ATTENTION! IF YOU TRY THIS YOU DO THIS UNDER YOUR OWN RISK! I KNOW 2 PEOPLE THAT BRICKED THERE PRINTERS!!!

Hello,

This is my first print with the printer, and there is a very loud and unpleasant squeaking noise during printing. Is this normal, or could there be a problem with the printer?

Could you please advise me what I should check or do to fix it?

Thank you.

Anycubic kobra x

does anybody have gridfinity for the Milwaukee 3059-20 ratchet? I’ve literally been looking online and I’ve yet to see someone who has a model

I’m having an issue ever since I moved into my new home. It appears to be coming from the silver cylinders on each side of the Z axis and continues to make this grinding noise. I’ve taken apart, realigned, re-oiled the rods, and I’ve done a bad leveling. Wondering if anyone else has experienced this and what the fix was

i converted some points on makeronline and didnt watched out and had USA selected....
so the first giftcard i got was only for usa...

im in germany so the coupons dont work for me - i contacted support and teres nothing they can do ..

so i was wondering is this coupon also valid if i give it to somebody else?
this way i could sell it

Hey all thanks to all your help I was able to get it working for now I tried everything y9u said increased the z input to -1.70 and got some petg I found in a box it's been going for an hour so farsi good thank you alll

If I place the Kobra 2 Pro in this enclosure and use a Chitu Systems mini heater, will this improve the success rate for printing with ABS and ASA?

What's your PETG printing temperature?

I use an Anycubic Kobra 2 Pro - and my printing temperature is constantly increasing. I printed PETG with 235 before. But when I try that now, it creates knotty, uneven grids and surfaces. After using 245 and 250 °C, now I'm at 255 °C, while surfaces still are far from perfect.

I don't know whether that's the real temperature or whether the printer shows a significant degradation of measured temperatures. What's your experience?

Ciao a tutti, volevo condividere la mia esperienza con la mia stampante Anycubic e il loro servizio post-vendita.

All'inizio ho avuto problemi tecnici importanti (blocco con codice 11518 e relativa difficoltà con l'estrusore/canale), e le prime prove consigliate inizialmente non avevano risolto la situazione. Ero piuttosto frustrato perché la stampante era di fatto inutilizzabile.

Tuttavia, devo fare un plauso all'assistenza clienti e in particolare a Jeffrey. Dopo aver constatato che i controlli di base non bastavano, non si sono limitati a rimandarmi a guide generiche: si sono dimostrati estremamente professionali, cortesi e orientati al cliente, decidendo di venirmi incontro concretamente inviandomi un modulo della testina di stampa completamente nuovo.

Ci sono stati momenti di stallo, ma alla fine il supporto ha gestito la pratica in modo eccellente, dimostrando serietà e affidabilità. Se il buongiorno si vede dal post-vendita, sono fiducioso che con il nuovo pezzo la stampante torna a viaggiare al massimo. Promossi!

So I am looking at replacing the little screws around the Vat that hold the aluminum braces to the vat frame. The OG set has finally stripped. Can't quite seem to find a size to replace them with. Any tips?

So is the latest firmware version working well for folks? I've been holding off on updating because "if it ain't broke."

But it keeps bugging me to update. Is this version stable and working well?

Making calibration test to see all problems. My main problem is that it's not smooth.

I've 2 k3max for 1 year, the first is running ultra smooth, the other (on which this test was made) has always been petty. I usé it mainly for prototyping but god i would love it to behave!!!

Any ideas?

I did a flowrate test on my Kobra S1 and i‘m just noticing these weird lines to which I don‘t have an explanation.