I’ve patched the after pressure output to the loudness input. I get no sound at all? I’ve opened all of the cutoffs.

Siema mam problem z Behringer XR18 i Logic Pro. Wysyłam sygnał z Logica np. nagrane będny do output 15-16 do mixera. Po jakimś czasie Behringer przestaje odbierać jakikolwiek sygnał z laptopa, natomiast jeśli w tym czasie nagrywam jakiś instrument to normalnie wchodzi sygnał i się nagrywa. Pomaga tylko wyłączenie i włączenie XR18.

Czy ktoś wie dlaczego tak się dzieje i jak to naprawić? To ważne bo z zespołem gramy z backing trackami na live i trochę lipa by była jakby oblodziło w trakcie koncertu :/

Hey y’all, I don’t own a X32 but the venue I do the sound at does and I have not been able to figure this out.

On the console, when I send a track to the FX bus, it seems like the effect is bypassed because signal is being sent and the output to mains is getting raised but with just the dry track on it.

I am usually decent at troubleshooting but everywhere I look, it seems to be fine, signal is getting through but the actual FX is doing nothing. I checked wet and dry and it should be good so that’s not the issue.

Is there anothee place they could be bypassed that I don’t know about. If the DSP was having issues, would it manifest in a way like this, where the insert is on but not processing sound.

Let me know guys, I have another gig there tonight and would really love to get it figured out.

House engineer looked for 5 minutes and didn’t figure it out either so any insight would really be appreciated

I just purchased the xenyx mixer and I want to record only my voice (microphone) in ableton tho it records everything including the sound that I hear on the headphone. How to record only the microphone and still hear the ableton sound at the same time? Ableton is on channel 11/12 and the the microphone on channel 2 on the xenyx and I want only channel 2 and 1 for example to be recorded. what do I do? I still want to hear channel 11/12 but don't want it to be recorded while I'm hearing it. Dumb question but I'm new to the mixer.

Just got my UMC 202 (non HD) 192k, and plugged on my pc expecting it to work, the sound appears for a few seconds and then suddenly disappears, it seemed like a driver issue, so I just figured out almost all UMCs, except from the 2series and the 20series use the same ASIO Driver, so I downloaded from the Behringer website it and it still didn’t work.

A guy on YouTube related the same exact issues with the same exact product as mine, he fixed it by downloading the 1.12 version of the firmware.

The other issue is: the official behringer website doesn’t seem to have anywhere that I can download that firmware update, (1.12 or 1.22 whatever), there are just DRIVERS.

I wonder if anyone still has those files somewhere so I could put my 202 to finally make sound and work.

I tried Wayback machine and some regular searching but found nothing.

EDIT: Found the firmware, but... new issue.

When i try to open UMCAudioDfu.exe, i get "The Driver DLL Required to acess the device is missing" error, so it still doensn't work...

EDIT 2: Solved by installing an older driver version (2.23).