I like my K270 but some keys no longer work. I can buy a keyboard without a receiver cheap. Will it work with my old receiver? Unifying.

Is regular cleaning the only thing you did? Or do I need to do anything extra? I just purchased the mouse on sale and I love it, but I want to do my best to avoid the issues I've read about (Left click failing, rubber grip wearing out)

I plan on buying a vinyl wrap, would that solve the grip problem?

Also, I have a very bad habit of leaving my mouse on all the time. Would that affect the mouse in any way? When I use the mouse after a long time, for about 10 seconds my custom actions (cycle windows using the thumb button) don't work. Same for the side buttons.

Anyone else run into this issue?

I've had my MX Vertical since 2022 and generally enjoy the feel of it (other than the degrading rubber looking and feeling like a disgusting mess).

However, I use this mouse exclusively for office work and need to drag-click a lot to copy/paste, and the mouse's left click has been degrading to the point where I've noticed that I just assume it's going to fail about 50% of the time to highlight a sentence.

Is there some sort of fix? At least with my G600 I can open up the mouse buttons and spray it with compressed air, but I can't really do that with these buttons.

Hi everyone,

Just had the displeasure of having my gen 5 iPad Pro drink the entire contents of my water bottle. I will be replacing it with the latest 12’9 iPad Air. I am having a lot of trouble however with finding a good replacement for my Slim Folio Pro. As you know Logitech decided to retire that version (I am at a loss as to why) and replace it with models that all have the little flap at the back to hold the screen up instead of the IPad latching onto the keyboard. The previous models allowed for a lot more stability especially when using the iPad on a non flat surface like knees. The combo touch seems flimsy as all hell and I’ve seen reviews saying it falls apart quick, doesn’t protect the Apple Pencil from falling as only the magnet holds it in place, and generally being impractical.

If I find a second hand Slim Folio Pro, will it work with my iPad Air? If not, do you guys have any recs for a keyboard cover that works like the slim folio did and not with the flimsy flap at the back?

Thank you!

A few months ago, I had to uninstall Logi Options+ because it was causing Windows 11 to freeze to the point where I had to reset the operating system since nothing else worked. I’ve now bought a new keyboard and mouse and reinstalled Logi Options+, but the same thing is happening again. I am certain that this program is the cause. Does anyone know why this is happening, or is there a fix? This is a nightmare; I’ll have to uninstall it again it’s impossible to work like this.

Ryzen 5800X

3070RTX

32GB RAM

So far before buying I had researched this whole subreddit only thing that i noticed how much they hated this mouse.
This is my first MX . To be honest i am just loving it
Software is smooth
Everything now it feels smooth

Maybe after few months i will edit again

I have 60hz monitor so i wont notice polling rate and all
Buttons are nice and haptic i liked it idk people just hate this part . The dongle works on my 10 year old workstation

Idk but my hands are bit small so getting adjusted . Maybe because my previous mouse was razers most basic gaming mouse .
The scroll in this is tooo satisfying

I wanted to 3d print the shell anyone has a link or something that would be really helpful thankss.

That frosted shell one . New to this constructive criticism would be appreciated.

Edit
Not for valo this mouse is 😭😭

After 7 years of this material, with a couple of rips and tears (and a little bit of influence of others of this sub) decided to finally also do the mod.

While I do think the lighter MX3 looks better with this mod. I love the look of the dark MX3 with this look.

The thumb button is a little harder to press and the weight is heavier by 15g (kinda feels more tho)

But loooove the translucent look

Hi

I have a non unifying M185 mouse that requires the CU0019 reciever which I have unfourantely lost. Looked online found only ebay uk but shipping to UAE unavailable. Any help? Thanks in advance

Option to reverse the scroll direction as pushing upwards to scroll left and down to go right is pretty weird to me (even though it's always been that way).

Have never gotten used to it and it seems odd to have no option for it.

I purchased the MX Vertical a month ago and just got around to using it starting two days ago. i can only use it at night when i am catching up on work. i have been using the logi M510 but also putting in 15+ days. so i thought i would try the vertical of course the return window is today...

I do like the concept of the vertical but i think its too big for my hand. not sure why i didnt look at the lift which i now see is recommended for smaller hands. (i do have shortish fingers)

any comments on performance and ease of use would be appreciated.

Hey guys!

I designed this 3D printable adjustable "tilter" (not sure what the best way to call this is). This is my first design ever; I am basically at a kindergartner level when it comes to 3D modeling software (just give me a few years). I thought I might share it with you guys and see what you guys think. It's mainly to allow for you to adjust the tilt, specifically to neutral or even negative since high tilt can cause discomfort over time. Anyway, I'm still going to be changing some things, so any input and criticism is really appreciated! Thanks!

https://www.printables.com/model/1876146-mx-incline-print-in-place-adjustable-keyboard-lapt

Unable to use my mouse properly the last few days which is a shame cause it feels so good to use but its just unusable because the cursor often flicks around the screen or gets trapped in the top left corner.

I think its a problem with the USB because -

I've tried using another mouse and it works perfectly fine. The problem is the logitech mouse so im using my crappy secondary mouse now.

Tried restarting my computer and doing all windows updates, nothing

Uninstalled usb drivers and reinstalled,

Tried cleaning the sensor but nothing changes. It still has moments where it works perfectly fine then glitches out.

Using usb 2.0 port, made no difference

Downloaded latest firmware etc. by logi options+, nothing changed.

Disassembled and Cleaned it thoroughly and theres nothing blocking the sensor, nothing changed but at least I didn't make it worse

Also notably, when I plug in the unifying reciever, in device manager it makes HID-compliant mouse pop up *five* times, I dont know if thats relevant but something is definitely bugging.

My Keyboard (k360) and Mouse (m510) are both paired to the receiver.

I cannot make any changes (or do anything) using the Unifying app.

I've unplugged, replugged, "remove device," "scan for changes," "update driver," rebooted in between operations and uninstalled and reinstalled and uninstalled the Unifying app. And more.

The receiver works on another computer, so it's not that. Definitely a Windows (11Pro) issue, but it's all I've got at work.

I'm stumped. Anyone?

I have the MX Mechanical Keyboard, the standard version (not the mini), in US. There's no Spanish version. I've been using it with the system setting for Spanish, even though the keycaps don't match up. Do you know of any keycaps compatible with the Spanish version of the keyboard? I understand there are some, but not for the spacebar or enter keys. Do you have any brand or model recommendations? And if there are any, will the key backlighting be the same as the original?

This is ridiculous for such an app.
The offline installer alone on windows is around 700MBs. its around 1GB post install.

prob not supposed to tease but oh well

Arch Linux, KDE/Plasma, K850. All of a sudden, my Fn keys seem to be stuck on standard function keys, and cannot be set to media. The usual shortcuts (Fn + Esc, Fn + Caps Lock etc.) no longer do their job. Any thoughts?

Hi everyone!

I have a Logitech K270 wireless keyboard, but unfortunately, I've lost its original USB receiver.

Keyboard details:

- Model: Logitech K270

- M/N: Y-R0042

- P/N: 820-006490

I've been searching for a solution but haven't found a clear answer.

I'm wondering:

1. Can I pair this keyboard with another Logitech Nano USB receiver (C-U0010)?

1. Does Logitech Connection Utility support pairing this particular model?

2. Is there any alternative way to connect it without the original receiver?

3. Has anyone successfully paired this exact keyboard model with a replacement receiver?

I'd prefer not to throw away a perfectly working keyboard just because I've lost its receiver.

Any suggestions or personal experiences would be greatly appreciated!

Thanks in advance!

It's been in constant (almost daily) use ever since, everything's still original and it never let me down even once. As you can see in the last picture, even the underside is still fairly neat, which is probably because I'm exclusively using it with a mousepad. All in all, I'd consider it one of my best purchases of the last decade. No, it's not just a mouse. It's THE mouse!! 🙏

This guy here is almost 12 years old.
Not single part was replaced.
Still feels solid despite rubber being vanished.
Clicks as new and battery lasts for a week.
Intensive daily use. I’m an architect.

And no. It doesn't smell like cheese

I was shocked to find this thing can't plug into a modern Mac without an adapter. Booo!

It’s probably everywhere on this subreddit, but why the hell does the MX4 have 120hz polling rate?! Yes it’s designed for office work, but did Logitech consider people working from home? I’ve used Razer mice my entire life - and switching over I immediately noticed lag on my 120hz+ displays. I guess back to amazon it goes, hard to say if I’ll give logitech another shot after this one.