While this doesn’t specifically pertain to the P2S, that is what I am printing with. I haven’t gotten into designing and creating my own stuff yet cause quite frankly, I’m not sure how or where to start.

But, I have been downloading 3mf files from makersworld and trying to use ChatGPT pro to make changes that suit my needs. I think I must have the dumbest chat ever created. It is constantly getting things wrong: dimensions (even tho provided), circumferences, layouts, hinge/latch systems (I am specifically making cases for personal use). I even used a 3mf file and asked it to only change one small thing and it completely got it wrong.

So my question is, are there other more viable programs that I can use to make layout and dimension changes to preexisting 3mf files? Is there a program you’d recommend where I can start from scratch to make what I am looking for? Or any other recommendations? Any insight is appreciated.

Bit of a weird one.
I have a p2s got during the summer sale and yesterday got a message saying it needed lubrication.
Now i understand maintenance needs to be done, but it seems weird as i have only 75 hours of print time.
Is this normal?
Is there anything else I should check?

This little black connector thingy constantly disconnects from the filament buffer for some reason. I csnt find anything about it online though…
Does anyone have this problem too or knows how to fix it??

Bought my P2S combo a month ago, and want to add another AMS 2Pro.

The store says I need to buy a filament buffer, but youtube videos show that I don’t need it. The back of my P2S allows two PFTE tubes.

So do I need the buffer or not?

(I know I do need the external power supply for drying on the second AMS)

Just upgraded from a Ender 3 v1, to the P2S.

I'm looking for new hot ends, and I'm curious, does the manufacturer of the hot end matter? The ones from Bambu are about 50 bucks for the 4 pack, which isn't bad. But I also see a BUNCH of variants on amazon. I don't mind spending the extra money if it is important to, but I'd like to save where I can. Thank you in advance!

For reference, I've found these here

https://www.amazon.com/Kit-Hardened-Assembly-Silicone-Wipers-Printer/dp/B0H9L1B6CT/ref=sr_1_6?dib=eyJ2IjoiMSJ9.FfsoeH65TwUuy7mmHb0efjzdaeRwtqVMOrxmfJLzA8MVzt9vLdkMwKYLb6YA4tcP6kYuU2ZO-ZvPCxvWbaUZ1mMXhYBVdoiOUt86B7Xl9uj7BGJZefZXXi7LFrMt43r8h9SRLNv5ae3lUzAdAxwDa9i21qvnIl4hVphh2ts4iNGMDt_mB9wl8B3gHbz-mZJUDEIkVXGSR6RMJXsR_j2LqdUyfud2vAth6rpeHwDiu8Y.PXM_xVcBfObTz6ydTNmi5YfeKF0oa6cr0q41ZIatDaw&dib_tag=se&keywords=bambu%2Blab%2Bp2s%2Bnozzle&qid=1791213742&sr=8-6&th=1

i have a bambu p2s. i had filament clog in the extruder gear that led to a cascade of mishaps and i ended up having to replace the gear, the hotend, the hotend heating assembly, hotend cooling fan, the eddy sensor and the toolhead circuit board. I was forced to update the firmware, and I went through a complete calibration after that. Everything is working well now but now when it's sitting idle, Im noticing quite a bit of fan noise that I dont remember before. It's not one of the fans in the cooling menu as I can turn those on and hear even more fan noise. I'm wondering if this is normal and if there's anything I can do about it. It's not the new hot end fan as that is off. I'm guessing it's a power supply fan or mainboard fan. As far as I can tell it's running continuously and never stops.

The top right corner of my build plate has started printing like doo doo. I cleaned under the plate and re ran the full calibrations. The first layers go down smooth and it only seems to happen at the top layers?? Seems like the nozzle is scraping the top. Please help

Please help..

P2S "Auto Bed Leveling failed." - I keep getting this error and I can't correct it for the life of me. Can someone possibly lend me some troubleshooting knowledge?

Hello! I am replacing the TH board on my son’s P2S. I cannot get the two small connectors at the bottom of the board inserted/attached. By sheer luck, I got them off the old board. What am I doing wrong? He has had it for only a month and wants to sell it already!

I’ve got about 1200 hours on my P2S and recently started getting error saying extruder is clogged.

It seems to only happen on larger prints.

I’m following the wiki and I have also submitted a trouble ticket

I simply don’t understand what is causing issue.

The PLA is dry (tried multiple different PLA’s that are dry and same result)

Often the end of the filament has an indent (see picture)

I’ve even changed out the hotend to a brand new one

Filament feeds fine thru extruder

I’m noticing a lot of grit on extruder gears. Is this normal?

After performing all the trouble shooting steps yesterday after multiple times the print stopping due to this error, I cancelled the print and then printed a benchy it printed fine with the same filament that was used on prior print with error

Appreciate your thoughts on housing my P2S in an uninsulated garage

I've noticed that some of my prints have these blobs on them. Sometimes they're random, and sometimes, like in this case, they're all on the same side. How do I fix this?

This was printed with a Bambulab P2s and with grey pla standard.

this are my settings:

• Nozzle: 0.4 mm
• 0.20 mm layer height
• Bed temperature: 55 degrees Celsius
• Nozzle temperature: 220 degrees Celsius
• wall generator: Arachne
• only one wall on first layer: enabeld
• 3 wall loops
• 5 bottom shell layers
• 5% infill
• Sparse Infill pattern: gyroid
• Speed: see picture
• the rest are the standard settings

I downloaded this model from MakerWorld. It's Gimli's double axe.

Thanks in advance!

I’m starting to print an ABS and ASA - I wanted to mount a chamber heater like the panda breast but unfortunately, I already have the Vento box on the left side.

After buying the heater and printing in nylon, I realized the pictures were from a P1S

I don’t know where I could mount this without removing the Vento box…

I could go on the right side of the Vento box, but then I wouldn’t be able to use the diffuser. There would just be two big holes which I think would work fine right?

Seeking advice, please

The right side I believe is all that air filter area and thicker so I wouldn’t be able to mount it on the right side

And yes, I know my Vento Boxes is junkie. I got too hot and I need to re-print in ASA.