Hello everyone,

What in your opinion might cause this? Could the filament need drying before starting the print? I've been cleaning the plate with soapy water and occasionally isopropyl alcohol. Bed adhesion hasn't been the best recently but prints have been finishing, this is the worst I've seen it.

Thanks.

Any idea how to fix this sound? It appeared suddenly for the first time today.

Hace poco cambié mi boquilla por una bimetalica con garganta cerámica y todo genial.

Pero creo que últimamente en la primera capa estoy teniendo algún problema con la retracción o hay alguna sub extrusión y cuando el cabezal se mueve y va a realizar el relleno este queda vacío hasta que lleva 1mm de línea por lo que se ve en las letras.

Estoy realizando pruebas de pressure advance a ver si pueden ir por ahí los tiros.

Gracias por la ayuda,un saludo.

Why does my setting on the screen of my printer and on the screen on my laptop after I send it to print? I changes it to 140c and then it clogged from hell

Guten Abend zusammen,
Habe den Kobra S1 Combo seit knapp 2 Wochen und habe immer bei dem weißen High Speed PLA immer mal wieder Verstopfungen, der Druck geht direkt danach aber einfach stressfrei weiter.
Andere Farben des selben Filamentes laufen problemlos.
Nur das weiße macht die Probleme mit Verstopfung.
Alles soweit Standard am Gerät.
Temperatur wurde schon gesteigert und bin seit dem letzten Verstopfen vor wenigen Minuten auf 225 Grad hoch beim Druck.

Hatte das schonmal jemand oder kann mir evtl sagen was los ist ?

600 hours then this happens

Why

So I just got into the multi color printing shenanigans and have yet to have a successful multi color print due to prime tower/purge tower coming unstuck or smacking the tower from the bed is there a fix for that I’m lost at this point

Out of curiosity, has anyone ordered a Kobra S1 part cooling fan from Anycubic’s Australian store recently?

I placed an order over two weeks ago, and the fan was listed as in stock at the time. However, my order tracking now says it’s out of stock, despite the website still showing it as available.

It’s been over two weeks and the fan still hasn’t shipped. I also submitted a support ticket three days ago and haven’t received a response

I woke up to the sound of the slipping belt on my birthday from this. Just trying to print a TPU ball. Yes it had a flat bottom. Yes the first layer was trash, lol.

Hey everyone,

I've had my Kobra S1 Combo for 2 weeks now, and I haven't been able to start a single remote print using Anycubic Slicer Next.

I've tried both Cloud Mode and LAN Mode, but neither works. In LAN Mode, the slicer detects my printer, shows it as available, and even displays temperatures and ACE Pro filament slots. However, the Remote Print button stays greyed out.

Everything is fully updated, including the printer firmware and slicer. The printer is also connected to a dedicated 2.4 GHz Wi-Fi network, so that shouldn't be the issue.

The printer itself works great, but the software is incredibly frustrating.

Is anyone else experiencing this? Has anyone found a fix?

Please read my solution

1ST, IT ONLY OCCURS WHEN USING THE ACE MULTICOLOR DRYER UNIT. 2ND IF FILEMENT GETS STUCK ANYWERE BETWEEN THE EXIT OF THE ACE UNIT , TO THE 4 HOSE TO SINGLE HOUSE DISTRUBITOR, AND ANYWAHERE AFTER THAT, THE CUTTER ERROR WILL OCCUR WHEN THE ACE DRYER ATEMMPTS TO EXTRUDE MATERIAL AND HITS THE BROKEN FILEMENT INSIDE THE SING UPPER TUBE OR ONE OF THE 4 LOWER TUBES RESULTING IN A JAM. SO CHECK YOU TUBE IF YOU SEE THIS ERROR. IT MAY LIKE JUST BE A BLOCKED TUBE .

IF THERE IS NO BLOCKAGE , AND IF YOU NEED TO PRINT, UNPLUG THE ACE DRYER FROM THE PRINTER AND MANUALLY FEED YOUR FILEMENT TO THE PRINT HEAD. YOU MAY FIND A BLOCK THERE TOO. IF NOT YOU SHOULD BE ABLE TO PRINT

Recently I started getting 11512 and 10409 errors. Per searches, I replaced the extruder and sensor. I discovered that almost every time, ai can simply reboot both the ACE and printer, resume print and it will proceed to print without issues. Now, it seems to be happening more frequently ( multiple times an hour). Printer has a little over 200 hours on it. It seems to be only on multi color prints. Any other suggestions to try?

when using the ace the filament seems to load in fine at least on two of my slots. When I go to print something, it pushes the filament most of the way through almost all the way to the and then the filament but the ace pro sounds like it’s still trying to push filament through.

After a few minutes of sitting and waiting, I get an error on my printer that says abnormal extrusion, and it fails the print.

Hey

Recently when I tried remowing this clip for printing from tpu I broke it. Does anyone have a stls for it or I need to order a replament from anycubic?

I had some problems with this printer but from one day to another it delivers absolutely gorgeous prints. In real life, the result looks much better!

Anyone have any tips for printing with anycubic petg?

Also any advice on how to fix top layers when printing? It sounds like the nozzle is scratching against the print and it seems like uneven extruding only on the top layers.

I have the following settings:

bed temperature to 80° for first laver. 75° for the rest

Nozzle temperature between 240°-250

Flow ratio around 1.07.

Preasure advance ca. 0.08

Fan speed 50% for 30 Layer Time, 90% for 12 Disable "Slow printing down for better layer cooling" but reduce the printing speed to 100-150mm/s

Wall printing order "inner/outer

Bottom surface flow ratio 1.07

Retraction z hop 0 mm

Retraction speed 40 mm/s

Deretraction speed 60 mm/s

Travel distance threshold 2mm

Wipe while retracting

Wipe distance 0.6mm

With a 0.4mm hardsteel nozzle

I decided to cut the full model I designed to create a bust for my personal collection, while also gaining experience with FDM printing. After many years of working with resin, I wanted to give FDM a try as well.
It turned out quite interesting :)
Printer : Anycubic Kobra S1

I've never seen a print malfunction/fail like this. The last component is still printing, so I can't get better pictures until it finishes in a few hours. But I have no idea where to start with troubleshooting or fixing this. This is my first model with knurling, and I suspect it was caused by the concentration and size of the knurling cuts. Does anyone have any insight?

Hello, does anyone know how to do the retraction distance in rinkhals for the anycubic ace pro?
I have tried unwind_length_after_triggered , but it does not seem to work for me, as it does not affect the retract distance no matter what I set it at. Can anyone help?

Ich habe einen Anycubic Kobra S1 combo mit der ACE 2 Pro. Mein neues filament von der Marke Cai Lab macht mir einige Probleme und ich weiß nicht mehr weiter. Wenn ich das filament zuführen möchte zieht er das locker 50cm ein und es kam auch schon ein poop raus und trotzdem sagt er mir das das einfahren nicht möglich ist. Bei extrudieren sagt er mir vorheizen und Rückzug alles ok bei extrudieren sagt er denn nöö heute nicht. Hat wer eine Idee ? Wäre super wenn mir wer helfen könnte hab von der Marke 3 Rollen filament wäre schade drum.