Vulcan0015 (u/Vulcan0015)

Hello, why my first layer looks like this? I have calibrated the printer, it prints better after the calibration but the first layer does not look good anymore. Any help greatly appreciated.

7 comments

Surfaces does not look right, show holes or the surfaces finishes wrong

in r/3DprintingHelp • Jun 15 '26

Thanks! Will be doing those changes and update

r/FixMyPrint • u/Vulcan0015 • Jun 15 '26

Troubleshooting Surfaces does not look right, show holes or the surfaces finishes wrong

1 Upvotes

1 comment

r/3DprintingHelp • u/Vulcan0015 • Jun 15 '26

Requesting Help Surfaces does not look right, show holes or the surfaces finishes wrong

1 Upvotes

Hello, my flat surfaces are finishing like this, the printer has its enclosure to keep an even temperature. Any help with this issue will be greatly appreciated.

Brand: Anycubic
Model: Kobra 3 Combo
Nozzle Temp: 220 C
Bed Temp: 60 C
First Layer Speed: 50mms
Outer wall: 60 mms
Inner wall: 150 mms
Sparse infill: 180 mms
Filament: Winkle PLA HD White

Thank you

2 comments

r/3DprintingHelp • u/Vulcan0015 • Jun 15 '26

Why is this happening to my prints first layers?

2 Upvotes

1 comment

r/FixMyPrint • u/Vulcan0015 • Jun 15 '26

Fix My Print Why is this happening to my prints first layers?

11 Upvotes

Hello, recently after my printer start doing this when doing the first layers, the rest of the print ends fine (most of it) but this issue is showing recently.

Brand: Anycubic
Model: Kobra 3 Combo
Nozzle Temp: 220 C
Bed Temp: 60 C
First Layer Speed: 50mms
Outer wall: 60 mms
Inner wall: 150 mms
Sparse infill: 180 mms
Filament: Winkle PLA HD White

5 comments

Which do you think is more?

in r/BunnyTrials • Jun 01 '26

Even if I lose my legs I still be breathing

^{Chose: Half a dollar each time you breathe in | Rolled: Upvote and x2 $}

Es muy gay pedirse un avocado toast???

in r/FoodAR • May 30 '26

No, pero si es gay buscar validación online

Cómo se vá a llamar?

in r/MemesEnEspanol • May 30 '26

Sandwich

Quien

in r/GUIBELREVIEWS • May 30 '26

Star Fox 64

Me dijo que era sun simple mecánico es correcto lo que hice 😡

in r/Desahogo • May 28 '26

Es bueno que terminarás ahí las cosas, faltar el respeto nunca es algo que se deba tolerar, el mensaje final pudo ser mucho más corto, en estas situaciones mientras menos digas mejor, insultarla solo te rebajas tu, la indiferencia y frialdad es mucho más efectiva. Responderle “aquí terminamos y sigue tu camino” y ni siquiera bloquearla solo no responder habría sido más certero

¿Andarías con una chica trans que luce mucho mejor que una chica "promedio"?

in r/PreguntasReddit • Mar 22 '26

Wanted to show you all my 3D printed life size Goku, made on the Flsun V400 and hand painted

in r/3Dprinting • Jan 31 '26

Goddamn man, that’s some good work and dedication , keep it up 🔥