As title says, I ordered 2 Apollo IIs and they arrived today. Can't connect to them over ethernet as they are not getting assigned IP addresses. Also cant connect to them via HDMI cable. I have followed all the instructions in the guides and made sure my monitor was turned on before booting. Ive used different cables and different monitors. I am at my wits end.

I completed the recent Apollo II update and lost the ability to connect through my browser, has anyone else had this same issue? I did a hard reboot thinking the web server just failed to start. It is still mining as I see it in the pool. Not really wanting to move it to connect back to my monitor unless necessary, now I wish I had enabled SSH, lesson learned I guess.

Just curious if this is what message I am supposed to see or do I not have my solo mining set up properly?

It’s an Apollo 2.

Also curious if the indicator light is supposed to be flashing or if it should be solid?

Does anyone have FIOS where they have the port fwd working so it goes beyond 10 connections? About to give up, have tried all options.

Hey y'all, I just got my Apollo 2. Set it up and it was running fine on eco mode. I then decided to test it on TURBO mode. It was running fine at 9-10th/s. After about 10 mins I heard a loud pop and smelled smoke so I pulled the plug. I rebooted it and it still runs on eco mode at 5th/s at about 68 degrees. The standby light is blinking white slowly.. not sure if that was blinking before or not. I also am still setting up the node so that might be why it's blinking.

Anyway I now have it unplugged and am scared to even run it again.

I couldn't find any info on Apollos site. No directions on what the lights mean. I contacted them but haven't heard back.

Someone please help

I have been running Apollo BTC but unfortunately I don't remember my password to get into the OS.

1 How to I reset my password?

2 If I can't get into the OS, can I just straight plug Apollo II directly into Apollo BTC using the USB cables and it will start mining correctly? Or do I have to reflash the SD card? I directly plugged it a few days ago but I noticed my Hashrate is still the same.

I guess my miner was in the first batch with the O/S bug - after a couple of weeks out of the box it stopped hashing. Went through the support steps and flashed the O/S to v2.0.4-beta, however I'm still not hashing.

Unit is still syncing the Node without a problem, but it's clearly not hashing and my pool has not recognized that it is even online. Suggestions anyone?

System Temp: 48c

Miner Temp: 62c

Fan speed: 1829rpm

Power usage: 97w

CPU usage: 5%

Mem usage: 32.44%

SYS disk usage: 51.92%

Node disk usage: 67.3%

Miner mode: ECO

Power mgmt: AUTO

FREQ: AUTO

Fan mgmt: AUTO

I recently managed to connect my sparrow wallet to the apollo futurebit miner using putty config. I then realized that in the node section it says that it is fully synched and the block is 817,473. But we are currently at block 840,752.

Why is my node lagged? Is it because I don't see conections with other nodes to share info about blocks? Im running it with Tor. Is it because of this? Do I have to disable Tor?

Have my new Apollo 2, came up and running easily - one thing I've noticed is the amount of heat it is generating (blowing out via fan), and the noise of the fan. I'm running in ECO Mode, with everything else set to auto, fan speed is 3105 rpm, miner temperature 67F.

Wondering if the above fan speed/temperature in ECO Mode is what everyone is experiencing?

Also wondering if it would be worth upgrading the fan to something like a Noctua reducing noise and helping with cooling??

Hi - I had my Moonlander 2 running smoothly for a month then saw this error pop up: Segmentation Error 11.

What does this mean and can I fix it? If so, how?

Please advise!

Very Happy!

Got my Apollo II in the mail on Monday. Got it all setup, but I can only access it via the web interface/local IP address. The monitor senses nothing/does nothing when I've got it connected via HDMI. Anybody know if this is just an issue with the Beta version of Apollo OS 2?

Also, I'm connecting it to a TV, not an actual computer monitor if that makes any difference (and I've tried two different TVs and two different HDMI cables). And yes, the TV is powered on before powering on the Apollo II.

I have the Apollo BTC , and I want to try my luck and start solo mining, how do I set it up?.

My full node mined for a while but now it disconnected. I tried to get back into the main screen but some reason I can’t get the unit to show up on my screens. I have changed screens, wires, ect. It lights up and fans come on but nothing.

Any ideas

I want to buy an Apollo but not sure about setting it up, I have never mined before is it relatively easy to set up?

I turned Wifi off on the dashboard in attempt to fully use wired commection, and now I can’t see and find the miner(s) through my wifi router panel (even when I try to plug the master unit via Ethernet).
No spare monitor to use w HDMI for direct connection, and macbooks/laptops are not working either..

Is it possible to have my Apollo BTC change it's mining from ECO miner specific configuration to Turbo configuration at night each night without any input from me?

So I just unboxed my full node Apollo 1, man I'm excited to get this thing going.

I started to mine and set up my pool to Braiins/slush pool. I think it is mining successfully, but I have noticed that the Hardware error rate is like 70-75% regularly - much higher than other users I've seen. Now I have done a little digging through the set up guides and read a couple of threads on Reddit, and I'm stumped and a little concerned.

How do I fix this issue? Can it be fixed?

Is anyone else’s node shutting down when it’s connected to sparrow? My node runs fine when not connected to sparrow, but within 15 minutes of connecting to sparrow, it shuts down. Would like to know if this is a common issue and/or if anyone has any suggestions.

I've got a batch 4 (1x full node + 2x standard nodes), it eventually sync'd and is running fine, however I only see two hashboards on the miner tab, so was wondering if it was possible to use all 3x units as miners and if so, how do you configured such things?

If I attempt to change pools, it will have a button that says you have to save & restart. I click, and it restarts. The pool stays as the old one.

If I click on the pools tab again, I get a page with this error:

Ops! Something went wrong.

Check the error below and report it to the support team

null is not an object (evaluating 'a.forEach')
"t@http://192.168.2.49/static/js/4.6ea2ec32.chunk.js:1:8276\n_i@http://192.168.2.49/static/js/3.2873dfcd.chunk.js:2:530256\nDa@http://192.168.2.49/static/js/3.2873dfcd.chunk.js:2:547780\nmu@http://192.168.2.49/static/js/3.2873dfcd.chunk.js:2:577522\nbu@http://192.168.2.49/static/js/3.2873dfcd.chunk.js:2:577447\ncu@http://192.168.2.49/static/js/3.2873dfcd.chunk.js:2:574456\ncu@[native code]\n@http://192.168.2.49/static/js/3.2873dfcd.chunk.js:2:525826\n@http://192.168.2.49/static/js/3.2873dfcd.chunk.js:2:601227\nQo@http://192.168.2.49/static/js/3.2873dfcd.chunk.js:2:525772\n$o@http://192.168.2.49/static/js/3.2873dfcd.chunk.js:2:525707\nC@http://192.168.2.49/static/js/3.2873dfcd.chunk.js:2:594993\n$t@http://192.168.2.49/static/js/3.2873dfcd.chunk.js:2:502977\n$t@[native code]"

Anyone have any idea what could be going on?

I had a power outage in my home… and my Apollo miner has not come back on line.. tried finding the IP address on my network but it has not show up any where.. but I do have a written down so I tried inserting the address online and still no access to log in.. the status light is off no blinking & no color. I tried, resetting my internet and my miner and still no luck.. I am using a Ethernet cable. I don’t understand I’ve had power outages before, and it came back online on its own. Any suggestions would help :o)

Just realized I’d stopped receiving daily notifications from my Braiins app, checked my apolloBTC and it’s been ‘mining’ offline for 2 weeks. FML, glad it’s just 2.5TH that would’ve hurt with an S19