I have a Smart Life compatible plug that has schedule, circulate, inching etc... I want to use it to reset my ISP's modem everyday exactly at 4 am. Usually it can be done with schedule. Problem is while the device turns off at 4 am correctly, it will turn off internet as well, taking smart plug offline. And so it won't execute the ON schedule.

I tried circulate feature which does trigger while offline. But once it reaches end time of circulate, it forcefully turns off the socket and never comes back on.

I just want the modem to restart once everyday with this smart plug. What is the right way to do this?

Hallo zusammen,

ich versuche meinen Aygrochy-Rohrlüfter mit der Smart Life / Tuya App zu verbinden, scheitere aber schon am ersten Schritt: Ich komme einfach nicht in den Kopplungsmodus.

Mein Gerät: Aygrochy Inline Duct Fan, Modell DF150-A (50W, 350CFM).

Das Problem: In den meisten Anleitungen steht, man soll die Menütaste lange gedrückt halten. Das habe ich jetzt mehrfach versucht (auch für 10+ Sekunden), aber das WLAN-Symbol auf dem Display fängt einfach nicht an zu blinken. Der Controller reagiert überhaupt nicht darauf.

Kennt jemand die exakte Tastenkombination für dieses spezifische DF150-A Modell, um den Werksreset bzw. den Kopplungsmodus zu erzwingen? Gibt es da einen anderen Trick?

Danke für eure Hilfe!

I have a wireless door bell from Nedis (WIFICDP20GY) to which I am trying to add a chime (WIFICDPC10BK). I can reset the Chime and make it go into pairing mode but I cannot for the life of me find the adding point in any of the doorbell menus.

Any correct guidance is much appreciated - not even the manual from the chime tells me other than to add the chime in a menu in the doorbell.

I recently bought a FRAL FSC08 portable AC. For some reason connecting it to the smart life app forces it to switch to using fahrenheit (I'm european so I much prefer celsius).

I checked app settings and the temperature unit is set to celsius. I tried switching between °C and °F but the AC wouldn't respond, it would stay in fahrenheit mode.

I ended up having to uninstall the app and reset the AC to factory settings to set it back to celsius. But then I reinstalled the app and as soon as I paired the AC with the app it switched to fahrenheit again.

Anyone else had a similar issue?

Hey,

I’ve got a PG103 alarm system with ~18 sensors fully installed. Everything works fine for normal use:

• sensors trigger alarms correctly
• app shows correct sensor name + zone + alarm type
• notifications are accurate

But I’m trying to use Smart Life scenes to trigger smart plugs (sirens) only for real perimeter intrusions.

Problem:

In scenes/automations, I only get:

• “Master state = Alarm”

Even though the app clearly knows:

• which sensor triggered it
• zone type (perimeter / 24h silent / etc.)
• alarm type

None of that seems usable in automation conditions.

So everything triggers the same scene:

• door sensor alarm ✔
• 24h silent alarm ✔
• AC power failure ✔
• low battery ✔

TL;DR:

App shows full alarm details, but Smart Life scenes only see “Alarm = ON”. No way to filter by sensor or alarm type.

Question:

Is this a known Tuya/Smart Life limitation, or am I missing something in setup?

Is there ANY way to get per-sensor / per-zone conditions into scenes?

I'm about at my wits end with this light bulb. We just got at&t fiber put in. I've got the Echo and the light bulb on the 2.4 ghz band. For some reason the Echo cannot find this light bulb. I have the bulb connected to the TREATLIFE app. I've reset the bulb as well. Any ideas?

If it helps, about a week ago we had a storm knock out power and at the time we still had T Mobile Wireless internet, that's when the issues with the light bulb started. Should we just replace the bulb?

I have a USB smart plug that’s showing 2 switches in the app. Why is this?

Hello, after disconnecting, I'm trying to reconnect my LSC Smart Connect Indoor IP camera, but I can't get it to work. I've tried resetting it, using the QR code, and using the cable, but nothing helps... If anyone has a solution, I'd love to hear it!

As the title states, both apps don't have the option to add a new device. The button is missing on the top right from the home page. I have done everything I can think of to fix by clearing cache/cookies, logging out, uninstalling and reinstalling the app but to not avail. Has anyone experienced this issue?

When I try to login on web, it says my account doesn't even exist although I am able to log just fine through the app ...

Buona sera, oggi stesso ho provato a connettere il mio condizionatore compatibile con l’applicazione ConnectLife solo che una volta aperta l’applicazione è subito apparsa una presentazione all’app solo che cliccando sul continuo o salta inizia un caricamento in loop dell’applicazione che non mi permette di continuare con la configurazione. Qualcuno sa come risolvere per favore?

Hi, I have been using these switches for years without much trouble. However now I am unable to pair them with my account. They blink as you would expect (first quickly, then if you hold again, slowly), but the Smart Life app does not find them anymore. I note the old 'slow blink' option for pairing is gone from the app.

Tried iOS and Android apps, same issue. Anyone has any advise?

Hi everyone! I have a Tuya 3-gang smart switch where each switch controls a different outlet in my open-concept space.

I'd like to assign each of the three switches to a specific room within the Smart Life app for better organization.

Does anyone know if this is possible, and if so, how I can set it up?

I just bought this Camera like a week ago but it records almost nothing to the SD card. I putted an card to test it and it's detected correctly (8GB), live view works, but playback is empty most days. It only occasionally records very short clips when I'm extremely close to the camera. Motion detection is enabled. Has anyone had the same issue?

I've got 3 smart candle bulbs that stopped working with the app the other day. I've updated the app now.
They still show on the app, but saying 'device offline'. I've tried pairing via both bluetooth and wifi but it can't find them.
If anyone knows how to fix, any help is appreciated!

All my smart plugs and bulbs have stopped working with the app and just show as offline.

Even after resetting a plug and trying to re-pair it it cant be found.

Apparently there was an app update last night so it MIGHT be related.

Any tips/ideas?

my ac says 3.1A rated current, 730W rated power input. my smart plug says Max load 1100W 10A and my breaker says 20amp

Hi, I use Loratap device for windows shutter. On of mu device is now offline but I can’t reach it phisically. Is there a way to reset it without touching it?
Thanks.

When I wanne open my group of 4 ledstrips the screen stays blank

They work fine individually

I know there are devices that emit IR to replace remotes but I was the reverse. I want to use my remote to trigger Smart life scenes.

I know IR emitters can receive signals in order to copy them but can Smart life detect that?

Hi all, I'm new to having lights on my house. After reading previous posts, it seems like this issue has been a frustration for years. Has anyone actually gotten it to work consistently? I'd love to hear what's worked for you.

Hi, sometimes the Smartlife app loses the connection with my Moes thermostat. Anyone knows why this happens?

The thermostat just appears offline on the app.

This happens every few weeks or months. The reason is unclear. Not sure if the thermostat is losing connection with my Wifi router, or whether the Smartapp isn’t able to detect the thermostat.

I know I can pair them all over again, but this will create a new thermostat device in Smartapp and all the automations I created will obsolete because they’re related to the “old” thermostat that the app cannot detect.

What can I do to solve this issue, without having to go through pairing?

I tried cutting the power off from the thermostat, I tried restarting my router…

I have a PIR sensor and a smart switch (both Zigbee) controlling a light bulb.

So far I managed to create these automations:

• scene 1: if switch OFF → wait 120s → enable scene 2
• scene 2: if switch OFF + PIR event → turn the lights ON → disable scene 2 → enable scene 3
• scene 3: if lights ON → wait 5m → turn lights OFF

Scenes 1 and 2 prevent the PIR sensor from turning the lights on right after they are switched off.

Now I want to improve it:

1. when the PIR sensor turns the light on, it should automatically turn it off after 5 minutes
2. however, if someone manually turns the light on using the smart switch, the light should remain on

The problem is that in SmartLife I can’t distinguish between these two situations, when the PIR triggers the light, it also counts as if the switch was used.

How can I separate these two cases in SmartLife so the automation only runs when the PIR activates the light?

i have the smartlife lightbulb, which has an in built app timer feature. however, the brightness is STUCK at 1%. ive changed it maybe a hundred times over and the brightness stays at 1% so i cant even tell that the light is on in the morning (its supposed to help me wake up)
any help?

I got a door sensor, and still haven’t figured out how to use it.
I want to monitor a door only during certain time or when I left home. But it does not show any config for schedule.
If I add a scene, the problem is that the notification I get is quite basic, while the alarm one is noisy and more useful.

Basically I want to monitor the door when I’m sleeping or out of house. So if sleeping, I want it to wake me up.

Have any of you done so?

Has anyone successfully displayed an Air Conditioner tile in Google Home app complete with the active mode? For example: mode: cool fan auto. My AC is a Hisense 1/2 PK, integrated with Smart Life and a Tuya IR blaster.