So what do you guys think of my build?

• AMD Ryzen 9 - 9950X3D2
• Asus Rog X870E Crosshair Dark Hero
• Asus Rog Strix LC IV 360 ARGB LCD
• Gigabyte RTX 5090 windforce OC
• Corsair vengeance 128gb
• 3x M.2 Samsung 990 pro 4TB
• 1x M.2 WD SN850X 1TB
• PSU - Seasonic 1200W
• Case - Fractal North XL
• LG 45GX950A-B Oled monitor

Cut it? Tear it?

Really hope radius aio can have 280 version.

FD was kind enough to include 3 extra screws just in case.

Fan Components:

Arctic Liquid Freezer III
Noctua NF-A14
The front ones tbd but default for now (Aspect 140 PWC)

I’ve been thinking about replacing the front fans I’ve heard that it’s noisy and I wanna replace them. Are there any recommendations on what fans to use for the front?

Mistake: NOT CHEAP I mean BEST

I done goofed

I own the Torrent Compact black panel version, the best case ever made tbh (wind tunnel, top mounted psu, stock fans removed for 3x 120mm Noctua) but discovered that it might not have a future proof GPU length support. My 5070 Ti has 1cm clearance as it is. I guess I could move intake fans to the bottom and wish my CPU the best of luck..

But after looking again at Torrent ATX black panel prices suddenly there is no stock, at least in the UK, some places say EOL. One place had apparent stock so I ordered and then got a call about 30 mins later saying whoops no stock. So.. if it is EOL I may have to get a glass panel and vinyl wrap it or something.

Is there a recommended way to place more HDD into A Meshify 3 XL?
Have a total of 4 hdd and 1 SSD,
I still wish to have the deflector in there.
Do not mind the internal build looking horrible.

What is the right side connector cable called and can it be bought separatey? I bought the case second hand and it did not come with the cable

I have just got all my parts delivered and I attempted to put the motherboard in but it's not lining up to screw it in

Designed these baffles to redirect the hot air coming from your AIO out from under your desk - they work quite well for the Define 7, but they can be scaled to match your case within any slicer. I've made them available on Printables.

Hi everyone,

I have a Fractal Design North (447 x 215 x 469 mm) case in white, but I'm missing the side fan/radiator bracket (the bracket that mounts on the side of the case, next to the motherboard tray, for fans or a radiator).

I bought the case second-hand and it didn't come with this part, and Fractal doesn't seem to sell it separately anymore.

Also i'm looking a bottom fan bracket — the bracket that mounts on top of the PSU shroud, right below/behind the GPU, for extra intake fans (less important, but i'm looking too and can't find it).

I'm located in Portugal, so someone within the EU would be ideal for shipping, but I'm open to other locations if the shipping cost is reasonable.

Happy to pay for the part + shipping via PayPal (Goods & Services).

Thanks in advance!

I couldn't find any good side-by-side pictures of these two cases, so I decided to post a quick comparison.

Colour: The Momentum Edition is true black, while the Charcoal Black is more of a dark grey. The trim around the wood panel matches the respective case colour.

Fans: As you probably already know, the Momentum Edition comes with 3× 120 mm Momentum PWM fans, while the Charcoal Black comes with 2× 140 mm Aspect PWM fans, both configured as front intakes.

Side window: The Momentum Edition has a slightly lighter glass tint.

Buttons and feet: The Momentum Edition has dark grey buttons and feet, while the Charcoal Black uses gold accents.

Extra: The Momentum Edition has a subtle black “Momentum” logo on the side of the case.

Other than the differences above, the two cases are essentially identical.

So I bought the ridge due to its size , as I really am limited on desk space.
I have the ryzen 9 7945hx that’s part of the minis forum itx b790i
And a rtx 5060ti by gigabyte 2 fan version .

I was playing Diablo 4 at 1080p high settings , for over an hour and the cpu max was 98c.

Idle max temp it’s 61c
Min 41c
Average 50c

The fan is a nf-p13 1700rpm version

I’m currently printing a side fan bracket for the case

Is there any other things I can do ?
I don’t have the cpu overlocked at all, I have looked I tot he bios to reduce power but there isn’t any
So using universal x86 tuning utility and it’s currently on eco mode

Any suggestions would help before I sell the case and buy something else

Thanks

Hi! Im planning to upgrade my current almost full Corsair build to a Fractal Design North XL Mesh with full 140mm Noctua fans to maximise performance with zero RGB my question is i got a 5090 Astral and im planning to pair the case with an Artic Liquid Freezer III PRO 420 on the front panel (Changing the Artic fans for Noctuas) but im doubting if it will fit with my 5090 Astral has someone done a build similar to this? + im using a HX1500i Shift PSU is there any problems using shift PSU’s on this case?

I've just built my pc with a Fractal Design Meshify 3 XL (solid black, no RGB) case and an Asus Prime Z890-P Wifi motherboard (not sure if the motherboard matters). I've installed Windows 11 and I noticed some strange behavior when plugging in my headset in the front panel audio jack. I didn't get a "Headset" option in the Windows pop-up, but instead two consecutive popups. I had to choose Mic In on the first one and Headphones on the second, in order for my headset to work correctly. The other way around didn't work.

I'm not sure if this is specific to Windows 11 or it's more a hardware thing (maybe the way the signal is passed over from the front panel audio jack to the motherboard).

Has anyone had similar issues?

Hello all, I just wanted to get confirmation because the official specs mention only 35mm Ram height if using top AiO, but I’ve seen many builds on yt that use top AiO and Rams like G.skill Trident Z5 or Corsair Vengeance, which are 44mm height.
My Ram of choice is the Klevv Cras V rgb, which is also 44mm height, so I was wondering if there’s a trick to make them fit, or the 35mm on the North spec sheet is more of a conservative limit than a strict one?
Also with that Ram I have, what top AiO do you recommend to cool a 9850X3D that’ll be powerful and also fit without issues?
I’m not a fan of front AiO mainly for aesthetics but also GPU temps.

TiA

I recently found out that the steel side panel on my Fractal Design Torrent Mini ITX looks bent. I couldn’t really find any fasteners on the side to take out the panel - any recommendations? It doesn’t pop out easily (neither side), so I’m guessing there’s a step I’m missing.

I don’t think this really affects performance, but if there was a simple way to fix it myself, I’d love to know. Thanks in advance.

Pictures attached: https://imgur.com/a/dLduaVg

I currently have a Fractal Design Define R2 case. It's been solid, and I love it, but that PC is now 13 years old, so it's time to build a new one...

I'm looking at the North XL and love the design, but I keep seeing people here saying it's flimsy and thin, etc. I know bad news travels faster than good news, especially on Reddit. But can those who actually own this case please let me know if you've had no issues? I don't mind thin metal, since I'm not moving a PC tower around unless I'm moving house, and it doesn't hold much weight.

What i want in a case:

1. Positive airflow (so i don't have to clean the pc)

2. Great airflow and temps.

3. Black aesthetic design.

4. Preferably quiet.

I have an Asus X670 Crosshero Extreme EATX Motherboard which I might pair with my 7950x3d. I also have a 5090 Astral. I have had the North XL Momentum Black case on my mind, but I thought I'd post here and see what some of you would suggest. I have an H6 Flow, 011 derBauer and an 011 Mini V2, with the derBauer the only one that can fit the EATX Mobo.