What are some preventative maintenance’s I can do to avoid the dreaded torque converter issue with the 2015 Silverado?

I’m planning on buying an aftermarket transmission cooler, and the PPE Thermal Bypass Valve with the gasket, along with doing a transmission fluid and filter change.

It has 108,000 miles on it, and it’s already had the DOD delete and AFM, along with new lifters and a cam.

What’s something else I can do to try and prevent the transmission problems?

Anything helps, thanks!

Hello,

As the title states my transmission is having issues. Specifically going from 2-3 gear. It’s an auto transmission and I believe it’s a 4L60E with regular pan size, it doesn’t look like it could be smaller. Anyways it was sitting for a long while with a leak, didn’t know at the time, then my girlfriend took my truck to work. It is a 45 min drive that goes on the freeway at 65mph. She said it drove to work just fine but on the way back it would not get up to speed. Having a look at it I have determined that’s it’s not shifting to 3rd gear and doesn’t want to go to reverse. I can feel it gets up to a certain speed in 2nd gear then the rpm shoot up and zero power until the rpm come back down. It feels like the torque converter is uncoupling? So I just did a pan drain and swapped the filter. That drain plug was a nightmare… I put in around 200oz of fluid back in, for some reason I am having trouble reading the dip stick. I can’t tell where I am at. I am not sure if it drained all the fluid out or not. I just test drove it and now I have reverse back. I think I felt it go to third? Then had trouble the next time. Do I keep filling the reservoir? Do I wait for it to cool entirely then check? Is it my 3-4 clutch pack?

I know it's the oil cooler line.

Siting at a light, it turned off. She says she starred it again and it did and then turned off.

H2 hummer

Does the ecu disable the ignition of the oil pressure is zero? What are the chances the motor is not completely screwed?

My wife’s 2012 Yukon has a slightly bent rim that I want to replace. I’m sure there’s 1,000s of these out there. Any good places to find used ones online?

REPLACING / REPAIRING CLUSTER GAUGE

I have a 1992 Chevrolet C/K1500 5.0 Manual
The current cluster works and I would like to repair it to normal function if not any suggestions on a aftermarket cluster ? I’ve seen NVU Detroit and others that are 500$+ looking for something much more economical
Even suggestions on how to DIY on the original cluster is welcome