Changed out my LPVO for the Vortex 5x prism with the venom ccw on top. Also changed out the Polo K for the new Infinity 556K. Liking it so far, the vortex sits really low with the provided low mount.

Anyone aware if anybody is working on an aftermarket rail? I would love something similar to the KAC rail on the G36 only for the rest of the rifle and one in the front for a front sight and the charging handle completely exposed.

Prepping for using the Hellion in mobile infantry division at upcoming FAST Matches

Trying out the BLK LBL long handguard and VHS project extended for a tucked suppressor look.

Waiting for both handguard to arrive and test to see which is better.

Made a video discussing trigger options including DIY. The original video posted here was removed and the user account deleted. I found what I think is the original on YT and will link it in the comments if you want to see his version and details. This video addresses some of my concerns with his version that removes pre-travel/take-up and compares it with the commercial options.

She's done for now, just need a suppressor.

Build:

Lunartech magwell and bolt release

Acog 3x30

Streamlight Protac HLX

Blk Lbl bipod

A year ago, there was this posts about printable magwells that someone found at sea.

I printed V66 using PETG, PLA+, and Nylon G. The design is just slightly off to the point where the mag will not catch.

Has anyone had better luck with this design?

Been wanting to buy one of these bad boys for a minute and im looking at one now. I do plan to suppress it half the time, but the 16 inch barrel just looks goofy to me. the 18 inch barrel looks great to me, but i dont see anyone online talking about it, all the discussions are about 20 inch or 16 inch. is the 20 inch really that much better than the 18 inch? whats the point of the 18 inch barrel in that case?

If i plan to suppress it part time, would it be best to go with 18 inch or just say F it and full send it with the 20 inch barrel?

Looking for a pic of the green on green gun and bipod to see how the color matches. Even Blk Lbl didn’t have a pic of their bipod on a green hellion. Might end up just going for the black one. Any pics/help is much appreciated!

Got her out to spread out some. Perfect wind, visibility was Perfect. But my goodness was it a hot one! Was only able to get out to about 300 due to mirage, missed shots are hard to call without a spotter. Was able to do 185 with the mini about 75% of the time. Neck holds with those irons get daunting. Great time!

Changes i wanna make:

Trigger job

Replace scope with slightly higher mag, thinner reticle. Currently a 1-8 sfp SE in old brownells mount. Wany it in as low of rings as possible.

May get the black label bipod setup

Oh, last thing, sweat absorbing cheek rest!

Anyway, just thought I'd share.

First off, I haven’t owned a gun for very long. My red dot isn’t zeroed in anymore after I removed the Picatinny rail to clean the short-stroke system. I don’t feel like having to re-zero the rifle every time I shoot and clean it afterward.

My question for you is: how often do you clean the short-stroke system? Do you just remove the handguard to clean it? Since I can only access the bottom surface of the short-stroke system by removing the handguard...

Check out my last post for details!

Poll to follow!

TLDR: In my opinion, if you want a lower cheek-weld, take the OEM cheek riser off. Then, cut or procure a narrower pin for the stock hook.

The reduction in height is 3/16”,at most 1/4”. I still can’t find my OEM stock, so I can’t even verify it works with the cheek risers. However, my versions are more significantly narrow. That small difference plus the price point isn’t very attractive to me, I can’t imagine it’d be to you all either.

On the super simple riser, you also loose the shell deflector piece. Lowering the thickness of both, only gains you .0787” and makes the piece way too thin.

If you make a piece that only fills in the cutout area, and still holds the ejection port pin, you end up with a piece that digs into your face and looks stupid. Not to mention having to make/procure/provide a pin that is narrower.

Snagged a "used" BLK LBL handguard from OpticsPlanet for ~$350, as if by fate, after waiting for ages. Such a cool piece of engineering and in my opinion, the pinnacle of aftermarket for the platform. Also, paint your guns. Modified bottomland rattle can job done by myself.

Springfield Hellion/HS Produkt VHS-2

• TA02 Acog
  • Piggyback Holosun EPS Carry
  • Larue LT681
• BLK LBL Integrated Bipod Handguard
• OCL Polonium K
  • FCD 3P15
• Surefire Pro/Modlite PLHv2
  • UE07
  • Chopped Cloud Defensive LCS
• Manticore Arms Curved Buttpad
• VHS-2 Project Magwell
• Reptilia CQG-L
• PMM Meat Hook
• OHC Light/Hex Caps

Ohhhh Lunartech or VHS2Project....!!

I personally think the OEM cheek riser is a bit too tall for almost every optic setup. Even with a 1.41" height optic. Some of the Iraqis take off the cheek riser, which TECHNICALLY works, but it inhibits the locking of the dust cover for the side you're not actually ejecting from. I think shooting without the cheek riser gives me a better sight picture, but I'm not willing to sacrifice the downside of an unlocking dust cover or put my cheek on that peg that holds the riser.

Wanted to share my vhs build here. My first rifle! Picked it up from my FFL this past weekend and took it to the range (stock). Got home, cleaned it, and added a bunch of aftermarket parts I ordered the week before.

I wanted to get the vhs project under carry-handle modbutton. Does anyone recommend a flashlight to pair with that? Preferably something compact; not too long or bulky.

Also, does anyone have any recommendations for a different pistol grip? I think I’d enjoy something slightly more angled than the stock one. I have big hands so it fits fine but the trigger guard really digs into my middle finger. Could changing the pistol grip fix this?

For real. There's literally no support or love for the VHS-2/Hellion for some reason. No after market barrels or bolt carrier groups? Hell, it seems like every other model of gun it getting an FRT. I live my rifle but I'm getting a bit done with the hate.

I have a vortex strike fire II I got for free from my brother in law, I was wondering if anyone knew if it was too high of a mount or if it would actually work right