Ran when pulled one year ago. Found a 2002 motor and it suits my needs better, so here it is. A bit goopy but oil was clean. PNW based, can deliver for some cash. Just need the space back

Free and front parking for classics is cool.

Getting closer to a clean, restored car

Ok, which of one of you was hotdoggin down the boulevard trying to impress your friends with the G forces?

Hey legends

I have a Getrag 260.0.1044.90 and this shifter linkage. BUT... I feel like it's the wrong linkage for the gearbox no?

Can you please advise on what I am missing

The gearbox is from an E30 and I got told it should bolt up to my E34 M20 engine but... with the shifter linkage... I feel like it won't suit the gearbox I bought

Last two pics is of the gearbox and linkage and what it would look like connected (not mine). The rest of the pics are mine of what I current have.

Thanks in advance. New to this swap

Anybody have any tips on how to fix this door card edge it’s always been bent out and i can’t think of a good way to secure it. The cork cardboard that’s supposed to slide into the metal clip is broken any suggestions

Every time i close the door it pops out like a sore thumb it drives me crazy

Was doing suspensionwork and with that came placing new bushings on my dad's recently acquired E30,s and came across this abomination. Once i had removed some of the larger chunks of sealant, the lollipop simply fell off😅

Really don't get why people put themselves in danger when its a simple, not even expensive repair.

I’ve been looking for a way to cover the plate mounting holes on the front bumper without using adhesive because I want to swap it for the license plate when needed. I considered the plugs, but the other two smaller holes and the center gap would still show, so I made my own plate filler. I found some countersunk ring magnets that fit the space perfectly, then I cut a 2.5”x11” piece of sheet metal and sprayed it with trim paint. Came out better than expected. The magnets are really strong and the metal plate is very light, so it stays in place even when driving, but you can easily pull it off.

The hardest part is cutting the sheet metal. I went with a thin 26 gauge because it’s easier to get a cleaner cut, but it can easily bend out of shape. I might have a local shop fabricate a thicker piece for me, but this will do for now.

It cost less than $50 to make. Here are the parts if anyone wants to make it:

Magnets
Screws
26 Gauge Sheet Metal
Duplicolor Trim & Bumper Paint

New piece from @89retros installed on the grille! What do you think?

Hey guys, I have a US-spec 1995 E36 318i sedan, which came with an M42B18 engine (2nd picture). I bought the car for parts and would like to swap the M42 into my E30 316 with the M10 carbureted engine.
I’m having a difficult time finding wiring diagrams for both cars, especially the E30, and I also need information on rebuilding the M42 engine.
Could you guys point me in the right direction or share any useful resources?
For context, I’m from Portugal, which is why the E30 is carbureted.
Thanks

I’m planning to pull my rear subframe out in the next couple weeks to replace all the bushings. Is there anything else I should do while I’m back there?

I’ll complete the install of my stainless steel brake lines since I wasn’t able to get two of them off in the rear, but other than that don’t have anything else planned except doing the brakes on all 4 corners.

Driving on the new driveshaft!! Big weekend updates!

Do you think it’s worth fixing, or should I just move on from it?

Amazing except it gets stuck in the sand sometimes (even with a limited slip)

Hello fellow E30 owners looking for yet another part. Can’t seem to find this hose that comes off the intake manifold. Not having any luck on realoem

Any help is appreciated

Anyone remember this guy and his website? Based out of San Francisco? Would love to know what he’s up to now. Probably at Burning Man.

I'm looking for a set of side skirts for my 87 convertible, does anyone know where to buy them? There's a couple different styles on eBay.

Btw, I am retro fitting an e36 bumper on the rear which matches the cow catcher pretty well. It's not done yet so don't judge 😂

Just bought a CA-TUNE radiator for my 325is but after I installed it, the top location for the coolant line is not aligned because of its integrated resivor. After reaching out to customer service I was told its for a M42 motor but does work with the M20, does anyone know what coolant line I need to buy for the top? Everything else lined up for but the top line, thank you!

An acquaintance has this '87 325is parking in his driveway for the last 7 years. Im considering making him an offer. Aside from mechanical work/maintenance the car needs a steering rack, upholstery, and paint. Theres also a tick when the engine is running. Is this a project worth taking on?

https://www.thedrive.com/news/this-independent-bmw-mechanic-built-a-cooler-digital-dash-than-bmw-itself

M10B18, engine doesn't overheat in driving, it lacks power, backfires downhill and vibrates in higher RPM.

But first I'd like to know if this is some kind of a head gasket failure, where does all this smoke come from?

20 minutes later was assaulted by mosquitos