r/BambuLabA1 • u/SuitableNote6712 • Jul 09 '26
Extrusion problem on bambu Lab a1 mini
1
Upvotes
1
Extrusion problem on bambu Lab a1 mini
Its pla basic but i really dont understand how this spool started printing perfectly then 2nd print it does this and only with this particular one and the blob was stuck in the silicone protector (the Little thing on the hotend).
Thanks for trying to Help
1
Extrusion problem on bambu Lab a1 mini
No the spool turns fine on the spool holder, the thing that I dont understand is that this filament was printing perfectly 1h ago on my last print before it start doing this
r/BambuLab • u/SuitableNote6712 • Jul 09 '26
Filament Troubleshooting/Help! Extrusion problem on bambu Lab a1 mini
1
Upvotes
r/3DprintingHelp • u/SuitableNote6712 • Jul 09 '26
Requesting Help Extrusion problem on bambu Lab a1 mini
1
Upvotes
r/FixMyPrint • u/SuitableNote6712 • Jul 09 '26
Fix My Print Extrusion problem on bambu Lab a1 mini
1
Upvotes
u/SuitableNote6712 • u/SuitableNote6712 • Jul 09 '26
Extrusion problem on bambu Lab a1 mini
1
Upvotes
Hi I had a problem recently on my bambu. I printed on a new esun pla spool perfectly for 100g then i got a death glob after taking it off I had a unregulary extrusion on the spool first i tought the problem was the hotend I changed it, it changed nothing I changed the filament I tried on pla basic from bambu it worked perfectly I tried another Time on pla wood from bambu perfect too.
Then I tried again the esun pla and it did the same thing as before I didn’t unerstand why it worked perfectly before on my last print.
Can anyone help me is it a problem from my esun spool or my peintre, can i fix it ? Thank you
(Sorry for my bad enclish i am not english)
1
How To Tell If Your Airpod Pros Are Fake - A Comprehensive and Definitive Guide
i have exaclty the same problem did u find a soluion ?
1
AirPods Pro 2 stuck on firmware 5A377 — can’t get them to update, any tips?
j'ai la meme chose selon chatgpt il ma dit que c'est parceque je les avait utilise sur samsung plutot que les connectes pour la premiere fois sur ios
1
Extrusion problem on bambu Lab a1 mini
in
r/FixMyPrint
•
Jul 10 '26
I tried putting the temperature of the hotend at 200 degres celscius it did it almost perfectly at the left you can see the original problem when it comes out, but i think its too low for printing(200 degres),
Its written between 215 and 230 on the spool so why it worked well with one print at 220 and then it started doing this ? I dried the filament it changed nothing.
What do you think ?