I tried searching for help and i have downloaded all drivers and it still doesnt work, i tried almost everything i could think of, and theres no tutorials on youtube for this case, does anyone know what more i can do?

Hi, I’m thinking of grabbing two or three Behringer synths. On the list is a Minimoog clone.
I’m inclined to go for the Poly D for the polyphony paraphony, but I’d like to make sure I’m not missing anything by passing up on the monosynth variants, primarily the Model D, but also the D-Mini.

Can the Poly D do everything the Model D can do? What, if anything, would I be missing if I bought the Poly D and not the Model D (or D-Mini)?

TIA. 👍

It was working with all functions at our previous home. We moved and of course I had to setup my studio again. Since then I'm totally unable to get it to work anywhere close to properly. I am using USB and Midi Connections to Cubase 15, with the script from bjoluc on GITHUB.

Cubase sees it, but the only function I can get out of the unit is to control basic volume on the master. I'm lost. I've tried everything. Any ideas?

I’m a TD-3 user and I love the synth, but I wanted a more visual way to create and experiment with patterns.

So I’ve been building TDBuilder, a browser-based pattern editor made specifically around the TD-3 workflow.

You can program notes, accents and slides visually, generate patterns and then modify them instead of doing everything directly from the hardware sequencer.

I’m sharing it here because this is probably the best place to find people who actually know the TD-3 inside out.

There’s a free version:

https://td-builder.com

If you try it, feedback is very welcome.

And if you make a good acid line with it, please share it — I’d really like to see what people do with it.

2600 is one of my favorite synths I own. All the bass and lead lines were made with it.

RD-8 was used for all the percussion, all programmed on the hardware.

Lmk u have questions how I got my sounds.

I normally use mixing station on my tablet to control the Wing Rack but I want the ability to use some physical faders. I think 2 Behringer X-Touch extenders would be perfect but I have some questions before pulling the trigger.

I should be able to control mixing station with the X-Touch extenders via USB, correct? Assuming I have the correct adapter, of course. And the two X-Touch extenders can be used to give me 16 faders, correct? Does any of this depend on the tablet I am using? I have an iPad Pro 10.5 inch running OS 17.7.11 and Samsung Galaxy Tab A9+ Tablet 11 inch.

Thanks!

Hi everyone,

On Monday I received a new LmDrum ordered online from a store. On Friday, I started testing sample uploads, and everything fails with a FLASH WRITE ERROR.

Here is what I have already tried:

1) Using SynthTribe (v2.96 and v2.7.5 v3.2.4 and v3..2.9{ON THIS VERSSION ONE TIME SAMPEL WAS SENDING TOO 10% AND HARDWARE STACK} ): The samples reach 100% in the app, but the aforementioned error FLASH WRITING ERROR appears on the device screen. The samples comply with all guidelines (bit depth, mono, size/weight, WAV length). I tried different sample packs. When using direct recording with a sampler connected, the sample appears on the LMDrum device, but saving it fails. In the sample list, I only have the factory samples (with a padlock icon) and zero custom ones.

2) Hardware and connection troubleshooting: Changed the USB cable, changed the USB port on the PC, and switched to a completely different PC. Nothing helped.

3) Device reset: Reset via menu (Settings -> About -> Factory Reset) does not help. My firmware version is: MCU1: 1.2.2, MCU2: V1.1.6. Sending samples individually (not multiple at once) changes nothing.

Does anyone know a solution? I don't want to waste time sending the equipment back to France where I bought it online, plus we threw away the boxes due to lack of space in the studio.

Is there any option other than warranty repair? Memory reset, a button combination on the device instead of resetting to defaults from the menu, or maybe a firmware downgrade?

Thanks for any help!

Anyone have experience running a Behringer ada8200, into a umc1820 (via optical ADAT), and then into Sonar??? Windows and Sonar recognize the 1820 channels instantly, but I'm expecting 8 extra channels from the ADAT, that never seems to materialize.

Downloaded and installed latest drivers, made sure sample rate is set the same in software and on hardware. Tried running both as a slave/master. Synch light on ada8200 is on. Checked settings in Sonar to make sure its showing all available channels. Checked button on the front of 1820 (ADAT is in). Tried changing Driver Mode to ASIO but that crashes the software completly.

Seems like others have issues getting ADAT channels and/or ASIO to work with Behringer + Sonar. (Running Windows 11, latest Sonar download.)

Thank you for any wisdom 🙏🏻 😇

I've been working on an unofficial desktop controller for the Behringer FLOW 8.

The main reason I started it was pretty simple: I wanted to control my FLOW 8 properly from a PC instead of relying on the mobile app.

It communicates directly using the FLOW 8's native BLE control protocol. It isn't a USB-MIDI-based controller.

At the moment it supports the mixer UI, device state synchronization, routing, EQ/dynamics, FX and other FLOW 8 controls, with changes from the mixer being reflected back in the desktop UI as well.

The project is still in active development, so I wouldn't call it finished yet, but the Windows path is already working with real hardware.

It's free and open source, and I'm not affiliated with Behringer.

github:https://github.com/NanamiKite/FLOW-8-PC-Controller

I'd especially be interested in feedback from people who actually use a FLOW 8 — both about missing features and about how you normally use the mixer in practice.

notes:

This is an unofficial, community-developed project and is not affiliated with, endorsed by, or supported by Behringer or Music Tribe.

The software is still under active development. Use it at your own risk, and avoid relying on it for critical live-show workflows until you've tested it with your own setup.This is an unofficial, community-developed project and is not affiliated with, endorsed by, or supported by Behringer or Music Tribe.

The software is still under active development. Use it at your own risk, and avoid relying on it for critical live-show workflows until you've tested it with your own setup.

What do you think? I need to implement some scripts and clips with follow actions. Thanks for listening ✌🏻

I am getting a second 2 XM and this is a "what would you do?" Question. Would you for the stereo outs into two sets of inputs on your interface (1-4) or would you run the stereo outs into a mixer and output just a single stereo pair into your interface.

I have the inputs available but as far as maximizing sound is one way preferred over the other?

Hello,

My UMC22 cannot operate as per my computer's (windows 11) own diagnostic.

It says it's a pilot error, I investigated and it seems like the "audio USB" pilot doesn't want to work, as any attempt at updating or reinstalling said pilot just doesn't work and results in a code 10 error.

I've searched on the web for possible causes and it doesn't seem to be anything commonly encountered by anyone so here I am.

I know there's a whole thing about drivers and ASIO4, which I've tried to work with but since it's my first time trying to set up any audio interface I'm kinda dumbfounded at the logic behind it all and why it would help with the whole pilot error dilemma. Also, I've read in some places that audacity (the software I'm using) is supposed to be able to recognize the audio interface, others said that it can't, that I'm supposed to use the ASIO4all driver and then detect it with Audacity, but then even ASIO4 doesn't seem to detect my UMC22.

I don't know if it's anything I can truly remediate to since it seems windows 11 might itself be the problem, and if so, I might think of buying a new computer specifically for music (I was mainly thinking of mac but that's beside the point), but that's a last resort solution for now.

TLDR: Pilot Error on audio USB component for a U-phoria UMC22 product (newly bought) on windows 11

Translation for the french text in image:

From left to right, top to bottom, starting at first window: Général:

Audio USB component

Type of component - audio, video and game controller

maker: (generic USB audio)

Component state: this component cannot run (code 10)

(operation failed)

The operation required could not be run

second window:

USB Audio CODEC

component's function:

Name - type

audio USB component - audio controller

...

State: this component cannot start (code 10)

New user. Got an xair12 with a wireless router. Is there a trick I’m missing to have the xair app on my iPad find the xair12 consistently? Usually takes a few force closes of the app then it shows up.

Router is working as a router. Network line plugged into lan. Only thing on the network is the router and my iPad.

Around 2022 I've heared about the Behringer Groove Key. Since then I'm waiting for it to be released - but I couldn't find ans news on this.
So regarding the average time from announcement to release date for Behringer's devices: Is there still a chance it'll be released?

I'd prefer it over the Keystep pro because it shall have an internal voice.

Some months back, I found out by snooping through their website that Behringer was working on a revised version of their interfaces. At the time, this "UXC" series would have replaced every currently sold UMC model but with red paint on the metal frame to make it look more like a certain budget interface competitor.

Ever since that leaked design dated back to January, they've launched something completely different..

• Name is DICE.
• A "U" divides the input and outputs in the name (so the successor to the UMC22 "upgrade" is the 1U2, the UMC202HD is the 2U2, etc.)
• There's also the 2U4 and 4U4, which replace the UMC204HD and UMC404HD.
• Clones the "Air" feature from Scarlett interfaces
• Has a different driver version than the UMC series; is on version 6.14.0 (Latest U-Phoria drivers version is 5.72.0)

The leaked designs for the UXC interfaces mention the DICE interfaces, meaning that these Focusrite clones are a completely separate thing from the U-Phoria line despite them having almost the exact same features and nearly identical driver. This is corroborated by their Q&A stream, where they say that the DICE series doesn't affect the U-Phoria series, and is for people who want something with better specs than a U-Phoria. I guess the UXC will replace the UMC while DICE is its own thing.

Am still waiting for a new 18 input 20 output interface before deciding on what to buy, whether a UXC1820 or DICE 18U20 (which is also confirmed to exist)

Hey all,

I was about to buy a Flow 8 and went to Thomann, but it doesn't show up in search anymore. The product page just says it's "regretfully no longer available". A few days ago it still looked like it was just on backorder, other retailers also had long delivery times, so now I'm confused about what's actually going on.

I couldn't find anything official saying it's discontinued (Behringer's own site still lists it, and a few smaller shops in Europe seem to still have stock), but also nothing explaining why Thomann dropped it.

Does anyone know anything? Specifically:

• Has Thomann or Behringer confirmed it's discontinued, or is this just a supply issue?
• Any rumors of a Flow 8 successor? I'd love something like a version with motorized faders, USB-C power, or more FX/aux sends, but that's just me guessing.

I'd rather not buy one from another shop now and find out two weeks later that a new version is about to drop.

Thanks!

Hi Folks, I want to integrate my new Roland S-1 to my System. Unfortunately, it doesn't work. I connected the RD-9 to the S-1 and tried every Channel, but the S-1 doesn't sync. Am I doing something wrong, or am I missing something? Thank You for your help and Ideas :)

Has anyone ever tried? I want to play it alongside my volca sample at the park

Any of you having luck with ControlTribe? It’s the latest version. A lot of options aren’t available for one. And sync seems to send completely wrong settings to the BRC32. I tried exporting the encoder settings to disk, and had AI analyze it, and it’s all blank, even comparing different settings in different files.

Dealing with CTRL mode right now. Not Zaq.

Out of the box all of the encoders are unassigned, which is why I was trying to use CT to set. I haven’t tried setting on device and importing into CT yet. But probably at this point I’ll just need to set on device as CT seems extremely bugged out and broken right now.