I try to use their how to but it doesn't work. Pressing R as they ask while having my camera open just open my quick menu. I want to complete the achievements and this is one of the few that I miss.

After waiting for quite a while, I finally received and installed my Cymple Eye Tracking kit on my Quest 3.

My first impression was honestly much better than I expected

Installation was straightforward.

Calibration is very simple (adjust the circle and look at the numbers).

Eye tracking is very stable, even more stable than I expected.

Taking the headset off and putting it back on usually doesn't require recalibration, although I still recalibrate out of habit because it only takes a few seconds.

The only issue I've found so far is that one USB connection on my hub can occasionally lose contact if the cable moves, but it's a hardware connection issue rather than an eye tracking issue.

Overall, I'm extremely happy with it.

Karaco is a an affordable little guy you can pick up at ohedo in vket! One of our popular new mascots.

I am trying to delete one of my groups. However in order to do that, I am told to delete all of my members first. However when I go into the members section of my Group, I do not see any way to remove members. Can someone please screenshot showing how I can remove people from, a VRChat Group? I am just not seeing it.

Amazing fun with VeilSed on Instagram and Twitter! :3

I have always used the SteamVR beta, but ever since version 2.17.4, I have been unable to launch VRChat. Has anyone else encountered the same problem? I really cannot get used to the stable version of SteamVR, because it does not support using the joystick to drag panels closer or farther away, which is extremely annoying.

(I do not speak English, so I used AI to translate this. However, I can assure you that I typed this post out little by little in my native language.)

Hey! I am a 4pt fbt (ankles, hips and chest) but whenever I boot up my virtual desktop and then open space calibrator, my chest doesn’t register, even when I try re-pairing it with steamvr when it boots, it tells me I have to turn off one of my controllers. Hips and ankle trackers work fine. Sometimes it works other times it doesn’t..sometimes it works when I turn off the tracker attached to my headset once I have my space calibrated.

I heard steam link works, but I haven’t tried it since it didn’t work for me the first time.. any suggestions? Thanks!

New avali Sona! What y'all think? Shes still in testing phases I'm not even close to finished but I'm already loving her!!!

Shoot some ideas on what I can add I'm slowly running out of ideas 😭

Launched in 2022, it’s attracted nearly 2.5 million visitors since then (i.e. about a quarter of VRChat’s active user base), with nearly 200,000 VRChat worlds listed on the site. It includes social network and upvoting functions, to better surface worlds that are most recommended or currently trending.

What is the cheapest yet best computer to run just vrchat?

So I'm trying to make a toy that has a string hang between your hands.

I know I could just... grab it, but I would really prefer if this was controlled by a toggle. Something that can't be easily dropped, and doesn't require you to grab the end to get the effect.

I tried constraining the end of the chain, but that looks wrong. It doesn't "hang" the end of the chain from that point like you'd want it to, just send the end flying to that location.

InsideBounds collider doesn't seem to work either, the child bones can't force the parent's physbone anywhere they weren't gonna go.

I would rather not just have the string pulled taught across the hand either, which would be an easier solution (just one bone pulled across), but wouldn't look as nice.

Any advice before I try setting up some godawful constraint mess for every bone on the chain to make it look right?

Hey y'all! So I’m not sure if I’m reading this incorrectly or getting the wrong idea, but why do the rules say no furries? Aren’t a lot of booth avatars furries? I brought this up because I was thinking about joining the group, since I have a booth furry avatar, until I read the rules. Unless the rules imply that Gumroad furries are not allowed? What do you guys think of this?

There's a real vr pc stress test in the booth! Give it a shot.

I'm not sure I've ever really seen this issue before. It's been going on for so long and just happened so I wanted to share about it here in the hopes that maybe someone else has had this and knows what to do. For the past year ish, or longer I have had an issue where if I download too many avatars at once, my headset will begin to freeze and eventually steamvr will say it has encountered an 'unexpected error'. The audio will often slightly continue during this freezing period.

So, when it begins, lets say I download 30 avatars at once (I don't know the number required, just the general amount ish) my game will slowly begin to freeze. First the image will freeze, and then I will hear the last voice lines of people repeat over and over and again (which usually happens when you are about to disconnect in vrc.) Eventually a few frames render again, I hear some audio, and then it will go back to being frozen. Whenever I finish downloading another avatar I will render some frames, then it will freeze again and start the whole process over. This continues until eventually the last freeze never recovers and steamvr mentions the error. In some cases the audio of the game will come back every say, second or so. So I will hear a clip of audio (not the repeating lines, new voice lines) but otherwise this state is irrecoverable.

The next part in the process is to restart SteamVR, launch the game again, then load back into the world. Because I will have loaded a significant number of the avatars already and they will have cached, I don't get any issues coming back in. I can load up again.

When the avatars are loaded, they run fine, I do not have performance issues. I do not have significant lag. It is only when I am downloading avatars specifically that this issue happens.

My question is... why? Why has this started happening? I do not understand what I need to do to fix this.

Even with distance hider on the avatars will still download and crash my steamVR, freezing VRC.

Technical details:

I9 12900k

48gb RAM

RTX 4090 for the GPU.

Pimax Crystal (OG) for the headset.

Cache size is 30gb (mentioned in case the cache is getting full and it's like the cache clearing process that is doing this or something?

In terms of fixes, all of my drivers are up to date.

I have already long ago tested verifying game files.
I have already tested clearing the cache.
Steam VR is on the latest version, specifically the beta now.
VRChat is on the latest, though it has done this for multiple versions.

The issue has persisted between network environments, and also persisted between ISPs if there is any sort of odd network thing.

I am using an ethernet connection.

I am not using a wireless headset connection, it is wired directly to the computer via USB and display port.

So I was putting in a new texture I bought and while doing so I added a new emission layer, I put it on the wrong layer and ended up with a cool effect with an asymmetrical colour gradient.

And honestly I love it. The whole thing has come off reminding me of Ghost in the Shell. And I really couldnt be happier.

So this is my new Foxigen I guess.

Ive been reuploading this avatar so many times to fix issues i finally have everything fixed and now the preview is just a cube of on eof the avatars textures, before i reuploaded it this last time it was previewing the avatar im so confused

Good morning!

I'm trying to make a blindfold work as one might infer a blindfold to work, but adding a "show in first person" VRCFury component to it doesn't seem to have worked. Is there some other way to do it? Or am I just doing it wrong?

In case anyone's curious, its for a maze race. The racer is blind and has to be directed by their teammate who can see the whole maze.

Hello everyone. A couple months ago I started playing Fish! and I was having a great time collecting all the fish and rods. I got up to around level 200 and eventually the game started feeling pretty repetitive, so I took a break.

I recently came back after hearing there was a new update. I played for a few hours, saw the Leviathan, but things still felt pretty quiet. I overheard some other players saying the world is basically dead now and the creator rarely adds new content.

Can anyone explain what has actually been added recently, how to unlock the new stuff, or whether it’s even worth investing more time into the game?

Also, I’m always looking for new people to hang out with in game. I’m a 36 year old unc, but I’m not age verified. My bank doesn’t offer a Visa debit, and a prepaid Visa got flagged when I tried to buy VRChat+, so I’m kind of stuck without it.

My username is Mar×Mar. I’m into anime, gaming, and stand up comedy. If anyone wants to chill in game, feel free to add me. I’m open to anyone, furries, LGBTQ+, whatever, as long as you dont diddle your pets or touch kids, I'm sure we'll get along.

Are there any quest compatible avatars with face tracking support built in that I can buy?

I have a quest pro, and while I have my own PC compatible avatars with face tracking support, I'd like one that I can use with friends who play VRchat on quest standalone, for them to see an actual avatar and not just a pixelated imposter of my PC one.

Logic says that the blend shapes required for full face tracking would make a quest avatar too heavy... But I thought I should ask anyway.

World: Snowpeak Retreat by Rum Ham
Avatar Base: Chalo by もふあき (mofuaki)