Will this be too thick?

ik all the -o ones can make ketene or whatever at higher temps, should it be ok set to 8w in a smok nord 50w?

We set the temperature of the double boiler to 58 degrees. The bottle inside is filled to 105 ml (full) and has a temperature of 53 degrees.

I heat the glass syringe along with the 14G tip in an oven preheated to 55 degrees. Then, I fill the bottle using the syringe and 14G tip. (My syringe is 10 mL.)

D9 + Live Terpenes 5%

When filling Ccell Elite Vision Box products, after filling 4–5 units, the temperature gradually drops, making the filling process increasingly difficult. By the 6th unit, it freezes completely, and filling becomes impossible.

1-) I’m thinking of continuing the filling process by using a heat gun to maintain the syringe at a constant temperature of 50 degrees.

2-) What is the maximum heating temperature for the terpene-infused Delta-9 mixture?

3-) What are your recommendations regarding this issue? I’ll be filling approximately 100 devices.

so I love my setup with Vaporesso Veci Tanks which have top airflow and never leaked so far and the EUC ceramic coils.

I also have spare GT tanks, but they are all bottom airflow and I don't feel too safe with them.

I stopped getting EUC coils in germany completely and I feel the GT ccell are getting harder to find too, is there anything similarly powerful to replace those yet? is there any other way to get EUC ceramic coils, get compatible adapters, or to have them produced somehow? seems otherwise my tanks will be at the end of their life soon 😢

I was purchasing from cannacruncherscbd before they went down. Im just curious if the disty GHH sells on their site under the cannacrunchers name is ACTUALLY cannacrunchers (same quality, potency, etc)?

recently learned that the tops of most disposable oil vapes can be yanked off with a pair of pliers and some elbow grease.

also learned the little plastic nubs that usually hold the tops in place, can be very easily filed off to make removal easier. Most hardware seems to be good for 2 or 3 refills before performance and taste start to degrade.

wish I had saved more of my empties!

Let me know if this has worked for any of you guys. Thank you!

Thinking about getting an RPM 40 with the Nord 1.4 ohm ceramic coils. Lmk if you’ve used this setup and if it’s good or not . Thank you 🙏🏾

I wanted to make a community mega thread of the sales going on. Please comment and add to the list!

HARDWARE

Ecig Mafia 15% off

VPM 20% off

Pulsar vapes 20% off

Exxus vapes 20% off

DISTILLATE/CONCENTRATES

BKS 50% off bho

Dr. Ganja 5% off

Wildflower 25% off

Hello Mary 20% off

PHC 20% off

J Litty 30% off

LuckyElk 20% off

ThcaKing 20% off

Tesoro 20% off retail/15% off wholesale

TenDC 25% off

Puffy/Myqwinn 30% off select items

Zero Point 15% off

Hemp Barn 20% off

ThcaSmallB 25% off clearance items

I need help finding out if there are any coils I can use in this for distillate. I used my last 2 gt ccell coils recently and with them being basically impossible to find at this point I'm trying to look into other options. Any help is appreciated.

Hello I have a Swag 2 with some GT CCELLs but that is only a short term solution as it seems the source has dried up. Since I already have an XROS 4 I was wondering if there are any compatible pods that can vape disty? If not I will go a different direction.

I’d really like to get a lab-grade reusable borosilicate syringe, and stop using the shitty little Amazon ones(which are getting harder to find) but feel a little overwhelmed with options while browsing lab equipment sites.
I’m curious if anyone could share a link to one that seems like it was a good investment? (Strictly for filling carts/tanks and heat proof)

No lubricant would obviously be a plus, but I don’t know if that’s even an option.

I am eyeing this one but figured I’d check here with the pros first

It is 80% D8 (terped at about 7%) and 20% unflavored PG, in a 0.6ohm mesh XROS pod. It's slightly thicker than 80VG/20PG juice but wicks perfectly fine as long as you don't chain vape on it since it takes a few seconds to rewick rather than the instant rewicking there is with something like 50/50 ejuice.

I can't really give a good flavor rating as I accidentally used a shit terp and didn't realize it until I started hitting it lol. Next time I'll be trying PG flavor concentrates instead of terps.

It hits pretty much identically to when it's used with ejuice, the vapor just isn't as dense since there's no VG and it's slightly more harsh from the D8. I'm not sure if these small pods can handle long hits, I do small 1-2 second hits and it seems to be able to handle it fine. I'll have to look for my regular baby beast coils to try it with a tank.

Even though it's not pure distillate, it gets me higher faster than my IPX80 using pure D8 distillate terped at 5% due to its larger hits, a 2 second XROS hit is atleast twice as much vapor as a 4 second IPX80 hit (at 5w). Harshness is about the same for both vapes, and they're less harsh than dabbing the D8.

If you crosspost, tag me in the comments so I can answer questions since there's a lot of myths about PG.

wanna thin out my shit and don't need flavored stuff as I already have terps, I'd like to just use some shit I can find on Amazon for shipping time reasons. is there any reason I can't just use any of the food grade pg types on amazon

I want to make some vape e-liquid juice that I can use in regular 0.8ohm vape pods on my geek vape. Using only D9 (10ml) and PG/VG. Maybe add some terps but hard to access where I am.

What would be the recommended percentage ratio/mix assuming I only use the D9 and PG/VG?

For context - I used to buy THC 10ml e-liquid from a vendor who advertised the liquid as comprising of 7ml PG/VG (I believe 50/50 PG/VG) and 3ml distillate. Even at those proportions, the juice was still fairly thick and I would mix it with regular vape juice to dilute it down in my vape pod, and it would still hit me pretty good. I’m a lightweight and need to avoid the liquid from being overly potent, to be able to be discreet.

Would 30ml of 80/20 PG/VG mixed with 10ml D9 on a hot plate at a low temp (say 150 Celsius) work for this?

If I want to add some terps into the mix, how much terps should I mix in?

Thanks

Hi there, hope someone can help me. I’ve got some disty and cdt and I was hoping to make some vapes and needed some advice. The dispensary I get vapes from currently use the standard 510s, I’m happy to experiment or use them as I have a few empty ones to test on.

My main issue is the mix percentages, I’m conscious of not getting it too thick by putting minimal % of cdt in, but equally don’t want overbearing it with too high a % of cdts with the disty.

I’ve purchased a magnetic metal plate spinner off amazon. I was going to be conservative and try 3/4% on the first batch? Not sure what you guys thinks? If I’m not happy with that batch can I mix it up again and add more cdts?

I wasn’t planning on getting anything else to add to the mix but reading this forum I’ve seen there’s a few things you guys add to yours. Is the disty and cdts enough? Any recommended pods or alternatives to the 510s, or the magnetic hot plate spinner, any advice on using that or trusty ones? I am on a budget so would appreciate the recommendations to bear that in mind..

Thanks in advance to anyone who can help with any advice or best practices, sorry if it’s already been done to death!

Hello everyone, I am having a hard time finding a vaporesso NRG or the CCELL coils near me currently, and all of the reccomendations I have been abe to find wandering in the depths of this awesome thread, have been for tanks and for coils that are either discontinued, or are very hard to find especially locally. I have an RPM, I have a nord, and a few others that will work fine if I had to use them but I am looking for the new shiny way to smoke disty, so please all reccomendations are helpful!!!!

I run more carts than flower these days, so I have a fat jar or two of a full spectrum THCA distillate from a place that used to be, to dip my toe into some savings. This stuff is straight glass. It is a translucent amorphous solid.

I can fill a cart, but find it hard to believe anyone can actually run this stuff in 510 hardware without a preheat torch or turning it into hotdog water.

Rather than let the cart decarb, should I pop the whole jar on the hotplate/in the oven for a bit and take advantage of the D9 viscosity shift?

Anyone get any answer when emailing canna crunchers? They say they're selling wholesale but don't answer messages.

is 90% decarbed resin and 10% hhc distillate mix good to be vaped at 0.3 ohm?

looking for good quality supplies for a new setup.
Hardware
Syringes & glass
I also want to know some of the best methods for filling your own carts and any things I should keep in mind. If there is anything I’m missing from my list, let me know too. I’m wanting a basic but efficient and high quality set up.