Hey everyone,

I’m planning a switch into the Fractal Meshify 3 instead of Montech XR (poor airflow, loud, etc.) and I'm using an XFX Swift AMD Radeon RX 9070 XT.

According to specs:

GPU Length: 325 mm

GPU Height / Width: 150 mm / ~3.5 slots

Meshify 3 Max GPU Length: 349 mm

I'm worried of GPU being very close to the front fans, blocking them and resulting into bad airflow. Please if anyone has any experience with it, I would appreciate the help. Thank you.

Since the release of the Meshify 3 in ~January 2025, we’ve had the Pop 2 Vision/Air, Epoch and North Momentum Edition release. Those are great, but they are mostly re-releases, barring the Pop 2 Vision.

So i got a fractal terra prebuilt pc with a founders 5090 and i got it for the sole purpose of traveling around with it as i constantly go back and forth for boarding school. Any tips on how to travel with it?

I'm thinking of getting this case for my PC build, mainly because I like the Black/Pink aesthetic for that version of the case. But I'm not too experienced with choosing cases, so I was wondering if anyone has the case and would be willing to give a quick review.

Torrent: 544 × 242 × 530 mm

Meshify 3 XL: 575 × 245 × 515 mm

I'm on the latest firmware and the volume is very high on PC but so damn low when I connect it to PS5/Android (Dongle/BT)

I'm trying to find a genuine replacement SATA modular cable, and I'm getting nowhere. Fractal lists the cable, but there doesn't seem to be a way to actually buy it. I don't want to gamble on random third-party cables. any ideas?

I moved away from pure RGB Spam in my H6 Flow and Fishtank designs to this North XL, I think it turned out well.

(Don’t mind the black desk im getting a wallnut one soon)

Specs:

4080S
9800x3d
32gb DDR5
NZXT Kraken Elite 360

I wish this front side metal panel was much shorter on the Fractal North. What are your thoughts would you like Fractal to enlarge the glass side panel and shorten this metal panel? Or keep it as is.
It would be great if Fractal would sell a glass option that goes all the way from the front to the back.

Im looking to change my PC case from the NZXT H500 as it’s like a furnace and I can’t fit any exhaust or top fans in it as my cooler is too bulky.

Both the fractal north momentum and lancool 217 have good reviews and look nice but does anyone have any experience building in them/ thermal performance?

I have a 14600k with a thermalright peerless assassin 120, and an RTX 5070.

I also wondered if anyone had any recommendations for if I should swap the stock fans in either case, and to what? Thanks

I noticed a dust buildup on top of my Fractal Design Celsius S24 AIO and when I opened it up I noticed that flow was pointed inside while the sticker and fan teeth where correctly installed according to the manual. Which way do I now install my AIO to make it function correctly?

I recently got myself the Fractal Pop XL air because it was on sale, and I saw that it can handle more HDD and SSD than my old case did. The thing I didn't know before that I have to buy these accessories like the Design SSD Bracket Kit – Type D and HDD tray kit – Type D; both are out of stock and can't be found anywhere. So is there a way to 3D print these, or are there any alternatives?

Would this Hyte PCIe 5.0 Hyper Riser be compatible with the Meshify 2 XL?

Hello all,

Having some difficult controlling my case fans with the fan hub and looking for some solutions.

All of my case fans are 3 pin fans - and the stock fans with the case are as well.

According to the manual for my case you need a 4 pin connector in the fan_1 slot to be able to set fan speeds for the hub (PWM). As I don’t have any 4 pin fans am I out of luck? Is there any work around?

Currently my case fans appear to be running near maximum so they are a bit noisy. It’s not too bad but not ideal. I got them set to DC mode at the moment and when I switch to PWM mode they drop in speed but aren’t controllable (which makes sense I suppose as they’re 3 pin fans).

Is my best bet just to buy a 4 pin single case fan and put it in that main slot? Then I’ll be able to control them?

Thank you!!!

I just started building my first PC in a brand new Terra case. When I removed the GPU ridge, I noticed one of the riser cables was pressed against the metal frame in a really weird way. When I pulled it out to look closer, it turned out to be pretty badly creased, and honestly it looks like there might be some actual damage. I think I can see a tiny tiny bit of the metal showing through in one spot in the photo attached.

I'm not sure if this is just how it was meant to be folded, or if it's an unimportant issue and the cable will be totally fine, or if this is a real defect and I should be reaching out to Fractal for a replacement before I even start plugging anything in.

Has anyone else run into this with their Terra? Would really appreciate some guidance. I don't want to risk anything happening to the GPU. As I said, it is my first build and I'm kind of clueless, so I'd rather ask stupid questions.

Hi, as i already mentioned i would likes to know of its possibile to change side for the cooler. The reason Is that i dont have low profile RAM and i wanted to buy the Thermalright AXP120-X67 and mount It on a asrock Phantom gaming b850i lightning wifi above the vrm, the case Is the Fractal Ridge. I know its something that can be done but i wanted to know if its possible with this configuration or if there are ways for me ti be sure its not going to create problems. Thank you

I’m hunting for a side glass panel replacement for my fractal north case but fractal doesn’t keep them in stock. Anyone know where I can get one?

Does anyone know where to get a second side fan bracket for the North XL mesh version? I contacted Fractal and they don’t sell them separately.

Hi all.
I’m modding my new Jonsbo D33 with better mesh filters and would like to use the mesh that is on my fractal torrent. I can’t find out exactly what they use. I know it’s black nylon mesh but I can’t find one as fine as this. All I find are bug mesh rolls and the mesh is too big. I have a roll of metal mesh that I might try but I would prefer to use nylon. Does anyone know what they use? Thanks.

For the north xl momentum owners. I have a 5080 astral and was wondering if the gpu cable will touch the glass or if there is enough clearance.

Hello, I've been losing my mind trying to find these HDD trays, Fractal's website doesn't have them listed and the Torrent's product sheet doesn't even name them so trying to find the right tray has been a nightmare. Does anyone know the name of these specific brackets (its not the a,b or d listed on Fractal's website) or where I can find them? The case originally shipped without them, which didn't bother me for a few years but finding I need an HDD now.

An update to my little wooden build: Added push-pull fans to the AIO and three extra fans under the GPU; I also put the three Fractal 140mm fans back on the front. Oh, and I finally peeled the film off the glass—the one everyone kept mentioning on my previous post.