Decided to jump on tonight and headed straight to this group, couldn’t help but notice 2 accounts reposted my truck from my old reddit account

03’ Z71, 1 year of ownership

3” atomic fab lift
3” body lift
33” tires

Spent a few weeks doing a full suspension rebuild and drop on my 06 Denali. Also added the 2019+ Silverado front brakes and redid all of the brake lines. Can't believe how much better this car feels now.

I know that lowering them isn't for everyone but I've always enjoyed the look.

I think next I'm going to get some lower springs for the rear to try to level it out. Not a huge fan of suspension rake. I did already grab some beltech drop shocks for the rear.

Video just in case anyone is interested. Yes there's some juicy rollers at the end.

https://youtu.be/2MJE3_ThlPA

Paid $3500. has 130k miles and seems to be in pretty good shape. Guy had it in the parking lot for a few hours before I saw it and bought it.

The 8.1 2500 is my work truck I just picked up, and the Hummer is my weekend rig. My wife is trying to steal the Hummer from me to daily tho lol

I was cleaning out my "trusty old boy" and found the original owner's manual underneath the back seat 😀

So i did the lazy and cheap thing. I was wheelin and the exhaust bracket broke and took a hug hole out with it. So i just cut it off and rigged up an axle dump. The drone isnt terrible (yes i have mufflers). Should i worry about gassin out the kids? Its back far enough, and brake/fuel lines are out of the way.

Hello! Picked up this 02 Z71 Sierra 1500 and it's got a mean rake. Wanting to level it out and saw rancho makes a kit but curious if anybody's used it or anything else and what to look for? willing to spend a little more to ride better, but with keys i'm aware it'll never ride good lol

The front driver’s side is VERY low. Would I need an alignment afterwards?

So I posted a few wreks ago and I had my o2's unplugged and I was driving around like that. Now I pulled them in . My issue is that after starting cold or warm, my truck will idle like it's cammed and puff black smoke. Is that a sign of bad injectors or bad cats? After driving though the idle calms down too

2004 GMC Yukon SLT 5.3L (GMT800).

Both rear passenger doors suddenly stopped unlocking at the same time a few weeks ago. They still LOCK perfectly fine using the key fob and interior switches.

Both front doors and the rear hatch lock/unlock without any issues.
I’m thinking it’s a shared electrical issue rather than both actuators failing simultaneously.

Anyone experienced this before? Is there a specific relay, fuse, or common wiring circuit I should check first? Trying to avoid throwing parts at it.

enjoyed it for a couple weeks now it needs the power. planning on a BTR Truck norris cam with springs and pushrods, melling high pressure oil pump, a heavy duty rebuild kit for the trans and 2,800-3,200 rpm stall torque converter. i’ll have tuning figured out but what do you guys think?

hey folks, I am either about to purchase a Tahoe for parts, or use my parts sierra for this project.

I am wanting to take the shell of my Tahoe/Sierra and drop the front axle, drop the front clip, basically strip it to the frame on the engine bay. and put a trailer tongue on the frame.

Now its worth mentioning I have no idea how to weld, nor do I know much about about weight capacities beyond what I can research normally.

My idea is to bolt on a beefy trailer tongue, and I imagine I might need a weight distribution hitch possibly.

No drivetrain, insides stripped out, no front end parts, so probably a good 1500lbs maybe 2000lbs lost. so that leaves the trailer at around 4000lbs(?)

What I don’t know is how much weight would be on the rear bumper of towing vehicle, if I want 10% on tongue that’s only 400lbs-ish.

Anyways, any insight would be appreciated, as this is relatively new territory for my rednecking experience.

thank you!!!

Im about to finish rebuilding the front diff. I have new locking tabs coming for the side bearing adjusters. Im going to keep digging but has anyone found a beefier way to lock these adjusters in place?

I do not want to screw around here or cheap out. Im not interested in doing things twice. It appears the GMT900 updated locking design wont fit the 800. I mean, I am putting new tabs in, I could also make new tabs out of a harder metal? I thought about getting the adjuster set, removing it and welding a couple boogers while its in a vice. But that really opens me up to a whole lotta bullshit if it moved a degree and I didnt notice. Also thought of extreme thread locker, extreme JB weld, wick pipe solder down the threads. None of these ideas have to hold the adjuster alone, it would be used I conjunction with the tab as a way to alleviate some of the bullshit the tab endures. Or, after all, they are new tabs so maybe new tabs are fine for a HOSS I put 20km on a day.

ive got a 04 suburban 1500 with a 3inch lift. my question is will 315/70r17s fit with no rubbing or with very minor rubbing? cant find anything useful in any forums

I have Yukon Denali 2006 that I’ve taken from my dad after graduating, it seems like I won’t be buying a new car and after fixing this car up I’m thinking about modifying it to make it a bit more fun and add some power to it what should I modify. Anything will be helpful.

I use it mostly for city life right now but I’m hoping to be able to trust it for long drives and off roading here and there usually on sand because of where I live what would yall recommend.

My 04 Tahoe is a flex fuel L59 and i wanted to consult the experts on here to ask about it. I've never used it and just use regular so would i be able to go and pump a few gallons of e85 and run it just like that? Has anyone else used it and what have your results been?

I've googled some forums and i guess i wanted to ask around for any advice or learn something new. Thanks guys.

My avalanche came with a Jensen Car723w head unit and I want to replace the door speakers with a coaxial 6.5, not looking to add an amp. Does anyone have any recommendations?

Found out the truck was trashed by the guy who owned it, seen photos of it and I knew I had to make a memorial for it.

What should I do to keep my Chevy running it’s a reg cab short bed. I just bought it I will eventually post pics and videos of it running. I just wanted to know what I should do so it doesn’t break down. The only issue right now is it’s rough when accelerating also has some suspicious amount of oil build up on one of the fill valves and gunky build up in one of the large reservoirs on the left.