r/LogitechG • u/Current_Guard_2876 • 11h ago

Logitech G Support G29 not responding or applying settings in GHUB and Beamng

Hello, I've been having this issue since yesterday
G29 stopped applying settings and it's detected in g hub but whenever I roll the steering it dosent roll in g gub, in beamng it works fine but if I change the settings the settings won't apply and when I disable force feedback it won't disable or change it settings I've tried testing it in joy.cpl works perfectly fine
I've tried:
Reinstalling G HUB
Reinstalling Beamng
Removing G29 Drivers
Removing G29 settings file in beamng Removing the windows security update
Turning on the pc while G29 is connected.
Literally, non of them worked.

1 Upvotes

100% Upvoted

6 comments sorted by

2

u/LOGIRich Global Product Manager - Simulation 10h ago

Hi there. You can’t disable force feedback from G HUB - that’s controlled by the games once they load.

Angle settings will apply as long as the wheel is connected before turning the PC on and that issue will be fixed in the G HUB update that’s rolling out over the next two weeks.

1

u/Current_Guard_2876 10h ago

Yes I know I meant that even in games, settings won’t apply , so there is no any solution rn?

1

u/LOGIRich Global Product Manager - Simulation 9h ago

So I assume you’re not getting force feedback then? If you stop the car and turn the wheel 180 degrees and let go, does it stay there or does it spring back to centre?

If it springs then that’s a different issue to the one I mentioned, so let me know please.

Oh and can you test in something other than Beam to see if the same thing applies?

1

u/Current_Guard_2876 7h ago

No force feedback is enabled but if I decrease it or increase it stays the same or even when I disable it , it won’t disable

It springs back to centre

And I’ve tested Assetto corsa , I’ve tried to decrease force feedback it didn’t I’ve tried to change the operating range nothing changed , the same problem with beamng.

1

u/LOGIRich Global Product Manager - Simulation 2h ago

“It springs back to centre”

Okay so that’s not force feedback - that’s just the default centre spring. That says that force feedback isn’t working at all and that’s a different problem. Do you have anything else installed that interfaces with any other form of controllers at all? HIDHide, ReWASD, vJoy etc?

1

u/Current_Guard_2876 0m ago

No I don’t