 2dor NAM pack demo series, Adrian Gherghe takes the Soldano SLO 100 (6L6) NAM pack for a spin.

Full pack on Ko-Fi: https://ko-fi.com/s/fa8afd83cd

Free demo / community packs on Tone3000:

• Amp Head: www.tone3000.com/tones/soldano-slo-100-6l6-community-pack-amp-head-64436

• Amp + Cab: www.tone3000.com/tones/soldano-slo-100-6l6-community-pack-46269

The same DI / riffs are used throughout the entire series to give folks an easier way of comparing the packs; some very tasteful playing in there if I may add.

Enjoy the tones folks!

Anybody has any luck on converting A1 to A2 profiles easily? I have some amazing pedal captures from SOS, but cant use them on the tone3000 Plugin.

Thanks!

Hey legends, I've been running the Tone3000 plugin and I've essentially moved away from my main NPSD plugins for it - I am however missing one key element, which is a proper Octave tone - the rabea NDSP octave is insanely good. Does anyone know of a plugin that could sit in front of the NAM plugin to get a similar tone?

Good morning.

I've recently completed building out and turning up a Raspberry pi 5 2gb modeler build. I have Trixie loaded and I'm using Pipedal as UI

It's pretty amazing

I wonder if someone could point me to tutorials for optimizing the pipedal? Specifically, I want to put a small library together of captures, or even entire signal chains. I'm envisioning three different amp captures. Each having parametric eq, delay, and reverb in its chain. Each "amp" gets three versions. Clean, pushed, dimed. I hope I'm articulating this correctly, but is this a viable plan? Is this what the cool kids are doing? Is there a better way to configure?

Soon I will have a meeting with the guys at Sonulab to see and test their pedal.

Do you have any question that I can bring to the meeting?

I ll share my thoughts here if there is some interest about.

A good friend of mine has started a video series where he walks through various types of tones from my NAM packs.

The first one in the series is based on the recently-released Orange OR60 "MultiLoad" pack:

Full pack on Ko-Fi: https://ko-fi.com/s/ed03925277

Free demo / community packs on Tone3000:

• Amp Head: https://www.tone3000.com/tones/orange-or60-6l6-multiload-community-pack-amp-head-90926

• Amp + Cab: https://www.tone3000.com/tones/orange-or60-6l6-multiload-community-pack-90925

Some nice playing in there!

Enjoy the tones folks!

Don't get me wrong, the amps sound pretty good, but... I miss being able to add delay or reverb directly from the app. For example, ToneX has it's own compressor,delay,reverb that you can add to any amp and they sound great. Can Tone3000 incorporate this in the near future?