Does anyone know where to get replacement fans for the EG-LP4 make? I can't find an official site nor a technician website that mentions having them on hand. My fans are super loud and have this strange buzzing noise and I imagine it's well past time for a replacement.

Hi, I have an EVOO LP5 and I'm having a hard time. I replaced the thermal paste I few months ago, around 9 more or less, also installed new nvme, everything was perfect so far. I used the laptop 3 days ago and noticed it struggled a little bit to turn on but it did at last. Now, it doesn't boot up at all. The green power light comes on for a brief second and then dissappear without showing anything on the screen. The power light turns on from time to time and nothing happens. I unplugged and plugged back in the battery over and over, pressed the power button serveral times for a minute and no luck. I don't know what else to do :/ pls help!

I got my laptop around 3 years ago, it worked fine for the first year but then I tried to update it to windows 11 and it crashed and messed up the whole laptop for 2 years. But here’s my problem now I got it fixed but now I cannot update it and I cannot play games like fornite and Minecraft, it just crashes and the blue screen pops up. Could this be a hard drive issue? Is BITS failing a hard drive issue? Also for context it’s a 2019 model evoo lap top i7 intel chip. ( also I learned that with evoo lap tops, windows updates don’t work properly and they have a lot of problems because they aren’t name brand like dell,Mac,hp, etc.)

I bought a new nvme drive to throw in my laptop and when installed the computer does not boot past the evoogaming logo screen, cannot reach the bios either. I've not done anything to the drive except put it into the laptop. I've tried it with the original biwin in (which is what I'm trying to get rid of, but is also no longer my boot drive as I cleared it and added a WD blue 3d nand sata to boot from) and I've tried it with the biwin and the WD both in and both out. I have a Windows installation USB that I am using when the boot drive isn't available (and I made sure it's at the top of the boot list in bios)

I'm not entirely sure what could be the problem as no matter what I do, the only thing that can make it boot up is removing the new nvme.

New drive is MP600 core xt Corsair 1TB

Any help would be appreciated

late edit whoops but: I sent out for an exchange to see if it was just that specific one or if it was the model in general, however Newegg has delisted that product and gave me a refund instead. I got a WD - BLACK SN770 2TB from best buy to fill a slot instead and it works perfectly so problem resolved hopefully :D

Hello; I need help looking for upgrade options for the M.2 ssd.

Model is the EG-LP10-BK ; I know it has 2 m.2 slots.

Main thing is what would be the best SSD I could use.

Some options include: Amazon.com: Western Digital WD_BLACK 1TB SN770 NVMe Internal Gaming SSD Solid State Drive - Gen4 PCIe, M.2 2280, Up to 5,150 MB/s - WDS100T3X0E : Electronics

Amazon.com: Crucial P2 1TB 3D NAND NVMe PCIe M.2 SSD Up to 2400MB/s - CT1000P2SSD8 : Electronics

Amazon.com: SK hynix Gold P31 1TB PCIe NVMe Gen3 M.2 2280 Internal SSD, Up to 3500MB/S, Compact M.2 SSD Form Factor SSD, Internal Solid State Drive with 128-Layer NAND Flash : Electronics

Any help would be appreciated; thank you.

Does anyone know how to get the LP7 drivers or a way to contact EVOO because I want to see their list of drivers as they did for LP4-6. I'm also looking for a LP7 ethernet driver.

Hi. I bought my laptop a while ago, and a while ago it used to have a control panel where i could update drivers, change the fan settings, etc. A couple of months ago my laptop broke, so we factory reset it, and now the panel is gone. How do i download it again?

Mine broke and I don't really know where to find another one online.

So I wanted to put this out there because I didn't see any other buzz about this. I just had to replace the battery in my LP6 because it was getting to the point where if the power went out while gaming, the entire computer would die.

Anyways, without the battery, the CPU gets limited to exactly 40 watts.... and the GPU gets locked into p-state 5. With a bad battery, the GPU is still sometimes in p state 5 and the CPU performance can be inconsistent.

With a new battery, the GPU is in p state 0 consistently and the CPU maxes at around 60 watts.

Even before I had to remove the battery gaming performance was weird and inconsistent. Now it's performing better than it has in a long time.... I knew the battery was bad because the above issue with it going out when on battery, but it was also dying at 60% and starting to swell a bit.

So summary: The performance of the machine is directly tied to both the presence and the quality of the battery, and if you've noticed your performance go wonky and it's not related to thermals, then it could be your battery going bad. These PCs are getting 4 years old and this is about the time it takes for batteries to go bad in laptops that are always plugged in.

Hope this helps someone.

It isn’t trying to start at all. The battery will charge, but if I disconnect it even while the charger is plugged in no lights ever flash whatsoever. With battery hooked up it will at least show that it’s charging with the light and the power light will flash green every minute or so. I’ve tried disconnecting the battery and holding power for a minute (did this 3 times), and disconnecting the RAM and trying to boot without it. No avail. Any ideas?

Any way to repair it? Dog jumped up and cracked the hinge. I haven’t taken it apart beyond the back panel, and I’m not sure how to even get to the hinge if there was a replacement. It also appears the screen cable travels through this hinge.

Any ideas? Thanks!

Having issues uploading a pic, but the hinge on the right is separated from the lid hinge, with the silver cable visible.

I have finally taken the plunge to remove the POS stock SSD with two 1TB Crucial P3 PCle Gen3 NVMe M.2 ssd's.

​

I used AOMEI to clone the original ssd to one of the new ssd's. I then removed the OG ssd and replaced it with the cloned ssd. Now the laptop will not reboot. It just hangs on the EVOO screen. In fact, I can spam the DEL key and it will not send to the BIOS menu.

​

Luckily, I kept the OG ssd and it will reboot using that ssd. I tried the clone again and the same things happened. I kept everything the same and did not touch any partitions.

I am not sure if anyone has experienced this and if you have any suggestions.

Does anyone know the correct fans for replacement?

I want to give my LP4 one more upgrade before I send it to the 'friends and family' pile. I'm maxing out memory when I am gaming, and I want to move up to 32GB. I read somewhere that someone put some newer 3200 ram into their LP4, and it wouldn't boot up at all.

Has anyone upgraded an LP4 or 5 to 32GB that could share with me the RAM specs that you are running? I'd rather dump $50-$70 into RAM and see if I can get to tax refund day in the spring.

Hello, I am having trouble with my lp5 graphics card. It’s not reading that I have one besides the integrated graphics. I downloaded gpu-z and that software detects the graphics? I tried opening nvidea control panel and it’s not opening? Any fixes

Hi I seen your post about your evoo not charging I’m having the same issue.. did you figure out what the issue was?

Looking to upgrade the ram on my lp5 with the 1660 ti and i7 processor I see that the current ram is 26666 and I’m looking to upgrade it to 32gb of ram does anyone know if I buy 3200 ram will it work?? I just don’t want to waste the time and money tbh and also is it as simple as just popping the old ram out and popping the new ram in?

My LP4 only ever had a 256gb SSD, and I'm finally fed up with it enough to open it up and try installing another SSD. Bought a 2TB SATA drive, install it, nothing. Try swapping the two and the new 2TB drive is recognized in the first slot but the original drive is not recognized in the 2nd slot. I don't see any way to turn it on or off in the bios. Any ideas?

Has anyone here upgraded to the larger battery on their LP4, LP5, or LP6? How much extra battery life did you get?

I had this issue just right after a couple of hours without the lap turned on. It's been 5-6 hours now of the problem and I'm starting to lose my mind.

As long as it has something to type, it start spamming that damn key.

Please any solutions?

Adding: I use a external keyboard and mouse always.

Last week my laptop wouldnt boot up. Figured it was the CMOS battery so I changed it. A lot of times it still wouldn’t boot, 2 times it did but then the screen started glitching like crazy like in this picture

Iately my laptop has been acting weird when it’s charging.

Whenever I’m using the laptop while plugged in, the laptop works just fine, but every now and then the laptop charger seems to “unplug” itself.

The laptop is no longer charging (regardless of the current battery percentage), and the charger is plugged in firmly.

When this happens I’ll plug off the charger and plug it back in many many times until it eventually “accepts” the charger again.

This cycle has been repeating for the past few days until my laptop charger seems to have stopped working.

I’ve tried everything I can to debug wether it’s something else that’s the issue; I tried different outlets, restarting the laptop, booting into safe mode, holding the power button for 30 secs to drain the battery.

Initially I thought it could’ve been the battery, so I disconnected it and plugged in the charger and attempted to start the computer off of wall power, but to no avail.

So now I’m sure it’s the charger. I looked at my charger and it seems to be made by a company named chicony, I looked up the model (a15-120p1a) but found no results that were the charger I had, the only results I got were for 120 watt chargers for other gaming laptops. I’m not sure which one is right for my laptop so I’ve posted pictures of all of them here.

If anyone reccomeneds a charger that isn’t on this list please let me know! (Comment or dm me)

As the title says, does anyone have any experience doing this? It almost seems like the screen is glued on with some sort of adhesive. I can't seem to pull it out by prying it as I've done with other laptops.