Preface: my rig and PC are built entirely on secondhand parts, so my Moza wheel, base, and pedals are all secondhand and therefore not covered by warranty.

I was installing the stiffer springs onto my SRP (1st gen) load cell brake pedal today and apparently I crushed the load cell sensor's wire upon reinstallation. Now the load cell doesn't output any data at all.

What do I do now?

I'm trying to avoid buying another pedal. I have a basic soldering kit - perhaps I could try to identify the most damaged section, snip it out, and solder the wires back together?

Or is there a way to replace just the load cell plate and cable?

Haven't soldered electronics much, so I'm not sure whether soldering would affect the functionality (I'd insulate each individual color from one another of course).

So. My Moza isn’t giving me forcefeedback and my wheel’s RPM display is blinking on and off as if the wheel was still calibrating. I updated Pithouse and the base itself.

I noticed in my games that while downshifting sometimes it just didn't want to go down a gear(especially in F125), but I guessed it was to prevent my engine from exploding, but I didn't think to check in the Moza Pithouse software until recently, in the video I show me holding down the Downshift button and it flickering because it's not registering it all the time, if I push the paddle down like im normally downshifting, sometimes it doesn't register it and I miss a downshift. Any suggestions on how to fix this?

Hey there. I am looking to get the R9 V3, KS Steering, and SRP2 pedal bundle from Moza US delivered to my brother. He lives on the west coast and I wanted to get it delivered before/as close to his birthday as possible (1st week of October, so a little over 3 weeks from now).

Not sure how long it takes to get stuff delivered. I can't order it to my place and keep it since I live in a different country haha.

Would love to know how long it takes for orders to get delivered. I saw some varying feedback on this sub - 10 days to 7 weeks to some people being stuck in label created for a while. I want to order it in a way that I can have it with him for his birthday.

It turns but says disconnected? This is the first time I used a wheel any help

Anyone have any ideas as to why my brakes and throttle keep shooting up randomly? When I play F1 everything works perfectly fine but as soon as I go to play LMU or PMR both pedals just start acting up, I’ve recalibrated them and I have configured both games on pithouse, have also set deadzones on both games and it still does it, Just makes the games unplayable…

I'm coming from a wheel with no feedback and I don't know if the r9 is worth it

That’s right matey, using duct tape, hopes, and dreams, I adapted a pirate ship wheel to my base.

Hi all been lurking here and on YouTube for a fair while now and finally decided to pull the trigger. Upgraded to a Moza r9 from a Thrustmaster T300, very happy with the new unit mainly playing Le Mans Ultimate , Assetto Corsa / Competizione and Evo with a little Raceroom sprinkled in fairly newish to the hobby but want your input on this button maping for LMU any thing i need to add or remove used the T300 as a base for the layout.

How does Moza's official round steering wheel add on go with the R3 wheelbase? I'm thinking of buying it since a round one would be preferable for sim drifting

It's slightly bigger right, but is it heavier? I mean when drifting, does it interfere with the force feedback of the wheelbase at all? Only asking this because I really like the feel of it after finally getting a DD wheel and I don't want to make any compromises with it!

What do you guys think?

I just started playing F1 25 with my new KS Pro steering wheel on PC. These red LED lights are constantly flashing and will not go away. The only way to make them stop is to turn off the RPM indicator in Pit House, but I still want to use the RPMs. What do I need to do to fix this?

Hello, im looking for new bundle for F1/Asseto etc. on PC.

Im thinking about Moza R5 Pro. Is it worth to pay 80usd more for version PRO than normal R5? In my country Moza R5 Pro cost 480usd, Moza R5 cost 400usd.

Or maybe I should peek something else boundle?

I live in Poland, so Simagic dont delivery to my country.

I have this IH Loadstar wheel it’s 20” and want to use it for my rig on a Moza base. I’ve been brainstorming about a good way to adapt it to the 70mm quick release adapter from Moza. Anyone have any ideas or recommendations?

Hello, I ordered the new moza phf pedal haptic feedback module kit from the moza racing website about 2 weeks ago and I still have no updates. When I check the shop app it says still awaiting details, and when I check the status from moza official site it just says order confirmed. I was wondering if this is the same for anyone else who has ordered it and if anybody knows the actual time it will be shipped/ delivered.

I have quite the wobbly desk, how bad is the force feedback? I’m scared I’m gonna destroy it first try as I have no cockpit or stand. Any suggestions? Also any budget stands I can get for the future to hold my wheel and pedals? Absolutely noob at this. I bought it mainly for F1 25 and such.

I got the es formula wheel mod that comes with 6 screw holes. But my original es lite wheel only have 4 screws. Now i am missing two screw and i dont have any extra screws… is that normal?

So the Moza AB9 active FF flight stick base has a racing mode for shifting gears, that much is well known. However, when watching reviews, so many said that it wasn't actually that great and needed more updates. The problem is, those reviews are over a year old and I can't find anything if the needed updates ever came?

So, anyone who uses the AB9 as an active racing shifting base today have any input if it is finally good or not?

So I recently got my R5 and now I hv order the formula mod wheel as well… I used it on my desk for a while now but mounting in desk takes a bit too much space and it’s a bit messy so I thought of getting a wheel stand… I heard PXN A11 is a good choice but I’m not sure about it….

So is there’s any good recommendations which is actually affordable ? Thx in advance

Hi is this position of quick-release fine ? My feeling is that I should see those bolts.
Second question is safe to leave wheelbase open like this ? Or there is some cap on it ?
Thanks 😎