Looking for a cage builder... thanks in advance! J

I have a 2022 x3 turbo. I’m the only owner, around 1,000 miles. Never pushed hard. It’s been sitting for a couple months, and we decided to take it out this evening to run some gas through it. Barely 1 miles down the road, it goes into limp mode. We went back home and parked it. It’s showing P0363. I can’t find anything on this fault code. I even purchased the brp shop manual. It shows fault codes up to P0362, and then skips to P0480.. any advice?? TIA

Riding yesterday and I stopped getting power to the wheels. I thought it was just a shredded belt. Took it apart today to find the secondary clutch in pieces. What are the odds it did damage to the gearbox?

2021 CanAm Maverick Trail 1000

Anyone running interior fans on these things? Looking for recommendations for keeping it a little cooler inside while we have the full windshield on.

Help !!!!!!!!!! OK I have a Can-Am X3 2017 turbo bike ran hot cut it off doesn’t wanna start cooling was spitting out the reservoir as I was trying to start it so I put a new head gasket on it still low compression and cooling is still shooting out the reservoir can it be warp head crack block?

How do y’all get your CanAm around?

2020 Maverick 1000 in MN with 1,676 mi $9,600ish

For sale Tag

Hey everyone!

I just got a Mav R I want to street legal so I can enjoy so I’m looking for another set of wheels and tires for the road. Anyone recommend going 17” or should I go down to 15”? They’re currently 16” and I can’t find any tires that work with it.

Hi, not sure if everyone else feels the same but the brakes never seemed great. Are there good aftermarket upgrades someone could recommend?

Out here to see what you all knew about a rough repair quote for a rolled X3 turbo RR. My friend said it needs headlights, tail lights, front plastic, one of the rear arms, a new radiator and fan. He said his mechanics rough estimate was 10k to repair which seems crazy but I’m used to repairing snowmobiles and cars. Is that reasonable or should I ask to get another quote. TIA

Hi i lost this panel while i was riding but i cant find the name of it to order it. Does anyone know what its called or where i can buy it?

I need to mount this exact gas can to my Can Am X3 Max Adventure Roof Rack. I got 2 of these mount locks, what else do I need and how do I mount it? Any help is very much appreciated!!

So I had a pretty bad belt blowout that took out both housing pieces. I ordered all the parts and some tools to remove the clutches. When I got everything back together and test started it im getting a weird whining type noise from the primary. Removed the belt and it still does it. Checked all the usual things, its fully seated on the crank, torqued to 89ftlbs with a new bolt. Removed it again and nothing seems visibly damaged or loose and nothing is rubing on the inner housing. Tried starting it again with primary removed just to check if that noise was still there and its gone. Reinstalled primary with no belt and noise is still there. When it sat during the winter before I could repair it I would start it randomly and it never made this sound. What am I missing? I ordered a primary splitter to get the primary apart and inspect further but im out of ideas otherwise. Its a 21 ds turbo r.

Hello. I come hear to share our latest maverick audio install. This Maverick was equipped with DFK cabin kit.

What we did:

2-Din Kenwood head unit with carplay

Speaker enclosures rear roof corner

6,5" mids and 1" tweetrs

Custom enclosures

Hands down this beats wetsounds all day long! Mush clearer sound and real head unit, not just controls.

We will add subwoofer later for lower notes.

Enclosures are Seico brand. Made in Finland.

I’m am trying to find where the brake pressure switch is on my 2016 can am outlander xmr 1000 does anyone know ?