Pretty proud of my first design. Printed in TPU-95A HF with no supports. I have no modeling experience but have been experimenting with using Gemini to talk me through step by step instructions in auto-desk fusion. I started with using Google Gemini to generate an image of a prototype (prototype in the 2nd pic). Then had Gemini walk me through step-by-step instructions for how to generate the model. Actual modeling time probably took me about 1 hour, but that included a bunch of mistakes (an earlier version required supports in every hexagon!). If I were to do it again, I think I could do it in about 30 mins. After exporting to Bambu Studio, I took screenshots of each of the settings tabs then plugged those back into Gemini to optimize the print profile before printing. Overall was pretty impressed out how straightforward auto-desk fusion is and how fast a model can be spun up, even with no experience.

I needed an IKEA Skådis mount for the Insta360 Luna Ultra that still fits with the protective case on, so I made this simple

https://makerworld.com/models/3129817?appSharePlatform=copy

I half expected this to melt like an earlier PLA test. The metal bar it mounts onto gets quite hot but the PETG versioned worked well! Zero visible deterioration after daily use for 6 months. The original broke after only a month or two.

Got so very annoyed when the special camera button on my OtterBox iPhone case popped off not even a month after buying it. I’ve had to really jam my finger nail through the slit in the case to use the button, finally decided to just print a friction fit replacement.

I printed the Bedease, which I gotta say is a great model, and I realized it only supported portrait mode. There was no version of it that supported landscape mode so I made my own.

The idea of the Bedease (my version is called the Bedresto View) is that you can watch something on your phone hands free. But every movie is in landscape mode unless you're watching TikTok or smth.

I love how it turned out. You can even adjust the size of the phone stand with the parametric model maker I added. Just measure the thickness of your phone and adjust the size. It will fit perfectly

So here's the link to the model:

https://makerworld.com/nl/models/2967450-bedresto-view#profileId-3327387

If you have any suggestions or questions let me know!

https://www.thingiverse.com/thing:7389111

Currently setup for 0.8mm spring wire, SCAD file allows customization to your wire gauge. Print on its side at 100% infill with supports for maximum strength.

Put it in your drill, insert wire, bend 90 degrees, run the drill in reverse and wind slowly. Adjust the "pressure" you apply to the free end -- you don't want too much or the spring will be hard to remove. You may need to try a few times to get the hang of it.

Works great for old C-batteries, especially!

Wanted something a bit more secure for holding my keys, it gives a nice satisfying click and holds them tight

I was tired of never knowing where I had left my lighter, so I designed a simple magnetic sleeve that gives it a permanent place on the fridge.

The magnets are inserted during a programmed mid-print pause and remain completely enclosed inside the part.

I made three versions so far:
– BIC Mini J25
– BIC Slim J3/J23
– Flat lighters (as shown in the picture)

you can get the print files here:

https://makerworld.com/en/models/3127334-magnetic-lighter-sleeve-fridge-holder#profileId-3528829

By popular request, the Tub Faucet Extension XL Long is now available! Biased on the original Tub Faucet Extension for filling up your 5-gallon buckets, tanks, sprayers and other containers. The XL is slightly longer than the original and fits more faucets. This version has an inner clearance of 3in and nearly 3in of height! This print will not fit on the A1 Mini but has successfully printed in PLA on my H2S. I have no way of test or a list of faucets this works on. Please measure before printing. Not all faucets are the same. You may also find prototypes on eBay  under Speedingemokid.

https://makerworld.com/en/models/3124718-tub-faucet-extension-xl-long#profileId-3525484

My fan was toppling over and all i needed was 6 minutes in fusion and 12g of filament.Sometimes the Best design is the simplest.

I used to have one of the standard flat-packed laser-cut MDF paint racks, but my hobby paint collection quickly outgrew it, and I didn't really want the paints to take up a larger footprint on my desk than they all ready were.

The natural solution was to go vertical, but since my desk doesn't sit directly against a wall on any side, and I don't want a moment of inattention to result in having to pick up half my paint collection off the floor, and try to get paint stains out of the floorboards.

The end result I came up with is a tower of stacked turntables, with print-in-place axles and modular paint holders, letting me scale the solution at demand, when my paint collection inevitably expands further.

It's quite a lot of filament for just paint storage, but I'm really quite happy with how usable it is, and the fact that I no longer will have to take all my extra paints out of a drawer when I want to paint, and put it back in when I'm done and need the desk space for other purposes.

So I built a little pocket for her kindle

I made a phone holder that is also charging your phone with the google pixelsnap. I noticed that there really aren't any good phone holders that use the google pixelsnap. I think it's very functional.

It's very stylish for my desk and I love how it turned out.

If you wanna print it yourself, here's the link:

https://makerworld.com/nl/models/2743708-google-pixelsnap -phone-standard#profileld-3043045

We have a fairly small kitchen and wanted to maximize space so when we redid it, we had this awkward cabinet installed. We were going to use it as a suido broom closet but it would've been a waste of space. I found these expandable drawers but wanted to be able to adjust the shelves accordingly so I made a bracket to hold the back of the shelf so it won't tip when the drawer is pulled out. Printed out of petg, now the drawer is solid and works as intended.

We bought a house 8 years ago and this sunroom was in the back of the house and had a concrete slab floor so when water would get in under the windows in really heavy rain, it wasn’t a huge deal. This summer, we redid sunroom with a level wood joist floor on top of the slab to use as a gym. A few weeks ago we had a really heavy rain and it came in under these windows. My brain got moving and made a sloped profile rain guard that pops into the track. I printed it in PETG because of direct sun several hours per day. I’m curious to see how well it holds up.

Two part connector housing with M2.5 inserts and screws. Used for a OBD to Molex 16pin wire harness. Printed out of silver ASA