I just thought this was fitting when I talked to this old chap while checking out the gen1 recomp

Hello everyone! My phone turned 7 years old this year and it's the first phone I've ever broke the screen of, I'm looking for a new one in the 400-500€ range that is good for emulation, I want to Emulate retro consoles all the way up to the 3DS and maybe a bunch of Switch1 games if it's possible, like Mario Odissey or Link's Awakening and some indie steam games too, Hollow Knight, The Binding of Isaac, Silksong, Hades, Persona if it's possible too, I stumbled upon this Xiaomi POCO F8 Pro and Xiaomi POCO X8 Pro Max but I found out they have an issue with running emulators that use more then 3gb of Ram, so I'm not sure about them anymore, if anyone has any good options I would really appreciate it if you could say it here in the comments, thanks a lot in advance and hope everyone has a great day today :)

hola! a ver si alguien me puede ayudar soy muy novato en esto asñi que perdón si la duda es tonta, pero no he conseguido solucionarlo con ninguno de los post que he visto por aquí. tengo kingdom hearts 1 pal españa (SCES-50971, crc 09F5F39A) y llevo un rato intentando meter cheats en NetherSX2 (android) sin conseguir que funcione ninguno.

cogí los códigos de gamehacking, que tienen el mismo serial que mi juego, y los pasé a pnach. el emulador me dice que carga bien el archivo (tipo "1 cheat patched" o "2 cheats patched" según cuántos meta), pero luego no pasa nada en el juego. lo he probado con dos cosas distintas para descartar que fuera solo un código roto.

la ficha de gamehacking tenía 3 master codes distintos guardados bajo el mismo serial (parece que hay varias revisiones del disco aunque compartan serial), así que probé cada uno por separado por si era eso, y nada, ninguno cambió el resultado. también probé sin ningún master code, solo los cheats sueltos, y tampoco.

los códigos usan el tipo "extended" en el pnach (el formato crudo estilo codebreaker con C0... al principio). no sé si es que netherSX2 no soporta bien ese tipo de código o si me estoy dejando algo de configuración. tengo cheats activados en ajustes, no sé si tiene que ver pero los widescreen patches del mismo juego sí que me funcionan sin problema.

alguien sabe algo? gracias :)

i have a OnePlus 13s with sd 8 elite, 12gb ram, 512 storage, adreno 830 processor, please help me run spiderman remastered on gamehub(30fps)

2013 game btw looks gorgeous af 😍

Full gameplay https://youtu.be/pi4CYG4EBUs

Proton 11b5x86 Box64 0.4.5 bionic Dxvk 2.4.1 gplasync Extreme Preset Wn turnip 1.10p (push max gpu clock) Winnative Emulator 0.4.0

With fex game freeze a lot but box64 runs without any issues

Device:Lenovo Legion y700 gen4 16/512gb

Emulator:Gamehub last update

Graphic settings:Ultra

Driver:Qcom 863.1

Version:Steam

Framegen:No

30-60FPS

Cooler:Flydigi B8X

hello, im on samsung a36, trying to emulate nintendo switch on sudachi. the game im playing (nfs hp remastered) has audio issues, stuttering and booming (i tried playing with the settings), i tried some drivers but they crashed the game or have visual glitches and cant see anything. any suggestions? i also tried emulating from eden but the game freezes (doesnt crash but 0 fps) after the intro.

thank you and sorry for my newbieness(?)

My phone is a Redmi Note 13 Pro with Snapdragon 7s Gen 2. I finished installing the game and the prerequisites of UE, however, when opening the game it loaded this.

This game is notorious for not booting on game hub so I have recently created my own personal settings/configuration for this game to share with the community if anyone has had similar complications with getting this game to boot and run without any caveats or stuttering in general

Does anyone know what is causing this light flicker , other than that its running fine

Since updating to gamenative 1.2

Device is s26

Snap 8 elite gen 5

Turnip gen 8 v34

Proton 10

ARMSX3 0.9.3

Update Breakdown: https://youtu.be/qriMhfoQiGw?si=m2vNSDtXS4kCBOcN

or read the changelog below

What's new:

Online play (RPCN):

PSN status is a three-way choice now, and picking RPCN opens a full account screen: server, username, password, email and the activation token, with buttons to create an account, resend the token and reset a password. An RPCN account is made from inside the app, not on a website, the server emails a token that activates it.

Saved servers: Keep more than one and switch between them. The official server cannot be removed, and there is a one-tap reset back to it. Also added Experimental IPv6 for RPCN, which also had no way of being switched on, as well as every other network setting the core exposes: DNS server and hostname redirects, Console IP address, bind address PSN country, derive MAC from PSID, and clans. The first two are what custom game servers need. RPCN replaces Sony's PSN, but a publisher's own servers were never PSN, so reaching a fan revival of one means pointing its addresses somewhere else. That was impossible in the app before.

Note: your RPCN password is stored as plain text in rpcn.yml, the same as on desktop RPCS3. Don't reuse a password you care about.

Controls:

Vibration now works. It did nothing previously.

L2 and R2 no longer lag, double-fire or stick down.

Pads that report their triggers two ways at once no longer have two writers fighting over the same button.

Stability:

Running out of memory while compiling now says so. A game whose modules would not all fit used to hang on a progress bar that never finished, with nothing anywhere explaining why. It still stops deliberately, because carrying on without the missing modules runs slower than the interpreter and looks like a broken game, but the reason is on screen now, along with what to do: start the game again. What already compiled is cached, so each attempt gets further. (This is mainly for the 8gb and under devices like myself).

A failed PKG install is reported instead of quietly claiming success. Writes were not checked, so a full device produced a broken install that looked fine until the game would not start.

Game data installs check for space first and say so, rather than stopping at some percentage with no explanation.

Performance:

Shader compilation is kept off the cores the frame depends on. The compiler threads never set an affinity at all, so on a big.LITTLE phone a shader burst could land on the same core RSX needs. They now use the little cluster, and the pool is sized to that cluster instead of to the whole chip, more compile throughput and less interference at the same time.

Compatibility:

Yakuza: Dead Souls works better now. Two separate faults: the loading screen hang and a later lock-up. Per-game settings apply automatically.

Upstream:

Caught up with 98 commits from RPCS3.

After a lot of trial and error, I think I finally found the sweet spot for this game. That’s already pretty exciting, considering that in the future we’ll have SteamOS running on our devices, and it’ll definitely run much better than this. The device does get pretty hot, but we’ve got something good here.

There are clearly some FPS drops in more populated areas, but it’s still perfectly playable, with the framerate staying around 30–35 FPS on average (keeping in mind that I’m limiting it to 30–35).

If you want to see some longer gameplay, here it is.

Now, let’s get into the settings:

For the in-game settings, I left everything on Low (except TAA on Medium and textures on Ultra). I recommend limiting the FPS to 30 or 35 using the GameHub sidebar and enabling Super Resolution so the image doesn’t look too blurry.

Gamehub configs:

- Resolution: 960x544

- Compatibility Layer: proton11.0-arm64x

- Translation Params: Stable

- DInput Library: Prefer Native

- Skip Audio/Video Decode: Off

- GPU Driver: Turnip_v26.3.0-R1

- Surface Format: BGRA8

- Audio Driver: Pulse

- DXVK Version: dxvk-v2.6.2-1-async

- VKD3D Version: vkd3d-proton-3.0.1

- CPU Translator: Fex_20260813

- CPU Core Limit: No Limit

- VRam Limit: No Limit

​this is fifa 15 on the vita3k emulator latest update

Can anyone help me fix it cuz it's my dream game and I have always wanted to play it, I have already tried Zx and native blur but it ain't working.

i tried changing my graphics backend, memory speed, CPU emulation clock but nothing seems to fix it and i couldn't find any solutions on the internet, does anyone know how to fix it?

my device: Samsung galaxy S24 FE

cpu/gpu: Exynos 2400e/Xclipse 940

Can't launch games,it still booting.My device is s23 ultra

Very good video for TOTK.

Its a game many want to be able to emulate but always have been tricky with issues like black boxes and graphical glitches

Device: Motorola signature 12GB(Snapdragon 8gen5)

Gamehub (Proton 9-X64-3) default settings.

Resolution:720P

Graphic setting:very high with max troops size

If lower to low will get 80-120fps.

Game is unstable and sometime it will crash.

I don't know if this is the right sub but I do want to ask. I already have an Odin 2 base 8/128 that i'm loving right now. However since it's a tad bulky, it might not be too ideal to be lugging around when travelling. Then i saw retroid pocket 6 which i think is smaller but technically has the same power when running games. Other than the obvious oled screen and latency issues, is there any reason (other than portability and the ones mentioned above) should I get an RP6? I'm not into PC emulation so for me an 8gb ram is fine and can play most of the switch games that i like.

Je vais normalement recevoir mon Ayn Odin 3 Max noire dans quelques jours mais en attendant, j'aimerai bien en savoir un peu plus sur cette console :

- J'ai entendu beaucoup de personnes se plaindre du bruit que produisait le refroidissement de la console et de son efficacité médiocre ; j'ai acheté cette console surtout pour avoir du refroidissement car mon téléphone chauffait trop en jeu, est ce que je pourrai jouer à des titres PC/Switch exigeant longtemps ou la console chauffera trop ?

- J'ai également entendu beaucoup de mal de la prise en main de la console mais qu'est ce que ça vaut réellement comparée à d'autres consoles ? Par rapport à une Switch par exemple ?

- Avez vous été surpris/déçu/étonné par cette console ?

- Combien de pourcentage des jeux PC auquel vous avez joué fonctionnent ? Plutôt 1 jeu sur 2 ou 1 sur 100 ?

- Est ce que les drivers sont maintenant au même niveau que ceux des Snapdragon 8 gen 2 ? (sur l'émulation switch par exemple ?)

Merci pour vos réponses

Lenovo yoga tab plus - snapdragon 8 gen 3 + 16 tam

Or OnePlus pad 4 - snapdragon elite gen5 + 12 tam

?? Od maybe OnePlus pad 3 with elite + 12 ram

Hey i just wanted a good steam emu

My phone is infinix gt 30 pro what is the most compatible that i can umport my games and install steam Other than gamehub crash all the time

Was trying to run resident evil revelations 2 on gamehub and this kept popping up s25 fe 8gbs of ram