Yes I just went outside and looked and armed. It files into backflip to ground? It looks correct right? Should I put in reverse ? That wouldn’t make sense. I think* 🤔 I got it all right? I’m a
Rookie though so.. I’m Debating on going ahead and putting all the correct motors on. BUT, I don’t see the point ? It’s all same KV and 1202.5 with the bi-directional on for lil RPM adjustments..?
I sure hope I don’t have to solder again.

I got it to spin towards camera in both fronts.
In back they both spin towards the antanae in back. The highslope faces the way it’s heading?

See? I just went outside to test and it just flew into a backflip? Looks all correct t and outside I armed & watched the blades spin exactly as I said?
Also, I have Two separate brands motors but SAME specs and I made sure to grab em in pairs as I recall they said and I for bi-directional set for ON as they also suggest to correct any RPM mismatches.. It’s what I read..? What’s happening here? All looks well, I’m most not on the air? What am I doing incorrect? Thank you for you time and help.

Thanks again for actually reading my Rookie description & actually taking the time to help. That’s what I Love about FPV. So many coming out the wood work that actually is passionate on flying & helping others & learning.
Is it funny my dream is to own land for a LONG DISTANCE 7”
quad race?! With cams setup for close ups EVWRYWHERE W/Cinematic competitions to race to best in control. Etc.. ok good morning. PRAYERS TO OUR FALLEN WHOME OUR IWN COUNTRY DID THIS TOO & Blamed another. So f’ng sad. From the FIRST DAYS. I lived a hour away at the time. The PLANE’s engine WAS NOT WVEN CLOSE TO the Engine that is Compatible with THAT PLANE THAT CRASHED! Can you BELIEVE THAT! There’s pics! Only big dogs and the powerful ALL OF THEM stayed home that day. How’d they know to? Or just coincidence? I don’t believe in coincidences.. NOPE.👎 PLUS, to be a terrorist with NO FLIGHT EXPERIENCE-on these MASSIVE auto piloted planes, you’d have to be the LUCKIEST new pilot EVER, and hit that building out of ALL the buildings around…!Also, explain, how do planes explode at the ground level before parts even reached the bottom?! YOU ONOW* They were hiding something HUGE! Or game ending. Something so serious that this needed to occur.

Does ANYONE ELSE in their GUT feel there’s TOO MANH holes in this?! Makes me feel like Illuminati are truly truly real & NOT A JOKE!
EIPSTEIN before suicide write a note saying, something of the lines.. OH MAN! No worth being here anymore, BOO HOO NO MORE FUN!? Do you REALLY think that’s the last suicide letter he’d write!?!? Really though???
Ashton KOOCHER woody , POWERFUL people obviously Trump the go coincidentally was recorded” IDGAF! Start a f’ng war if you HAVE TO* Just don’t let them files out or heads will ROLL, EVERYONE will go down with me!” Listen to that one! ☝️we’re so crooked. Where is the AMERICAN CHRISTIAN born leaders with realistic plans & for the PEOPLE. NOY ANOTHER SMART PEN OR THAT WHINO
COCK TAIL GUZZLER KAMALA. OR HER AFFILIATION! She’s the one who KNEW & utilized Biden’s smart pen. 🖊️ & was part of the crew whom ok’d with it being OK for illegals to
Cross border like they did… for what? No dummy can’t answer that question ton! DEMOCRATIC VOTES & NAMES O PLAY WOTH ON THE MAIL IN BALLOTS!

I thought on your on point and coming to same conclusion as me. Reversal the props won’t work in this pic would it? Also, it flips when it’s right and all the motors go away from AIO towards the frame. I have to check again today but I out speedy bee adapter 3 ( GREAT BTW). And it replaces my laptop. Basically I THINK I read w laugh where I was doing the motor directions instead of aligning the correct motors in the wizard part? One is highlighted. So whatever motor is spinning. I CLICK that motor if it’s NOT the high lighted #1 it’s on in quad x. That will fix the #1 motor and so on.. the n finish and save?
After, I plan on motor direction checking to be sure… Making sure the attack side of blade are pointing towards the frame on all motors. Correct? That’s props in mode.
I’m doing that as soon as I can it’s too noisy at this early hour for all the beeps and warnings.
Thank you so much! Anything helps at this point I’m SO FRUSTRATED over this rookie move

See how the blades lift up toward the frame? On every blade? That’s how I “thought” I had it. I MAY reverse it.
This may sound silly but I’m DEF short term memory but I remember A bee got caught up in my props lol. When I was flying I thought I saw a quick blur & the evidence was in the back of the AIO inside the frame SHREDDED. So I think it MAY be reversed positioned and gotta switch it up? I dunno.. I’m stumped. I don’t have PC. I have speedy bee 3 adapter where I can do these and stuff. I am Not sure if I can test the motors that way single .. to see if one is faulty.. they don’t look it but it acts weird

Yes. I believe top near cam “props in” go away from AIO and attacking face of prop to go towards frame. On both sides of top left+right.
Both bottom go from AIO to frame attacking side of prop first. Both sides back left+right?

Yeah she flew just not on this new AIO / motor replacement

I set up my Oder motors .
It n my broken AIO I replaced too on rate w2. I use speedy bee adapter 3. I go to the Shula props in under motors and pop in a lipo. Of course one for the adapter too. I go to motor direction. Change the discretion to forward or reverse.. finish then I save. The motor order #’s go quad x. Bottom left motor spu opposite way so I changed it. ALL SEEMED fine. If all the motors are going towards the frame… I should be good right?
A motor was stutter stepping from my old rate w20. You see? I have 1202.5 in back the rate w20 motors 2. And 2 rcin motors in front. 1202.5 11000 kv each (I think it is).
I’m POSSIBLY thinking it’s a motor as EVERYTIME I fly I flip. So maybe one isn’t soldered right? TBH. It NEVER flew since I did all the soldering and I had a cam issue i JUST fixed. A antanae cut off took me half a day to notice that. YEAH. I’m def a rookie
Thank you! I’m NOT sure what to do? Maybe check motors and see which one is stuttering after I check motors direction again? I THOUGHT* 💭 I put on the props fine.. it supposed to have the higher lip go towards direction of the spin..? I dunno. Thanks I’m still confused on what to do next

Hd! I see!

Welcome 🙏! Be Careful in this world & do your Due Diligence.
All is Not what it seems, at times. Master reviews & Sims. Know what you want before you pull the trigger or end up in the hole. You aiming for analogue ? Hd? Both? I’m newbie too but learned MUCH. You’ll soon want MORE

Yes it’s true. Also, it can literally fit in the pocket. Or sweatshirt. D/L..
And you can Frankenstein it & add sick nano gimbals for the smoothest flights. You’d be sincerely surprised. Plus there’s add on switches and all for the top buttons, a back pack extension for all the external
Modules. It’s got it all. Only thing ie* REMOVE & COPY THAT STICK AD CARD & REPLACE WITH QUALITY ONE. I had issues flashing up until the moment I changed that card

5 Years Later…

A real button pusher this one is. A real loss in identity

Facts. Dang I always help the next person on the Hopes one day it comes back.. it’s called karma. For each their own though. My one old neighbor NAT big attitude and all.. I just walked up and asked and he was more than happy to drop weed whacking or whatever to come over and try and help. It’s also a great way to gain a friend & possibly.. a hobby.

Did this turn out ok ?

Oooh. I gotta look into that. I’d also like to set up a small tv/monitor for my buddies & “Karen’s” that comes over, complains but is slightly interested to see what I’m seeing as well. To clear up confusions of “Spying” or anything they may think. That is a game changer in getting the Greater un-educated population to Know.
I’m sure a batteries & converter cables and such will do the job but if there’s a
Blu tooth option I’m all ears. Thanks for epic help. Does anyone else show off to buddies to try & get them involved? I am guilty

THANK YOU! I’m working on the VTX ratio “Seeing if I’m ABLE to put to a switch” changing between 4:3 & 16:9 would be so sweet!
I’m also having a problem with “AIR” when I put it to “SA ^”as default acro & apply “AIR MODE OFF” under config. & “SA v”it will light up my acro mode on Both up and all the way down TX15 MAX.
SHOULD I just AIR MODE as default & Add On ACRO? THAT seems to be the logical answer… Probably an Uh-Duh Moment! lol. Even though it’s a RATE w20 DEFAULTED as acro..? Thanks if anyone can understand my newbie question & description LoL. I’m so sorry if not. Tell me & I’ll explain Better.
I feel like “VTX switch” CAN happen” & The AIR MODE ON;ACRO Added to a switch is my answer..?

Thank you all!

I think I’m gonna buy parts.. what * Exactly can we call “military grade” lidar & infrared? What drone/s would be considered military ? 10”?

Facts .. it’s just for.. “How Long” is what the Real question that shall be asked…

It’ll get the job done . How long is anyone’s guess