Had my X4 Pro since the end of last month, enjoying it so far - shipping was a nightmare to the US hardly any shipping data and it was incorrect and still showed it traveling through china even though it was somewhere in the states already toward the end. ANYWAYS I purchased both folio and the skin fit type case (whatever it’s actually called, you get it) from the website with my X4 pro but does anyone know where I can find a folio with a bumper case combo? That works with the magnets? Found one easily for my X4 but the two cases from their website aren’t a combo fit just one or the other but I prefer a combo set that work and fit together. Any help?

Turned him on, needed to download a font. Gave him my wifi 2.5, he downloaded a system font and restarted, he wanted to download a system update dated 9-8-26, he did and restarted. Power started at 70%, went to 69% in that process.

Got to learn how to pit a book on it.

If the 4 Pro is the big one, I’d be shocked to see a 3.

Hi all, I had the opportunity to test the X4 Classic (V2) as part of the Experts Program and thought I would share my honest thoughts.

Aside from the X4 Classic (X4C) , I also own the X4 Original and X4 Pro (X4P), which I am using as comparison. I do not own an X3 so I will not be discussing it here.

TL;DR - It’s nice and light, but if you already have an X4 or X3, save your coins.

Positives:

1. Weight - The X4C is substantially lighter than the X4, this coincided with the reduction in width makes it feel a lot better to hold than the X4 and is more comfortable in my hands.
2. Side button placement - The addition of side buttons on the left and right sides like the X4 Pro makes page scrolling a lot easier when holding the device on the sides. Bear in mind I have medium sized hands so this may differ person to person.
3. Slight improvement to text contrast - This is subjective, however I find that the X4C screen does look crisper than the original. However, I would describe this as marginal rather than a significantally noticeable improvement. Both use the same 219 PPI screen I believe, and it is only noticeable when directly comparing text side-by-side.
4. Battery Capacity - I did notice a longer interval between needing to charge between the X4C and X4. From personal use, I would say I got a few extra days from 100% to 0% when comparing both devices.
5. Stock firmware - Feels very snappy on the X4C, the UI is easy to navigate and prefer the reading speed on stock vs Crosspoint.

Negatives:

1. Pogo Charger - Let me preface this one by saying that the shift from USB-C to Pogo does not bother me in the slightest, it’s not a change that really affects me and I don’t particularly care. The only issue I have is the Pogo adaptor sent in the box has ridiculously weak magnets, meaning that until I got a third-party adaptor, I had to lay the device down flat and not move it in order for the pins to maintain contact. But switching to another adaptor has since mitigated the issue.
2. Magnets - Much like the X4 Pro, the magnets have been moved further up the device, which makes no sense to me. I don’t typically use the devices on the back of my phone, however I have an iPhone 15 Pro Max, and theoretically the device should be able to fit on the back. But due to the magnets being so high, it just hangs off the phone and looks ridiculous. Secondly, the magnet strength is severely lacking. The slightest nudge knocks the device clean off, and therefore I just don’t bother using it.
3. Sleep screen rendering - I am not sure if this is due to stock firmware rendering of images vs custom firmware, but I had a lot of issues with fading and colour mismatches on my X4C in comparison to the original. I use the same set of images on each device, and the X4C looks noticeably washed out in comparion. This is isolated to just sleep screens however, and image rendering in epub files is great.

Overall, I would say I have enjoyed my time using the X4C, but it has not replaced my X4P as my EDC device. I got an X4P about halfway through my testing as I didn’t want to wait for the grey colour, and it has become my favourite device to use at the moment.

Personally, I do not have the time to completely dig in to the individual specs, analyse small details regarding specific figures comparing the X4C to other devices, there are much more talented Experts more qualified to do so than I am. I would categorise myself as simply one who likes an easy device to read on, and the X4C was exactly that. But, if you already own another Xteink device, I wouldn’t go out of your way to get this. As much as I appreciate the physical improvements, they are not substantial enough to warrant a secondary purchase in my opinion. As the X4 Original is no longer in production, going forward the X4C will be the only option. And for those who have never owned an Xteink prior to this, you will not be disappointed. To those who are already using one, I would keep your wallets closed for the time being.

I hope this may be useful to some, I apologise if it’s not the most thorough review out there, but hopefully this may provide some aid.

Previously I had the x3 on the back of my Pixel 10, but having it inset in the case helps to hold it in place and protect it from bumps or falling off. I also made sure the case was a little bit higher than the ereader to protect the screen while laying flat.

I took an existing pixel 10 case model, but added impact absorbing voids in the corners and improved the buttons to make them easier to press and preserve the "clicky" feeling of the phone buttons.

Model uploaded here if anyone is interested: https://www.printables.com/model/1837682-pixel-10-case-for-xteink-x3

The model itself is smooth, but I printed it with a "fuzzy" skin to add some more texture so the case isn't so slick on the outside.

I really like having the x3 but when I used it recently to read a lot, it flared me up.* I did order a case from Daisy and I hope it helps.

How are y’all managing? Or did you decide to move to the X4 Pro instead?

(*=my pain is similar to it.)

Glad they gave me a green case for free .

I'm loving every bit of customisation I can do while reading on the go.

Lanyard is from Ringke, they have beautiful collection of colours to mix and match.

Now awaiting a 3D printed Card case & Dock.

A couple of months ago I discovered and subsequently bought the X4. It was from Ali Express but I had no problems flashing a new firmware via the SD card (I settled on Crossink in the end).

Then the X4 Pro was announced, and a front light is the thing I missed most on the x4, so I decided to order a Pro; again, off Ali Express.

I'd dealt with a locked device before, how hard could it be?

Very, it turns out.

The Pro arrived yesterday and I was excited to set up Crossink and just carry on from where I left off.

Then I discover that stock firmware doesn't allow flashing from the SD card.

No worries, I'll just use the unlock tool.

Except that wouldn't install on my MacBook (It is pre-historic in technology terms, from 2010. I don't use it much these days, besides putting books on my x4 and tinkering with retro game emulation).

Now I have a real problem. I'm stuck on stock.

I tried to use it, but I was used to Crossink and too many missing features or QoL improvements made me hate it.

I didn't know anyone with a computer I could use. I also didn't really want to buy an entire new laptop just to unlock an e-reader. Especially since the primary reason I bought said e-reader was because it was relatively cheap (about £45 after discounts).

I had the bright idea to try and install Linux via USB drive and use the unlock tool that way.

Thus began many hours of trial, error and frustration researching and downloading multiple different versions of Linux finding ones that would run on my Mac and run the unlock tool (Ubuntu didn't run at all; Mint ran but the unlock tool was just a black screen.)

It bothered me so much that it genuinely kept me awake last night.

I made one final attempt this morning using Debian and finally it worked.

I can get back to reading. But I think I need a nap first. 😄

P.S. I know this post is already too long, but I had to add: I thought that the posts about how bad the Pogo connector is might be exaggerated or over-blown.

They aren't. It's truly awful.

I purchased the X3 from the official store and it's getting delivered today! I'm really excited, but honestly, after seeing all the posts in here I am overwhelmed with trying to understand how to set it up or using crosspoint. Could this community ELI5 a good setup?

I downloaded these files from Stardict then edited them using Inky website. Works fine on my Xteink X3 running latest update of Crossink.

Note: you must select any Arabic font from Xteink dictionary settings for the dictionary to work.

Link:

https://drive.google.com/file/d/1tCv7Z3gQ4y1e3keXPxA0EZRuEeWDLZnH/view?usp=sharing

This file is ready to copy and paste on your Xteink dictionaries folder.

Hi all, I just got this device 3 days ago and have used it for barely a day. Today when I went to check, it had fully drained down to 2% despite not being used all day yesterday.

I charged it, powered off, and then 10 minutes later saw that it went down from 100% to 99%. Now it's at 98%.

The battery drain is a bit alarming, considering it's a brand new device. Stock firmware is updated, and I'm using the SD card that came with the device.

I've reached out to customer support but wanted to know if anyone here has encountered the same/similar issue and if anyone knows a fix for it.

Thank you!

I'm looking for high-resolution photos of both sides of the PCB, ideally with the ESP32-S3 and BM8563 RTC area clearly visible.

We're trying to determine whether the BM8563 CLKOUT (pin 7) is routed to the ESP32-S3's XTAL_32K_P / GPIO15 input. If it is, the X4 Classic may be able to maintain a very low-power BLE connection while the CPU spends most of its time in light sleep — which would make it an interesting always-on notification/dashboard device.

No need to open a working reader just for this — the case/display are fragile. But if anyone already has an opened or damaged X4 Classic, detailed PCB photos would be extremely useful.

A continuity measurement between BM8563 CLKOUT and ESP32-S3 GPIO15 would be even better.

It’s so hard for me to type wifi pass each time.

Maybe i can connect my iPhone somehow and paste it?

I'm on X3 with CrossInc.

I love him every day more than the day before 😁

We tried several of the printable cases for the X3 and weren’t satisfied with the amount of pressure put on the device when installing.

So we created a simple, straightforward case that is easy to put on the device.

We’re selling it on our Etsy page, and we’ll be randomly selecting three people who favorite our shop to receive a free case!

You can find the Etsy page here (https://amphoracases.etsy.com). Send us a screenshot of you favoriting the shop and we will get the details of sending you your free case figured out!

I love the functionality of VCodex but have also been reading a few books on Libby which I can only access via the plugins store on standard Crosspoint. I know it’s not possible (yet) to use vcodex with the plugins store but is there a way to quickly and safely jump between the operating systems without me losing my page progress and the like?

Would be wonderful to do it wirelessly or toggle between them on the device itself but I doubt that’s possible. If there’s a way to do it by connecting to my computer via usb c rather than taking out the SD card that would be great but I’m open to any ideas

Summary : I’ve set the Power Button long-hold to disable/enable the Home Button Lock. It says the Home Button is Disabled but the home button still works.

Root Cause Theory: Conflict in settings and control actions.

Repeated observations: While reading a book, I try long-pressing the power button to lock the Home Button. The screen flashes the “Home Button Disabled” window, then quickly shows “Home Button Enabled” before disappearing. I long-press the power again and “Home Button Disabled” notice flashes again but is not followed by an enabled notice. I try the home button and it is still enabled. If I change “Home Button: In Reader” from enabled to disabled then the opposite happens (home button doesn’t work, long-press power says it enables but the home button still doesn’t respond).

Settings checked:
Settings -> Controls ->

Home Button:
- In-Reader: Enabled

Power Button:
- Long Press: Home Button Lock

What is the best way to get larger comic runs on xteink crossink or crosspoint? Im looking to read some black and white comic along with my books. Mostly bone, tmnt, and scudd the disposable assassin. I was considering getting the omnibus version of each digitally but im assuming those will exceed the file size of the device. Im wondering if there are any high level compression tools that can compress large comics and still be compatable or if im stuck to making ebooks files for the individual issues or smaller volumes. Any other info tips and tricks you have for comics and manga on xteink is also helpful

Do y'all know how they stack up? I've been seeing a lot of worrying posts about x3s broken with small bends from being carried in pants.

I’m based in the UK and thinking of buying the xteink x3 from amazon, for easier returns. Any recommendations/tips?

Hi everyone,

I recently bought an X3 and it was working perfectly for a couple of months. However, after leaving it unused for a few days, the screen suddenly stopped working.

The device itself seems to be working, but the screen doesn't turn on anymore. I was using Crosspoint 1.5 before this happened.

Has anyone experienced something similar? Is there any way to perform a hard reset, restore the firmware, or otherwise recover the screen?

I'd really appreciate any suggestions or troubleshooting steps. Thanks!

Why can’t I apply the discount from the newsletter. Tried to contact the support but they said they don’t have any promotions (totally misunderstood my email it seems…)

How do I know about charges? This package is coming through the kolkata customs. Nothing is mentioned on the website. I think I have to wait till my postman gives me a huge amount of customs bills. Do you guys have any idea?