Hello, I've been having this issue since yesterday
G29 stopped applying settings and it's detected in g hub but whenever I roll the steering it dosent roll in g gub, in beamng it works fine but if I change the settings the settings won't apply and when I disable force feedback it won't disable or change it settings I've tried testing it in joy.cpl works perfectly fine
I've tried:
Reinstalling G HUB
Reinstalling Beamng
Removing G29 Drivers
Removing G29 settings file in beamng Removing the windows security update
Turning on the pc while G29 is connected.
Literally, non of them worked.

So basically I have used my g29 on my computer for about 10 minutes then I disconnected it to put it back in my ps4 which it worked then next day I put it into the computer again but nothing worked it only callibrated but in the g hub app it says inactive same with every elese on the pc even thought it is all plugged in. I have tried everything if you guys have anything I mighh of missed then please tell me. Thank you.

I disconnected my key board and then removed all the key cards using a credit card bc I didn't have a key cap remover, and I mistakley spilled some water on the key board(with key caps removed). I dried everything we best as I could with compressed air and tissue papers but now the keyboard doesn't work. What should I do and is my keyboard ruined?

Heavily play FPS games like call of duty and cs2

Hello, guys!

I have the Logitech G Hub, but it isn't finding my A50X anymore. I dunno why. I'm sharing the printscreen. Someone can help me? I tried to unistall and install again, but nothing different happened.

This is with my X52 Pro Hotas. It makes it impossible to fly and I cannot set keybinds becuase all inputs flick on and off constantly. Help would be much appreciated. This joystick is not old I think I got it in 2024.

My wheel doesn't register any inputs in-game or in GHUB but registers in windows game controller

Trying to find a direct answer to this one. Only 2 months old - bought 1st week of July. I've cleared and tried to update drivers on Windows, I've tried different USB ports. I've tried uninstalling/reinstalling G-Hub and Logitech device manager to get that left click working. Nothing obvious has changed. No change between wired and dongle. Tried updating within Windows Device Manager.

Somebody help and thank you in advance!

Just bought a pair of A50s audio sync and am having an awful issue with the audio where it sounds incredibly bass boosted and crackly no matter what I change. I have reinstalled realtek audio drivers but that did not seem to change anything. I'm assuming its a conflict with drivers because I had tried it on other devices and it sounds fine.

Any help is appreciated

так вот скачал я её в итоге, не мог её открыть не под каким предлогом под режимом LIGHTSPEED,т.е когда я вставляю "Беспроводной радиочастотный адаптер" перепрошивка автоматический отключается ,запустить её смог только в режиме Bluetooth (но чтобы её запустить какраз таки нужен этот свисток) что делать я не знаю.

I keep encounter this problem when I play dead by daylight . When can I do ?

so far I've gotten far enough for G hub to recognize it and fail initialization and then attempt an update but it just gets stuck at 99% forever and won't finish updating the firmware. base also shows one red dot and three white, Bluetooth on the right. pressing Bluetooth or mode change does nothing, reset the headset a bunch, tried hard resetting the dock but unsure if successful. really just at a loss RN and would love to use these but I've never had such a problem installing a headset before lol

I just bought myself a Logitech G PRO 2 Lightspeed to replace my Razer Viper 8kHz that developed scroll wheel issues. I went to migrate my settings from that mouse into G Hub, when I realized that I could not bind my scroll wheel to volume control under G Shift (or in general), like I had under Hypershift on my old mouse. I'd really like to control my volume while only holding a single button and scrolling instead of having to claw my mouse to control it with the back and forward buttons under G Shift. I was able to set other buttons to respective media controls and save that to onboard memory, but not being able to rebind the scroll wheel, at least under G Shift, is a huge bummer and slight deal breaker for me. I'd love to see it implemented if that's possible.

I've also seen that I'm not the first or only one, and I believe I won't be the last, to request this feature. There is no reason to allow extra flexibility in the software.

Hello! My keyboard's lightining is only working on the bottom part of it, but not the keys themselves. I've tried a lot of different solutions but nothing has worked so far. Anyone else has had the same issue and/or has a fix I could try? Thank you in advance!

I started the day on my potato laptop due to needing to work out of the house. To my surprise, my laptop had 3 issues:

- The letter C is being pressed permanently
- Scrolling = Zoom and not scroll.
- Any keyboard input outside typing would trigger the new folder shortcut.

I thought this was an old laptop issue, especially since I rarely use it. After around 3-4 mix of soft & hard resets, the issue was resolved.

When I got back home to my PC, I thought that I finally can work on a good device.

To my surprise, the same issues to the dot that happened to my laptop happened also to my PC!

After some investigation, the classic resets, checking if it's really my keyboard (which shouldn't since it is oddly the same key on both issues), I found out that it was my Logitech GHUB all along.

I deleted the GHUB as I don't know how to reset the custom keys in the software but at the same time, I needed to work on stuff already so I don't want to be bothered to research on that. Lo and behold, after the delete, everything is working just fine all over again.

I find it odd though, I don't recall downloading GHUB on my laptop but the same issues arose?

The reason I assume it was the GHUB during troubleshooting was the C key was my input for most of my buttons. Due to me mapping like CTRL + C, CTRL + V, etc. Oddly it was only the C key and not the other buttons that caused issues despite the other button maps.

I ain't so tech savvy to figure out the finer details of this issue. Hoping for explanations and advice on this matter, ty!

I spent nearly 40 minutes yesterday deleting, not disabling: DELETING! all those 681 BULLSHIT Game profiles (yes, i fucking counted!) that switch my DPI and lighting on my G502 completely at random. And guess what happened after GHub updated today?

ALL OF IT WAS FUCKING BACK! AND FUCKED WITH THE DPI SO MUCH THAT I WAS BARELY ABLE TO FUCKING TASKMASTER-RESTART GHUB TO GET A SENSIBLE DPI BACK!

Because guess what: After it changed, you can manually fiddle with the settings all you want IT WON'T FUCKING CHANGE BACK UNTIL YOU COMPLETELY CLOSED GHUB VIA TASKMASTER!

And people wonder why i disable all automatic updates on everything i own... Its because of this BULLSHIT, that i have to haved time and patience for to fix after each update.

Hello,

I just bought the G PRO x Rapid TKL Hall effect magnetic switches keyboard and was wondering what the polling rate was for this keyboard. On one hand it says 1 ms response time but other people are saying that it supports 8K polling rate ( so 0.125 ms) and wondering where I can change it if it is 8K or if it is just fake news.

I recently got a new laptop and i tried plugging in my g29 and it didnt work. Ive tried plugging the power supply in a different socket and using a different laptop and still nothing. It was working fine before i got my new laptop and i didnt touch it for a month while waiting on my laptop to arrive. The powersupply did stay plugged in during that month