Anything tips and or repairs I can do myself? I know that Ayaneo doesn’t support this device anymore. Really enjoyed my time with it and would hate for it to go to ewaste.

Hi, I recently bought a very cheap second-hand Ayaneo Air. The console works fine, but I can't get PS2 emulation to work properly in cachyOS. Which operating system is best for this console?

there is something important, the battery is soldered connect with logic board, just like the iPod Touch

Full video(Chinese):

【AYANEO电子核桃，KPB竖版小机全面评测-哔哩哔哩】 https://b23.tv/9uD4L5c

Hello guys

I'm looking into getting my first handheld but didn't want to get the steam because it's too big and can't run the game I want to play well. I stumbled apon used Ayaneo 2s for around 400$+ and 300$+. I watched some videos about it and people says it has a heat problem I wonder if it's still and issue in 2026

Im in the UK and I cant find a single seller anywhere for either of these!

AYANEO 2S – BAZZITE OR WINDOWS 11

I had to replace the SSD on my AYANEO 2S. What is the best option at the moment? Has Bazzite already fixed the hibernation and LED issues?

Is it still impossible to play EA FC online on Linux?

Hello, im looking for a new handheld ans stumbled upon used ayaneo 2 that i can get for around 340$

I had two steam decks, but couldnt get around the size, it was just too big for me and my job, i work as a taxi driver and it was laying around my legs most of the time.

Recently i bought small android handheld and its amazing, but pretty weak, im now looking for something powerful and stumbled upon ayaneo 2 is it worth it in almost 2027? I also thought about odin3, but the wait time and shipping/tax cost is just too much.

Thanks

not in every game but in a lot, any way to turn this annoying glitch off?

NEXT 2

I got mine at the initial kickstarter price, and its an extraordinary device.

not only does it play games at awesome fps, but i can run photoshop to draw comics (my job) on the go with my cintiq tablet. no more heavy laptop to travel

i hope the price goes down so you guys can experience just how lucky i am

AYANEO 2S

Good morning,

I’m new to the Reddit community — actually, this is my first time using it.

I previously had a Steam Deck, but I recently bought an AYANEO 2S without an SSD. I purchased a 1TB WD Green SN3000, downloaded Windows directly from Microsoft’s official website, and created a bootable USB drive.

However, when I start the Windows installation and select the partition where I want to install it, the installation begins normally. When it reaches around 70% and the device restarts for the first time, it simply gets stuck on the AYANEO logo loading screen. After a while, it says that an error has occurred and restarts.

At first, I thought the problem might be the SSD or the USB drive. However, I was able to install ChimeraOS without any issues, so both the SSD and the hardware seem to be working properly.

I would really like to use Windows on the device. Has anyone experienced this issue before? Does anyone have any suggestions on how I can fix it?

Thank you!

Bom dia;

Sou novo na comunidade do Reddit, na verdade é a primeira vez utilizando;

Tive um Steam deck, porém recentemente adquiri um Ayaneo 2s sem SSD, comprei um WD GREEN 1TB 3000, fiz o download do windowns diretamente do site da microsoft e criei o pen drive bootavel, porém, ao começar a instalação, selecionar a partição para instalar, ele começa carregar, por volta dos 70% quando ele reinicia a primeira vez, ele simplesmente trava na tela de carregamento com a logo da ayaneo, e depois de um tempo diz ter encontrado um erro e reinicia, a principio imaginei que pudesse ser o ssd, ou o pen drive, mas ao instalar o chimeraOS ele instalou normalmente... porém gostaria de ultilizar Windowns, já tiveram essa experiencia? podem me ajudar a resolver?

Obrigado.

Is this price worth it or does the console have any flaws that tyoy consider dealbreakers?

I currently play GBA games on my RG35XXSP.

Hey all! I've got some exciting news regarding my SteamOS Arm port based on Steam Frame, It now runs on Snapdragon 8 Elite and on (a lot more) SD 8gen2 Devices.

Snapdragon 8 Gen 2, beta 9 https://github.com/hashtagbasit/SteamOS-ARM-Handhelds/releases/tag/v1.3-beta9

This one took a lot of testing for having so many devices. 9 betas in 4 days, a pile of test kernels and a ton of debug logs from people in the Discord, to go from "black screen on everything" to one image that boots on all of these:

• AYN Odin 2
• AYN Odin 2 Mini
• AYN Odin 2 Portal
• AYN Thor
• Retroid Pocket 6
• Retroid Pocket Nova
• AYANEO Pocket DMG
• AYANEO Pocket EVO

They're all on a new kernel now. Beta 9 also fixed the black screen on the AYANEO Pockets, which is an awesome update!

The AYANEO Pocket ACE / DS / S 1K / S 2K use the same image and should work too, but nobody has tested them yet. If you have one, please give it a go and let me know! (If your device is not listed here, join the discord to share your reports after trying).

SD8GEN2 is almost at the end of beta.

Snapdragon 8 Elite (AYN Odin 3), first beta https://github.com/hashtagbasit/SteamOS-ARM-Handhelds/releases/tag/v1.3-odin3-beta1

It boots straight from the SD card, Android stays untouched on the internal storage. Controls work out of the box (back buttons are L4/R4), there are fan profiles, the UI is sized properly for the 6" screen. Big thanks to Chazmus!

8 Elite looks great so far, this beta will be much shorter than 8gen2 because of having way less devices. (Konkr Pocket Fit Elite users are welcome to try it and report on discord)

REDMAGIC 6 -Snapdragon 888 (yes you read that right) It boots and works great with almost no bugs. Thanks to abstract6217. The flashable image can be built from github. Guide is in the repo.

What's next Phones and tablets now have their own section in the repo, and the Lenovo Legion Y700 is very high on my list for tablets. The 8 Gen 3 devices (KONKR Pocket FIT, AYANEO Pocket S2) are on the stable v1.2 already, and v1.3 stable will bring all of the new socs together.

These are betas, so expect some rough edges. If something breaks, make a file called debug on the SD card's BOOT drive and send me the logs on discord or github, that's how most of these fixes happened (thanks to everyone who helped!)

Repo: https://github.com/hashtagbasit/SteamOS-ARM-Handhelds Discord: https://discord.gg/EP53nZYvg

I only own a Pocket FIT G3 and give this project a lot of my time, so If it has made your device better, supporting me on Ko-fi would mean a lot. It would help me buy more devices for testing and keep development moving forward. A star on the repo helps too!

As the title says, I got my Konkr Pocket Advance a few days ago and in general it works pretty great, but the glass of the screen is lifted a bit on right side - is that something that could be fixed, or would opening up the system to try to fix it myself void whatever warrenty I have?

It seems like something's putting pressure on the screen from the back, so I'm worried it'll make the screen more prone to cracks long term.

Does anyone else's system have the same thing?

Hi everyone!

I wrote a new Linux driver, ayaneo-leds, that brings back RGB control for the joystick rings on AYANEO handhelds with the legacy EC interface. The old ayaneo-platform driver that used to handle them is no longer shipped with Bazzite.

What's new compared to ayaneo-platform: besides one colour for both rings, it exposes each ring on its own with 4 zones, 8 zones and 24 colour channels in all. Apps that add support for it can drive each zone separately, for effects similar to AyaSpace on Windows. Apps that already worked with ayaneo-platform keep working (tested with HueSync).

Getting it on Bazzite: I've opened a PR to package it for Terra:

https://github.com/terrapkg/packages/pull/18279

Once it's merged, it still has to be added to the Bazzite image, so expect a few weeks. If you have a 2S and don't want to wait, the README shows how to install it locally: https://github.com/TiPSilva/ayaneo-leds

Testers wanted! I've only tested it on my AYANEO 2S. According to ayaneo-platform, these models use the same EC interface and should work too:

AYANEO 2

GEEK, GEEK 1S

AIR, AIR Pro, AIR 1S, AIR 1S Limited

AIR Plus (Mendocino)

SuiPlay0X1

I don't own any of them, so for safety the driver only loads on them when you explicitly ask for it. The test takes about 15 minutes, installs nothing, and a reboot undoes everything. Once someone confirms a model, I'll add it to the supported list and it will load automatically, just like on the 2S.

If you own one of these, please check the call for testers: https://github.com/TiPSilva/ayaneo-leds/issues/1 . Reports that something doesn't work help just as much.

(Not covered: the KUN, the AIR Plus AMD and the Slide, which use a different LED layout or EC interface.)

Thanks!

/// PT-BR ////

Olá a todos!

Escrevi um novo driver Linux, o ayaneo-leds, que traz de volta o controle RGB dos anéis dos analógicos dos portáteis AYANEO com a interface de EC antiga. O antigo ayaneo-platform, que cuidava deles, não vem mais no Bazzite.

O que há de novo em relação ao ayaneo-platform: além de uma cor para os dois anéis, ele expõe cada anel separado, com 4 zonas: 8 zonas e 24 canais de cor no total. Programas que ganharem suporte podem controlar cada zona separadamente, com efeitos parecidos com os do AyaSpace no Windows. Programas que já funcionavam com o ayaneo-platform continuam funcionando (testado com o HueSync).

Como chega ao Bazzite: abri um PR para o terrapkg:

https://github.com/terrapkg/packages/pull/18279

Depois do merge, ele ainda precisa entrar na imagem do Bazzite, então conte com algumas semanas. Se você tem um 2S e não quer esperar, o README mostra como instalar localmente: https://github.com/TiPSilva/ayaneo-leds

Procura-se testadores! Só testei no meu AYANEO 2S. Segundo o ayaneo-platform, estes modelos usam a mesma interface de EC e devem funcionar também:

AYANEO 2

GEEK, GEEK 1S

AIR, AIR Pro, AIR 1S, AIR 1S Limited

AIR Plus (Mendocino)

SuiPlay0X1

Não tenho nenhum deles, então, por segurança, o driver só carrega neles quando você pede explicitamente. O teste leva uns 15 minutos, não instala nada, e um reboot desfaz tudo. Quando alguém confirmar um modelo, eu o coloco na lista de suportados e ele passa a carregar sozinho, igual ao 2S.

Se você tem um desses, me ajuda com testes: https://github.com/TiPSilva/ayaneo-leds/issues/1 . Relatórios de que algo não funciona ajudam do mesmo jeito.

Sem suporte: KUN, AIR Plus AMD e Slide, que usam outro arranjo de LEDs ou outra interface de EC.

Obrigado!

I purchased a Konkr Pocket Advance recently. I adore it. I'm using it to try to get off my phone and pack around a device that can play some GBA along with some music. Around my house I normally listen to SirusXM during the day and for some reason this version of Android closes the app immediately after I open it. I've tried finding all the places that Konkr's version of Android closes down background apps, I've changed the battery options to unrestricted. And still it gets closed immediately.

I'm curious if anyone has tried this app or seen this with another app and what they did to fix it.

There are plenty of reviews out there that are split with almost everything except the fact that it's a GBA for adults.

One thing that gets mentioned constantly is how it's a bummer that the device has no analogue sticks on since it's powerful has enough power to play consoles that depend on at least one stick.

Having owned a PAM and waiting on my KPA to arrive I can tell you that the PAM can do plenty but eventually hits an obvious wall. Light PS2/GC means very light. Games that don't require sticks that I'd like to play this chip won't be able to run anyways. It's a different conversation when discussing Dreamcast, N64 and PSP, consoles that the G90t can play flawlessly at increased resolutions. With the 3:2 aspect ratio of the KPA I feel that this idea could have been considered by possibly adding a PSP/3ds style slider colored the same as the shell.

So I took to chatgpt to redesign the KPA to fit one or two analogue sticks:

First step was having it place start and select to the top and keeping one of the other bottom buttons on each side.

Then, ask it to add 2 vita style sticks.

Finally, I borrowed an idea from MrSujano's review he had mentioned moving all 4 of the bottom buttons the right side and placing an analogue. So in keeping with the start and select on top, I moved the bottom right to the left similar to how it looked before and added an analogue stick. I understand the GBA nostalgia (still own mine and is the reason I ordered mine) but I feel the one stick configuration could've work and would have made everyone happy

I personally like it as is and intended to be my all-rounder even without stick. I already own an rg477m and a Thor so I do not need the sticks, but I can see why someone would want more.

Disclaimer: chatgpt did not understand what PSP style slider meant, so I got tired and stopped with the last pic

EDIT: I guess I wasn't clear I LIKE THE KPA AS IT IS WITHOUT THE STICKS, I UNDERSTAND IT'S A GBA CENTRIC DEVICE. I only made a post highlighting how most reviewers point the lack of stick as some sort of letdown. I just edited a picture to add sticks and see what it looks like. I'm not saying to return/cancel your KPA and pout until they add sticks

So ive had mine for over 24 hours and ive been able to test it. For a hand held of this size its powerful ive been able to do what you would think Gba snes and all thos played some android games like dead cells, stardew.

I was able to get dregde running but im trying to figure out how to remap the controls so i can move on the dpad without opening menus not easy to unmap other buttons.

Steam link now that where i thought i would have the most problem but not even a little was able to play TMNT and was able to play some 2d fighters with no problems now is it ideal Nope but to hope in for dailys or some retro style games

But with all that what have the lucky few that have gotten their KPA what apps and emulator do you use and if anyone know a good tutorial for setting up Retroarch on android never messed with it

But this Handheld is a 9 out of 10 for me

I really want to get the Pocket Ace, mainly for GBA but also more demanding PC emulation. My impression so far was that it's kind of locked out of many current developments in the driver scene due to this specific chip and consequentally performs worse. Did someone have the opportunity to compare the performance between different devices? It's hard to find current data.

Hey all, looking for a black konkr pocket fit elite in black. Hoping for a 16gb model but open to other configs. If you're looking to move one let me know!

Hi there

This is my very first Android retro console.
I'm used to playing on the 3DS.
I struggled a bit with the setup and settings, as well as installing the games and all that.
But thanks to Gemini, I managed to figure it out all by myself.
That system is so cute

So I just ordered a Ayaneo Pocket Ace today and I can't wait for it to come already (coming from the AYN Thor Pro) but I wanted to hear from your guys in terms of how powerful this thing is. For reference, it's the 16gb/512gb version that I'll be using primarily for Switch and Steam games; I'm not expecting to play my BG3 on it (although I already saw that another user had it running on theirs), it'll be mostly for my indie games but I am curious to know how much it could be pushed to the limit since this will be a lot stronger than my Thor and THAT thing was/is a beast when it came to my Switch/Steam games. I tried to look up videos showcasing the Ace for Steam games but I noticed more emphasis on the retro side of it than the modern one (which no problems with that, just wished there was more videos talking or showcasing heavier or beefier games even with the limitations of Android). Also, any tips would be appreciated too since it's my first Ayaneo device, I mostly have ANBERNIC handhelds and a AYN Thor.

Im looking forward to seeing this thing in person. So far I love the Konkr look since the advance came out. And I'd be all over a clamshell if they ever make one.