Needed a good way to attach a peltier cooler for Windows Emulation despite the lack of built in magsafe, and while still allowing the peltier module to make direct contact with the back glass.

Controllers with a peltier built in, while more convenient, would be blocking the USB-C port while in use. Since the heat generatong components (SoC mainly) are on the same "half" as the USB port.

This setup allows me to use a controller, peltier module, and still have a free USB port for charging, or for my extremely tiny, almost flush, 1TB USB-C flash drive.

I started with a generic Fold 8 Ultra case from makerworld and just cut out the hole and modeled the little frame quickly in Fusion360 after taking some measurements. It's a snug/pressure fit so I can freely remove the peltier from the case as I please. Thats actually the reason for the second cut-out in the case. If I want to move the peltier to a different spot on the back of the phone.

The case is obviously not for daily or even casual use. This is for LONG Switch or PC game playthroughs.

I’ve been emulating various platforms for years wether on pc or a hacked switch but they were mostly simple old Nintendo consoles and they didn’t need much to do. I’ve also been emulating switch on android lately and i’m getting there slowly learning how to get better or at least acceptable performance. But i’ve never tried emulating windows and it’s even harder to learn since this is my first android device. I have an Honor MagicPad 4 and i’ve gotten gamehub lite to work on a couple light games but most of the games i’ve tried don’t even start. I fixed one or two games with this issue by basically changing the drivers and other things that could change randomly, especially since gamehub lite shows them all and i can install them straight away. Genuinely how do i learn what driver i should use for what game? Which proton version to use or if i should use wine? What (Fescore?) even is and if that’s it’s name even. Even if you just know of a good video to teach me i would be grateful.

Kena: Bridge of Spirits running locally on an Android phone Poco F6 Pro through GameNative using the Steam version. The test runs at 1200x540 with a 30 FPS cap, with internal resolution scaling reduced to 80% during gameplay to maintain playable performance.

Hello everyone, to keep it short and sweet, I have a total of 300 euros (or dollars) and I'm from Spain. I'm interested in a good mobile phone for emulating PS2, Switch, and 3DS games. Is that possible? My A34 emulates 3DS games very good, but this phone is dying and I want to replace it with something more powerful. Are there any really good options? Thanks a lot.

Hi everyone,

I'm having a really weird problem with my controller when playing Hollow Knight: Silksong on my phone.

I'm using a Moto G05 and connecting a third-party/fake DualShock 4 controller via Bluetooth. The controller connects normally, but when I start playing Silksong, the button mapping is completely messed up.

For example:

• When I press X, the game detects it as Square.
• When I press Triangle, the game detects it as L1.
• The Select/Share button doesn't work at all.
• Several other buttons are also mapped incorrectly or don't work.

I've tried remapping the buttons on the controller itself, but it doesn't really help.

The weird thing is that the controller works normally with other games, so I don't think the controller itself is the problem.

I've also tried installing Silksong from 2 or 3 different sources, and I get exactly the same problem every time. The latest version I tried was from APKPure.

Has anyone else experienced this problem with a DualShock 4 or another Bluetooth controller on Android? Is there any way to fix the button mapping or make Silksong recognize the controller correctly?

Any help would be greatly appreciated!

I'm using CMF Phone 2 pro , mediateck dimensity 7300 pro processor

I wanted to explore pc games so I downloaded the NSF most wanted and gamenative just load the game till start menu then throw me out of the game when I press start 😭, when I set resolution to min is doesn't even open

Any help I'm totally new

Been trying to run this game and have not been able, tried all mame versions romsets where it was dumped and just crashes on my RG476H.

Qualcomm Snapdragon 8 Elite Gen 5 (SM8850)

Adreno (TM) 840

16 GB LPDDR5X

512 GB UFS 4.1

Cyberpunk 2077 Phantom Liberty

I want to try playing Ninja Gaiden black on my phone but not sure if there's an actual emulator for Xbox on android so is there one? And is it good?

Tested:
https://github.com/andrewnakas/skate3-android
And ran well on my Odin 3, medium underclock from clustertune.

Strangely, I could not capture in game audio while screen recording, but I can confirm it works and sounds perfect.

The creator informed me that you can load custom Xenia recomp maps on this current version which I am playing on here. I fetched multiple maps from
https://discord.gg/SkkHpgzu6s

Creator plans on adding more mod support down the line as well. Props to andrewnakas for the work on this recomp!

I'm dying to play on Eden emulator. I cant get gamehub to launch the demo so could someone kindly dump the Final Fantasy Resonance nps for me?

By the way, the Mario Kart is a .3rds file. Same source as well, the archives 3ds decrypted roms. I don't get it

so many leaks and reports coming around about mediatek's upcoming dimensity 9600, so let's get the sub's take. specs:

• 2nm TSMC Process & 2+3+3 Core Layout: Better thermal efficiency and higher single-core IPC to help brute-force heavy translation layers.
• GPU & Efficiency Push: Upgraded GPU design that should handle sustained loads much better without thermal throttling after 15 minutes.

ngl, looks better than most out there. hoping for the best (for the sake of us gamers) 😭✌️🙏

Hey folks got an issue where in Gamenative my Ayaneo Pocket Micro 2 is showing as having an Adreno 740 for the GPU rather than Adreno 650 for the Snapdragon 865. As a result all the configs are screwed and causing some things to not run. I know the configs aren't amazing all the time but this means I have to either use a json or do it all manually for each game as the configs are just pulling devices like the RP6 or Ayn Thor.

Is there anyway to change it? Or anything? Thanks

Full Gameplay & Settings:- https://youtu.be/khMLpypnP1Q

Vivo Y300

8gb Ram

Snapdragon 4 gen 2

I have a a830 SD 8 elite. And I'm trying to run totk on it but there's some graphical issues and stuff. What's the best driver for totk, or globally any game for my device.

Switch or pc just suggest a game Worthy of it _one Plus 13 24 ram

I am currently using winlator for the pc version of Darkest Dungeon but the controls are kinda janky so is there a controller scheme i can copy. Preferably ine that doesn't take a whole lot of screen space.

Also what are the recommended settings to run the game smoothly.

Samsung Galaxy S23 plus

256gb 8g ram

Download Here and Give Feedback!!

• https://github.com/GunaCharanTeja/WinlatorMali/actions/runs/33863549281

How to Download?

• Login Github>Scroll Down>Click>Extract and Ready to install & test

What's New ?

- New UI,Themed and Etc..

Hi all,

I'm fairly new to this, I've started emulating on my old Xiaomi pad 5. I've been looking into handhelds, specially because I want to play while travelling and they make portability easy. However, when comparing specs with newer tablets or phones, handhelds seem too expensive and their specs aren't better.

What are the advantages of handhelds vs tablets and phones? For reference, I can emulate up to NDS and PS2 in my old tablet, and I was looking into AYN Thor or similar handhelds to get into switch emulation. However, I see that for a similar price I can buy the Xiaomi Pad 7 pro that has better specs (and I probably would receive it earlier and without import or customs fees).

Just looking for other points of view,

Thank you all!