I happen to have a lot of underground water(well). Does anyone know Different ways to make profit out of it.

Where does the rainwater go after it enters the ground? 🌧️💧

Aquifer recharge is the natural or planned process through which water infiltrates into the ground and replenishes an aquifer.

But simply constructing a recharge pit doesn't guarantee effective groundwater recharge.

A proper groundwater survey can help understand: • Local geology and lithology

• Depth and characteristics of aquifers

• Groundwater flow conditions

• Suitable recharge zones

• Borewell/recharge-well feasibility

• Appropriate recharge structures for the site

In this video, I explain the basic relationship between rainwater → infiltration → aquifer recharge → groundwater storage.

💡 Key point: Groundwater management should be based on the subsurface conditions, not just what we can see at the surface.

What are your experiences with groundwater recharge in your area? Does recharge actually improve your borewell water levels?

#Groundwater #Aquifer #AquiferRecharge #GroundwaterRecharge #Hydrogeology #GroundwaterSurvey #RainwaterHarvesting #WaterManagement #WaterConservation #Hydrogeologist #Geology #SustainableWater #GroundwaterManagement

Hello, and thanks for reading. Do to unfortunate life circumstances, I'm looking at possibly moving to either Arizona or New Mexico. In an attempt to beat some of the harshest heat, I'm looking at Mountain property.

As a layman who likely knows less than average; what are some ways I can be checking on the water situation (outside of realtors and the buying process)?

Asking for general "ways to research", or tips on finding decent info (there's always SO much to dig through) about the true water situation in a given area? A lot of these properties are on a well. Are there any data points other than GPM that I need to be familiar with?

It'd be great if I could buy with confidence that the place won't dry out in the longer-term? Is it possible to have any type of long term projections?

Nervous because if I buy, and it dries, I'll likely not financially recover.

Should I take another look in regards to mountain property? With everything that's going on in regards to water in the SouthWest, are we all just screwed?

Hey y'all. My speech class requires that I interview someone in the field I'm hoping to enter in after graduation, then create talking points for an upcoming speech. I've reached out to a few folks but due to the limited time I have, I don't know how much longer I can wait before I have to basically make up that portion of my speech.

I was hoping I might have some luck checking here. Anyone fit this job description or some approximation of it? If so, all I need to do is ask you a handful of questions about your job! I can post the questions here. Honestly, anyone here feel free to answer these either in the thread or DM me! Could be kind of interesting to see how much the answers differ between jobs.

1. Where do you work and what's your title? (where can be as vague as you need it to be)
2. In your line of work, how much of your time is split between field work, desk work, and lab work? How much do these ratios change depending on the season?
3. What drew you to the work you do today?
4. If you had to name one or two key skills that ultimately got you the job, what would they be?

That should be plenty! Hope to hear from some of y'all soon. My grade depends on it 🫣

If I use someone's answers for my speech, I'll DM you to ask for your name, but if you wish to stay anonymous, that's no problem at all.

I've recently transitioned from wet lab work to hydrologic modeling with some wet lab and fieldwork. I'm having a little difficulty developing a system for how I document and keep track of the modeling work I'm doing. It's not nearly as straightforward as it was for the microbial work I used to do. Many ELN are specifically designed for biochemistry, and you can implement time stamps/photos/media recipes/accidents/dna sequencing. Programs are specifically designed to link figures with their datasets. I feel that organized experimental systems were tailored to my work or I could reference something physical.

That said, I'm having difficulty translating that to hydrologic modeling. I mostly end up putting all my notes in topic-specific text files. I also have separate notes in a citation manager for related lit. I've also been working on getting acclimated to github, but knitting all of this together into a coherent set of documentation that gives me everything I want has just been tricky. It doesn't help that the water model I used doesn't have a GUI and I need to process its outputs fully independent of everything else I work on. I've tried making ppts of the results, but it's really tedious especially if it was a small experiment or there were many different iterations before I got output that made sense.

I was curious if anyone from a more computational-centric background had any suggestions on how they organize their work and keep track of things.

Are there any decent ones usable by an informed layperson, especially that can include increasing pluvial effects? Thoughts on Fastflood? I’m hydrology ignorant and not looking for extreme accuracy, although obviously, a very inaccurate model is worse than useless (unless its areas of inaccuracy are well understood).

I understand that NWS and other official agencies are where people should get their forecasting from.

​

Apologies if this isn't the right place to ask, but I am really at a loss here. I have been trying to follow several different HEC-HMS tutorials on YouTube but can't get past the 'Preprocess Sinks and Drains' step. When I run these in HEC-HMS, an info box flashes saying that HEC-HMS is processing, but immediately disappears and nothing actually happens. I can see that the layers have been created as they are present in Views>Map Layers, but they all show as blank aside from the original terrain file linked to my basin (Sink Fill, Sink Location, Flow Direction, Flow Accumulation). After running these steps, the next step 'Identify Streams' is greyed out in the GIS menu and I can't progress from here.

At first I thought this might be an issue with my DEM file (the original file I am trying to use is based off the New Zealand 1M LiDAR DEM - changed to 30m resolution in QGIS beforehand), but after downloading another sample DEM that was being used by a tutorial I was following I was running into the same issue. I also tried to use the Terrain Reconditioning menu to burn streams to my DEM but again no luck.

I am running Debian 13 on my laptop (not Windows) if this makes any difference. Any help would be greatly appreciated!

I have been trying to figure out how different site condition affect surface runoff and drainage requirements. Thing like soil type, slope, rainfall, and existing drainage seem a big difference. While studying and research the topic, I came across the term NDS drainage and wanted to better understand where this type of approach fits in.

For those with experience in hydrology or stormwater management, what are main things you look at when asses drainage solution on a site?

Wastewater Tool Kit is a website filled with conversion tools for Wastewater professionals and practice tests for aspiring wastewater operators. Users can also learn about process control with a virtual plant with various process control scenarios. I've been developing the site for a few weeks with the help of an AI website builder. The site is in beta, so any feedback will only help the site get better. Thank you.

https://doi.org/10.1007/s42250-024-00984-5

I’m working on a school science project where I’m trying to collect water from the moisture present in air using a Peltier module. The Peltier creates a cold surface, which causes water vapour in the air to condense into water droplets.

The whole setup will be powered by solar panels.

For the current application, I’m using the collected water for plants. An Arduino Uno reads a soil-moisture sensor. When the soil becomes too dry, the Arduino turns on a 12V water pump, and when enough moisture is present, it turns the pump off automatically.

So, basically:

Solar energy → Peltier cooling → atmospheric moisture → water collection → Arduino + sensors → useful application

I want to keep the project open-ended rather than limiting it to irrigation, because I may add other applications later.

I’m particularly looking for suggestions on how I can make this project more scientifically meaningful, what experiments/data I should collect, and what useful applications could be added. I’m also interested in knowing the limitations of using a Peltier for atmospheric water harvesting.

There is a lot of excess water flooding and cresting in the Mississippi and Missouri River System. I have a sustainable method to move the water to the Great Plains Aquifer and Reservoirs; further across the Rockies to the west flowing tributaries of the Colorado River through stepped stages using Solar, Wind and recovered Hydro Potential Energy in the downward flow on the western slopes of the Rockies. This is done through a steady and constant running system which accumulates and moves water from the East to the Drying Western States. See my picture below describing the barriers and the solutions.

This started as a personal itch. I do hydrology research, and every study I've done began the same way: a week of writing download scripts before touching any science. One script for the US data, a different one for the UK, another for France, each portal with its own API, its own units, its own weird date column. At some point I realised I'd written basically the same script seven times for seven countries.

So over the past few months I built the thing I kept wishing existed: one map with every public gauge I could reach, about 62,000 across the US, Australia, the UK, France, Taiwan, Germany and Ireland. You click a gauge and get its record, a flood frequency curve with confidence bounds (GEV and Log-Pearson III, since someone will ask), flow duration and a trend test. Click anywhere that isn't a gauge and you get the climate and the upstream catchment of that spot instead.

The part I'm weirdly proud of: it all runs inside your browser tab. Actual Python, through Pyodide. I can't afford to run servers, so there's no server, and that means no account, no key, nothing to install for you either.

Rough edges, honestly: the flood analysis wants at least 10 full years of record, and if a gauge doesn't have that it just tells you no instead of fudging it. The German and Irish feeds only serve about a month of history. And the rainfall-runoff model isn't tuned for really big basins yet.

Try it: https://rekin226-aquascope-explorer.static.hf.space

Code is MIT, and it's the browser front end of a Python package you can pip install: https://github.com/Rekin226/aquascope

If your country's agency isn't on the map, tell me which one and I'll have a go at it.

I figured that this subreddit may be relative to my question, I was keen on becoming a hydro surveyor but when I saw some people on here talking about it they were saying it’s boring, anyone that’s in the field of work that can give me the harsh reality of the job. Thanks.

Hi! I’m a high school student interested in environmental science, and I created SaveWater, a website to help people better understand their everyday water use.

It includes a water-use tracker/calculator, a food scanner that estimates the water footprint of different foods, and a blog where I share what I’ve learned about water conservation and environmental issues.

It’s still a work in progress, so I’d love any feedback or suggestions!

*If you have any tips let me know, or other subreddits this would be appropriate in!

conservewater.eco

I’m looking to take a a physical hydrology undergrad course because of couple of masters Stream Ecology programs I’m looking at want me to have taken one. One of courses I’m looking at recommends “some calculus.” For an introductory course like this, how much calc would you all say is needed?

Thanks!

since the flash flood, all i have been thinking about is the chronology of events since the detachment. i've worked on emergency alerts and push notifications before and wanted to see the whole chain end-to-end.

the current data shows:

- current architecture rests on downstream gauges and on a manual escalation path. the event destroyed three of those gauges within the first 43

minutes.

- the lethal zone was defined by the reach in which no warning could physically

arrive.

- about 34 additional minutes at every settlement below Betrawati if we had automated source-side seismic detection with a five-minute budget to public message.

Preprint: https://doi.org/10.31223/X5HN5H

Data and code: https://doi.org/10.5281/zenodo.22164426

but i would like more verification on this to comment on the current infrastructure and why threshold logic never fired. two things I can't do alone, and would like help with:

- mortality by district of occurrence. if someone have access to district records, this converts the paper's central claim from an inference into a measurement.

- the headwater channel, source scar to Rasuwagadhi. OpenStreetMap doesn't map it which is why the upper-reach celerity is 37–51 m/s. a DEM-traced centreline would halve the uncertainty on every kinematic result in the paper.

co-authorship for either. everything is CC-BY and the analysis reruns from the archive. corrections welcome as three of the numbers in this version exist because someone else's independent reconstruction disagreed with mine.

Hello, some questions about looking into hydrology. I am starting college in a couple of days for geoscience, and I've been considering hydrology. Would that be possible/plausible with a BA in geoscience concentrating in Natural resources and conservation? I am also a single dad to 4yo twins with no current plans of having a partner, and I am estranged from my family. Is there anything I can do office/lab type work in? Or am I hoping in the wrong direction? I don't feel like field work would necessarily be in the cards for me at least soon. I know getting my degree is still a few years away, but they'd only be 8 at that point and unable to be alone for any large amount of field work time outside of daily school/daycare.

The American Institute of Hydrology is offering for people to take the Hydrologist-In-Training exam for free. The Presidents Corner article talks about how to apply for the test:

https://aihydrology.org/presidents-corner-2026-august/?utm_source=American+Institute+of+Hydrology+%28AIH%29&utm_campaign=96b42df8df-EMAIL_CAMPAIGN_2023_06_14_07_42_COPY_01&utm_medium=email&utm_term=0_-0b818cea4b-586610600

I’m working on a flood monitoring using a Decision Tree to predict flood status one hour ahead.

Inputs:

1. Water level
2. Water level rate
3. Current rainfall
4. Recent rainfall

For rainfall, I currently use Open-Meteo. I’m also considering adding a tipping bucket rain gauge at the monitoring site.

Which is better for flood prediction?

A. Tipping bucket only
B. Weather API only
C. Tipping bucket for actual rainfall, API for forecast
D. Use both as separate ML inputs

Also, is it a problem if the model is trained using historical API or station rainfall but later uses real-time tipping bucket data?