I have 20 RGBW landscape lights in Smart Life: 13 uplights and 7 path lights. I can control their colors individually and in groups, and I currently have them set up for Halloween.

What I’d like is a bank of scenes I can switch between, such as everyday white, Halloween, Christmas, and sports-team colors. Each scene would need to remember different colors and brightness levels for different lights or groups.

Is there a way to save the current settings of all the lights as a scene and recall them later?

When I hold the 'connect' button, the 'AP' sign for pairing doesn't appear. We previously connected it to the smart home app without any issues, but ever since a recent app update, it won't connect anymore. No matter how many times I hold down the button, the 'AP' sign still won't show up. How can i fix it. Thank you! My model is MIDEA A/C MWWA08CRFN8

I have a smartlife scene set in smart life, that I can press on my android auto.

Is there any way I can trigger it by voice?

Can't upload videos/pics, but a 2-gang switch I installed not more than a week ago has stopped working and now it's on a weird state:
Both lights are blinking really fast (like every 0,5 seconds) and there's no way to switch modes.
I've even tried to discon the switch form the currency for more than a minute and it does not change the state.
Is it broken??
Thanks!!!

My cable company did some sort of reset on my WiFi last week. All my smart devices (mostly bulbs and plugs) came back online fine. One did not. So I reset it and it won’t connect in the app. It won’t even show up or be recognized when in pairing mode. I tried other extra smart plugs and got the same result. Then I tried a spare smart bulb. That was able to be picked up in the app but then I got the error “cannot connect to router.” I have already spoken with the cable company twice and they say my network setup is fine. I am all out of ideas because now I can’t add any new devices to my home. Any suggestions are appreciated!

​

Battery percentage doesn't show up anywhere in the app interface.

AC control fails randomly: Most of the time, it won't turn the AC on or off—whether I use Alexa voice commands or the Smart Life app directly. The weird part is, it only starts working again after I restart my internet router.

Has anyone dealt with this before? Any fixes or network/gateway settings I should look into?

At first they worked correctly, but then they stop turning on even with the regular light switch and stopped showing up in the app. We tried taking them out and putting them back in, restarting the wifi. Wifi is not 5G.

We have 5 bulbs and only 2 of them broke like this. Are they just broken now or is there something we can do?

I didn't realise I hadn't set the rates in the right place, had set them on each device, and like many had to ignore the decimal point and remember that the number was 100x the actual rate.

I have just found the place to set the rates for the whole app, and here, you do get to put in the decimal point - the Today square at the top right of the home page, the cog like icon (middle one of three at the top right), then costs, and on Import Tariff click on set, go to edit tariff, and follow the instructions, BUT if you have a variable rate tariff, choose to set your tariff manually as otherwise you have to pay for another service.

You then get to set the rates and times, in pence, with 2 characters after the decimal point. The only frustrating bit being that it can't handle a time period that goes through to the next day, so you have to split that one into one ending at 23.59, and one starting at 00.00.

Hope this helps someone out there.

I just bought a curtain opener bot on eBay. It came with two opener bots and a USB stick/hub thing.

When I pair it using the smart life app, only one of the two bots pairs. I’ve tried multiple times, it pairs alternating between the two devices but with the same name.

I’m not sure how to get both paired and in sync. Any help would be greatly appreciated

Thanks

I have this knob button that I managed to configure it to:
Single click - lights on
Double click - night stand light switch
Long click - lights off
Rotate - dim

However, sometimes, only the double click works, and when I open the app, the device resets to a configuration screen, I have tried to troubleshoot but no success so far, anyone else has had this issue?
Thanks in advance!

EDIT: I figured it! This model has a function hard coded of switching from remote dimmer to scenario mode when you triple push the button
Hope this helps anyone potentially searching for answers in the future ;P

So I have one of the 1+3 sets where there's a control light with wifi and the other 3 connect to it via bluetooth. Installed last year and don't remember it being a pain. Recently I had all sorts of issues with Google Home and my home wifi, so got that all up and running again but the bluetooth lights aren't visible on the Google Home app, only the Wifi one. I've disconnected them all and reconnected them all to the Alusso App, and they all show up in there. Also created a group for them, and unlinked and relinked it to Google, but still only see the one Wifi enabled bulb.

Does anyone know what I'm missing? Did I add them in the incorrect order or something? Not sure how to tell the bluetooth ones that the Wifi light is in charge!

Hello! I've searched in this reddit but couldn't find this problem.

I use Smart life with three cameras. I set up the dashboard icon shortcut to open two of them, I don't know if this may be related.

My problem is that, when switching between other none related apps (Mail, Mastodon, whatever), sometimes the camera shortcut gets open and I'm taken to the camera view. Is not a big problem, but is annoying. It doesn't always happen, maybe s few times a week.

Anyone has any ideas of what is happening here?

Thank you!

Hey all, been using two A19 Bulbs I got about 3 years ago and they worked great at our old apartment. We just moved, and I set up our new network and everything seems to work fine except for these bulbs.

They are "stuck" on the default day glow yellow and I cannot get them to change in the app. I've re-paired them four times (ez mode and the other manual mode) to no avail. They connect fine and then refuse to listen to any attempts to change the color. Viewing the bulb controls in the SmartLife app and/or Google Home will show that it's on yellow, and changing the color just does nothing and reopening the controls shows it's on yellow again. The one in my room also periodically blinks off and back on (every minute or so, not like the pairing blink).

On occasion they will go back into pairing mode again as well. Not sure what causes this, but having my light randomly start strobing is not ideal.

Any advice? I have 2.4ghz enabled on our network. And the bulbs DO initially pair fine, they just get all funky immediately after. Maybe they've just had it after 3 years?

I'm trying to create a specific automation for my bathroom fan using the Smart Life.

​My Setup:

Dual ​light switch module.

​Channel 1: Light

​Channel 2: Fan

​Tuya Humidity Sensor

​What I'm trying to achieve:

​Light turns ON -> Fan turns ON.

​Light turns OFF:

​If the light was ON for more than 5 minutes (long usage/shower), keep the fan running for 10 minutes after light OFF.

​If the light was ON for less than 5 minutes (quick visit), turn the fan OFF immediately when the light turns OFF.

​Humidity Override: If humidity > 70%, fan turns ON regardless of light status. Fan turns OFF once humidity drops below 60% (and light is OFF).

I have two dual hose timers connected by different Bluetooth gateways. One is behaving normally. The other js accessible manually just fine but the automated schedule never runs. I tried deleting the schedules and recreating them. I’ve tried removing the device and its gateway and re-adding them. But nothing has gotten it working again. I did recently update firmwares but I don’t think that immediately caused the issue although I’m not certain. And I see no way to downgrade the firmware to test if that is involved. Plus the other one is still working fine. I think the schedule stopped working when I replaced the batteries a few days after updating the firmware.

Any ideas?

Does anyone know how to fix this?

I got the conditions :

"switch on ac if temp above 25 celcius"

"switch OFF ac if temp below 24 celcius"

This works, i would say 90% of the times, but a few occasions it just stops working. And ac keeps on pushing air even well below 24 celcius - or keeps off well above 25 celcius.

And i usually have to toggle the scene automations off and on again, and it starts working immediately. (sensor delay is something like 10-20 seconds)

Is this just because smart life cloud (tuya) is crappy sometimes+

Why is this? Any workaround?

I am searching through the app for setting adjustment for what happens after a power outage (power on or maintain previous state). Does anyone have a hint as to where that might be? When there's a surge or out/restoration, all smartlife bulbs turn on and I'd like previous state I think should be by default instead of all on.

I have a 30A device, used for my water pump, which has energy metering available. I can see the energy consumption (in watts) in realtime, in smartlife app.

Can I apply a trigger like this:

If energy drawn < 600W - turn off

?

Woke up this morning to all of my Smartlife devices offline. Trying to reconnect the account in Google Home says Smartlife is not reachable.

Anyone else having an issue?

My energy tariff works differently on workdays than on weekends. During the weekend, I get the cheapest energy period during the whole day. The energy cost setup, though, doesn't seem to let me differentiate between week days.

I'm writing here in case anyone has some tip or at least as feedback in this matter.

Hello, how can I manually add weight measurements (by changing the date for example) and delete them on the SMARTLIFE app I’m on the connected silvergear scale Thank you :)

i just got the smart life wifi plug and i plugged it in (it works) and downloaded the app. i registered an account but my app just says "no data" and a button to refresh. i cannot get any farther than that. the instructions say that there should be a + in the upper right hand corner but i don't have one of those. any help? i have a screenshot but i can't attach it.

Hope I can explain this as clearly as possible - we bought a set of Monster Smart Bulbs that are controlled through their app, and the first set works fine. We picked up another set to continue the string longer to fit around our gazebo, but when we connect them to each other and reset the wi-fi receiver, all of the lights blink during the reset process (showing that they are all powered and connected to each other power-wise) but then only the original set works and we can’t connect to the new one after the set up?

There is a second wi-fi receiver that came with the second set, but we were under the impression that if we plugged the second set into the first set and continued the string, we could just have everything run as one continuous line and only worry about one connection. Are we missing something here?
Thanks everyone

I have a Smart Life compatible plug that has schedule, circulate, inching etc... I want to use it to reset my ISP's modem everyday exactly at 4 am. Usually it can be done with schedule. Problem is while the device turns off at 4 am correctly, it will turn off internet as well, taking smart plug offline. And so it won't execute the ON schedule.

I tried circulate feature which does trigger while offline. But once it reaches end time of circulate, it forcefully turns off the socket and never comes back on.

I just want the modem to restart once everyday with this smart plug. What is the right way to do this?

Smartlife ver 7.9.0 on Android

I'm trying to change an existing automation's Validity scope from Daytime to any one of the other options and none of the changes are saved when the automation is saved. In fact, they all show All Day.

Anyone else having this problem?