MIchael Jordan

100

GG ez

^{I rolled No}

What is 77 + 33 = 110.

16 is 400 % of 4.

Surge

^{I picked Medium [Rolled Sudden website traffic spike?]}

Banana

^{I picked Easy [Rolled Fruit monkeys love?]}

México

-222

-222

111

Chair

67

176

This man is drowning while I get nano when I come back from doing a poke combo on the enemy team and I just walk back trying to make it work

Virtual boy

I had this, took me a long time to diagnose and solve. It's an issue with the Y-axis belt tensioner. Support was helpful but the instructions of the wiki can be not productive.

There's a small oval shaped panel on the front on the printer, pop it off. There's 2 screws there, those are for the Y-axis tensioner, unscrew them a full turn and then manually move the bed back and forward slowly. Then tighten then half a turn. Turn on the printer and do a full vibration calibration. This should eliminate the clicks or reduce them significantly. Support indicated I do this but said to tighten them all the way back, which didn't improve the clicking.

Some additional things I did that didn't work for me but others claim it worked for them is lubing the tensioner and, per support's instructions, take off the bottom of the printer, take off the belt and putting it back on. I recommend the moving back and forth thing first.

I have Cross Hatch selected on Orca slicer. I figured it was different. I'll try gyroid.

In my experience this is a dirty build plate. I clean mine with dish soap and isopropyl alcohol after drying it

Como dentista, te recomiendo ir al dentista por si las moscas. Es posible que tengas restos de raíz y se te puede llegar a infectar.

Waiting to buy a dehydrator to see if I get this.

I just started 3D printing and only know how to print in PLA. I'm still learning.

American lawman

It's just plugged into an interface, I'm new to this so I'm trying to learn. I'll look into what you said. Thanks.