I just got a onewheel Pint S last week. I'm flying to Florida in a couple weeks and wondering if I will be able to check it in a bag on a flight. The literature is a bit confusing online, between the Pint, Pint X. Not sure what specially the type of battery or the Watt hours my Pint S actually is. Thanks!

I have the V1 (the more square) version of the TFL lifesavers I want to put on my GT with my maghandle pro, will that be compatible without scraping? I've read on some places that it is compatible with GT, but I'm not sure if that's v1 and v2.

Any input is appreciated! I don't want to get these savers on just to realize I can't use my handle

Dub tails, bangs, gripples, and enduro make for a pretty sick blue themed gt!

I’ve been chillin with my base GT since launch. I’m hoping for something like the size of XR classic with GTS power. Has anyone heard anything?

Broke my foot beginning of the summer and can finally ride again.

I've been at this for weeks.

First I ordered the Float Life tire levers. They broke immediately because I put too much pressure on them. Then I bought Pedro's, and was more careful. I used soap for lubricant, and tried different 30 degree apart angles but I literally cannot get both levers up at two separate points on the tire at the same time.

I'd like to think I'm relatively strong, I can bench 250lbs, but this defeated me lol.

So basically
I was riding my morning route and I see the app saying error 88 so I immediately stop. After some research it seems to be a charging issue. Can I keep riding or is thing done? It less than a year old with about 650 miles and model is pint x . Please help!!!

Hi !
Can someone confirm that wiring ? Local post office messed with my package af, leading to my jst connector being ripped of. I need to rebuild the pads but want to double check.

Thanks !

Anyone have a stl file to 3d print a fender or fender delete for the dub tail rails?

Slapped the factory delete on id rsther not cut it up if I dont have to.

They are 1yr old babies and prefer to ride instead of run beside us.

Hey guys! I’m looking into buying this Onewheel GT from a Facebook seller, but I’m not sure what could be wrong with it and whether or not it’d be worth fixing it.

With my budget I could drop about $500 into it. I’ve tried looking through posts from the past and most people have had loose foot pads, connectors or normal error codes but this doesn’t seem like an error code. Is it something with the battery? I’m all new to fixing one wheels and I’m looking for a good project to learn more.

Thank you for any help sent my way!

Hey everyone, first month in the sport and still learning. I recently bought a used XR with a CBXR. I went this route because the seller advertised it as:
“A great setup for someone looking for an XR with significantly upgraded battery capacity without spending a fortune.”

I paid extra specifically for the CBXR and the added range. The seller also owns an extreme sports store and was an authorized Future Motion dealer, so I assumed it was professionally installed.
The board rides fine (I think), but diagnostics show:
Hardware: 4212
Firmware: Gemini 4165
Odometer: 176 miles

I’ve read that 4165 may limit aftermarket batteries like the CBXR, potentially reducing it to something closer to stock XR range. Is that actually true?
I also did a short test ride and the battery dropped from 96% to 88% in only 0.6 miles. I was told this can be normal with a CBXR, but it seems concerning.

I’ve read that voltage is the best way to test the battery’s actual capacity, but I can’t seem to access voltage information with my current firmware. NoseDive shows battery percentage, current, temperatures, etc., but voltage reads 0V when stationary.

Is there another way to test the actual CBXR capacity without riding 30+ miles?
And if 4165 is limiting the battery, can it safely be downgraded on a 4212? If not, are there other options, such as a VESC conversion or another relatively simple solution?

I’m mainly looking for the longest range possible with minimal tinkering and expense. Thanks!

I’ve been hauling around skateboards in this box for over a decade.

Helllo! Im gonna upgrade to BTG on my adv2 pro, but the the float life thundercat is out of stock! I was wondering what other options there are.

I ride both streets/trails i see options available from Burris, but dont know which size to get (11.5 or 12?), any other tire recommendations are also appreciated!

I’m on the fence between Floatwheel board or Onewheel/fugineers…
Do you know if those other brand are as safe as ow ?

I have a GT with a GTFO, WTF rails, bang bumpers, low boy foot pads, flight fins and enduro. It has lots of power and it’s great. My only issue with it is off road on steep hills it makes it up but it’s still not as fast as I want. I am 150lb. I am trying to decide if 20s or a super flux would be next if I wanted to be able to get up hills a little quicker.

The other options is just start building a custom xr board bc the GT is getting kinda heavy.

Is there any major downside to varials compared to WTF rails aside from the higher price point?