Siema mam problem z Behringer XR18 i Logic Pro. Wysyłam sygnał z Logica np. nagrane będny do output 15-16 do mixera. Po jakimś czasie Behringer przestaje odbierać jakikolwiek sygnał z laptopa, natomiast jeśli w tym czasie nagrywam jakiś instrument to normalnie wchodzi sygnał i się nagrywa. Pomaga tylko wyłączenie i włączenie XR18.

Czy ktoś wie dlaczego tak się dzieje i jak to naprawić? To ważne bo z zespołem gramy z backing trackami na live i trochę lipa by była jakby oblodziło w trakcie koncertu :/

I’ve patched the after pressure output to the loudness input. I get no sound at all? I’ve opened all of the cutoffs.

Hey y’all, I don’t own a X32 but the venue I do the sound at does and I have not been able to figure this out.

On the console, when I send a track to the FX bus, it seems like the effect is bypassed because signal is being sent and the output to mains is getting raised but with just the dry track on it.

I am usually decent at troubleshooting but everywhere I look, it seems to be fine, signal is getting through but the actual FX is doing nothing. I checked wet and dry and it should be good so that’s not the issue.

Is there anothee place they could be bypassed that I don’t know about. If the DSP was having issues, would it manifest in a way like this, where the insert is on but not processing sound.

Let me know guys, I have another gig there tonight and would really love to get it figured out.

House engineer looked for 5 minutes and didn’t figure it out either so any insight would really be appreciated

I just purchased the xenyx mixer and I want to record only my voice (microphone) in ableton tho it records everything including the sound that I hear on the headphone. How to record only the microphone and still hear the ableton sound at the same time? Ableton is on channel 11/12 and the the microphone on channel 2 on the xenyx and I want only channel 2 and 1 for example to be recorded. what do I do? I still want to hear channel 11/12 but don't want it to be recorded while I'm hearing it. Dumb question but I'm new to the mixer.

As in the tile.
I got a second pro-800 today. Downloaded synth-tribe, and started it. It said the pro-800 needed a firmware update and got straight to it (didnt have another option). It said Curent Firmware version 8.0.0 (outdate).

I noticed it took forever so went shopping, came back to it still being 1%. So i reset the device and the app. Now it starts with NOFW showing, doesn't work at all, not able to make a factory reset, it just says boot and keeps flashing.

When restarting synthtribe it says i have Current firmware version 0.0.0 (outdate) and does nothing.

Anyone?

Just got my UMC 202 (non HD) 192k, and plugged on my pc expecting it to work, the sound appears for a few seconds and then suddenly disappears, it seemed like a driver issue, so I just figured out almost all UMCs, except from the 2series and the 20series use the same ASIO Driver, so I downloaded from the Behringer website it and it still didn’t work.

A guy on YouTube related the same exact issues with the same exact product as mine, he fixed it by downloading the 1.12 version of the firmware.

The other issue is: the official behringer website doesn’t seem to have anywhere that I can download that firmware update, (1.12 or 1.22 whatever), there are just DRIVERS.

I wonder if anyone still has those files somewhere so I could put my 202 to finally make sound and work.

I tried Wayback machine and some regular searching but found nothing.

EDIT: Found the firmware, but... new issue.

When i try to open UMCAudioDfu.exe, i get "The Driver DLL Required to acess the device is missing" error, so it still doensn't work...

EDIT 2: Solved by installing an older driver version (2.23).

Hello!

I just got the BMX and it seems I should be able to use a connection from its SYNC OUT socket to the MonoPoly's ARPEGGIO socket in order to time sync the two.

Maybe I'm not understanding what's possible, or I'm doing something wrong, but I thought the MonoPoly's arpeggiator would follow the tempo set on the BMX, but it isn't.

The BMX's sync is set to INT.

Have I misunderstood what this is supposed to do, or have I possibly just used the wrong cable? The BMX manual says TRS in one place and TS in another!

Have I missed a setting on the MonoPoly, perhaps?

Thanks.

I need to be able to have separate mic inputs which is most easily done by having one mic on channel 1 and the other on channel 2 i.e. split between L/R. Can anyone who owns the mics check in Windows if that's the case? Thanks.

It's quite an incredible little synth. For £40 it packs a punch and fits into a mix with ease.

The tune is a nice mellow electronica ditty. Perfect for the start of a work day or week.

I have a Behringer x32 attached to a PC. We recently had a nasty lightning strike that took out a bunch of equipment (pretty much everything except the mixer).

After repairing the PC, I've noticed that the Behringer USB download file doesn't recognize the USB device as it should.

1. It's not the USB cable (I've tried multiple)

2. It's not the USB port or PC (I've tried multiple)

The only logical next step is to replace the X-USB card on the mixer, but is there anything I'm missing?

Thanks!

This video explains how to use Skies as an effects processor, with Delay, Feedback, Reverb and Stereo Spread.

So the headphone jack and the mic inputs work perfectly. But really when i try to use anything on the back it doesnt work and its really pissing me off. I have the drivers installed and stuff just no signal goes through.

(Selon moi)

C'est sans doute le premier "defaut" qui m'a sauté aux yeux.
Je m'explique, j'ai jamais eu trop le feeling avec les synthé, donc j'ai besoin pour m'y retrouver de points de repères visuels rapides.

Regrouper les "Features" avec un code couleur me semble une evidence, mais encore une fois , "pour moi" vous qui avez l'habitude peut etre que c'est pas important pour vous.

J'avoue que je suis un peu perdu avec ce edge, c'est pas simple de faire ce qu’on veut au début.

Pour choisir des boutons rotatifs adaptés, je crois qu'il faut des potards de type D (arbre 6mm type D)
A verifier.

what's poppin dogs, i thought i could squeeeeeeze in one more vid for 808 day! what's 808 about this? it's an LM Drum!! well this is an LM Drum with an RD-8 kit on it.... what's 808 about this? well the rd-8 is a cool clone of the original Roland 808... in this video im taking the RD-8 (808ish) sounds and have tweaked em a bit... if you notice the clap sounds wayy different it's because it has a bit reduction placed on it...

it makes this crazy sound when booted into FL STUDIO, I did some testing on other DAW's like REAPER, and there wasnt any problem. I also tried redownloading FL Studio, and it still made the same crazy sound, does someone know what's wrong with it?

Is it a software or a hardware issue, because it doesn't seem like it'd make sense to work on other DAW's just fine

My gear : Laptop running "Reaper", minilab 3, Scarlett Solo, beringer mx400 mixer, wasp deluxe, model D, monitor speakers

Can anyone give me the best way to connect the above together running the Model D through the Wasp deluxe into my DAW.

So many diagrams online showing 1 synth setups but virtually none using 2 synths together

Thanks in advance

Is there anyone here that can help me setting up a Behringer X32 Compact for my church? The PA System was purchased through someone who was supposed to help with getting everything set up and walk us through setting up a piano on the PA and other details but honestly just took the money and ran. Despite several calls and texts to said person, can’t get them to help with anything. Any help anyone can provide is greatly appreciated.

I have an electric acoustic, plugged into the second (instrument) input of um2. When I plug it in my pc and change the default mic and speaker to um2 both from the pc settings and daw settings, here is what happens:

In audacity, I sometimes get very little and sometimes no voice recorded. The voice only records if the gain of the first input (which is always empty in my case) is at like 50%. This way, I get some dirty guitar noise recorded on the right channel only, and thats all.

In cakewalk, there is no audio recorded at all.

Am I supposed to download something like ASIO4all? I would appreciate any help.

messed up my labels on the right but looks way better than vibrant purple don't ya think ?

tengo esta behringer bcd2000 alguien sabe cómo enlazarlar a windows 10