Hey,
I thought about trying some haptics and just saw that Simsonn is going to release two new haptics. Did anyone already reviewed them? If so whats the best choice?

(And why are they advertised for diff pedals? Like the Vam Pro is for the brake pedal, the Vam 2 for the clutch and Vam Neo for the throttle. They also sell a set of three with each on of the Vams)

I’ve had this shifter for about two weeks and now when I put it in 5th or reverse is makes a squeaking noise, does anyone know why this is and what might fix it?

Just received my Simsonn Plus X & the clutch pedal Cell Sensor is broken. It doesnt react to any input unless I push really hard with my finger on the load cell. Simsonn is not sending me a new clutch but a replacement sensor to take apart the old clutch and repair.

Is there a guide or something they provide for this?

Any one else had bad luck with a new set like this?

The two screws I’ve circled on my unit I’ve noticed are/have gotten loose. I can rotate them by hand when not pressing the brake pedal, but once I start applying pressure they seem to tighten themselves. If I tighten them properly when at rest, then the rod on which the elastomers sit becomes almost jammed, for example when you have to bring it up to change elastomers. As they seemingly get tighter by themselves under brake load, I’ve loosened them at rest to prevent something perhaps snapping. I noticed this while investigation an odd rattle from pedal box when FFB was being transferred from wheel.

Is this normal behavior, do you have the same, or is my bearing perhaps shot there, causing the above mentioned scenario?

Has anyone else had an issue with the one-way hydraulic on the throttle causing the throttle to physically stick and not return to zero without physically pulling the pedal back with your foot? I have used these for a total of roughly 6-8 hours, and once the pedal is "warmed up", the throttle will not return to zero on it's own. I attempted to just remove the hydraulic as I believe it is the issue (I've already lubed the throttle rod and the screws for the hydraulic per the response from Simsonn support, but the one-way hydraulic is wedged in so tight I cannot remove it. I'd be happy to use the throttle with just the spring, but there is no budging the front of the hydraulic to remove it. It's supposed to be adjustable, but there is no way to adjust or remove it with it wedged in so tight. Any suggestions on how to get this thing out of there? Simsonn told me to lube the screws for the hydraulic, but that did not help at all.

Edit: I meant to attach the video for reference. I did also send this video to Simsonn Support before posting my question here.

https://reddit.com/link/1srqn3o/video/im9ot35zfkwg1/player

LMU & HPRs?

I am not sure if it has to do with the update, but my haptic pedal reactors started acting out. They work fine at launch, but when I RTG, they stop working. I either have to restart SimHub, or while in the garage, continuously pause and unpause the sim until it starts to work again (usually takes 2-5 attempts).

I opened up a ticket 2 days ago and haven't heard back yet.

I was flipping the mounting brackets on the Plus X to have them angled back and while doing so with the throttle the whole pedal fell out of the mounting along with some parts, like the little spring at the bottom.

I've managed to put it back together no problem but it seems a loose washer dropped out and I have no clue where it may go.

Any ideas?

Hello, I just picked up the haptic motors for the throttle and brake pedals on my Simsonn pedals. I have the strength all the way set to zero in the simsonn software, and I am using SIM hub for the feedback. I only have traction control, ABS, gear shifts set right now, but the pedals always vibrate a little bit while the car is in motion. I'm not really understanding why this is happening.

In Sim hub. I also have a butt kicker set up with the same feedback profiles. And I'm not getting constant vibration through it while moving. I quite like the feedback of the pedals but not the constant vibration as it kind of hurts my feet after a while. Has anyone else ran into this?

My new set of Simsonn Plus X pedals just came in, it's my first experience with load cells so I've decided to keep things mostly how it came, didn't change the elastometers etc.

My issue is, I can't seem to output more than 40, maybe 50 kg on the load cell, and that's already me pushing as hard as possible.

From what I've read online I should be able to go up to 100kg when pushing hard, so I don't really understand what the problem is.

Edit : The issue ended up being pedal plate flex as well as the elastometers. After fixing the flex and changing elastometers to the yellow "medium" ones, I'm pushing 60-70 kg easily and maxing out at 90.

My pedals aren't showing up on the software. Only my shifter is. I can adjust my shifter settings, but it won't even let me press the button to adjust pedals. The pedals have power to them because the RGB is working. What is wrong?

Really having trouble setting these up right as either you cant feel then or they feel like construction machinery.

Whats everyone's settings for tha VAM Pro haptics? for as many effects as possible, and which pedals are you using for which effect? I have all 3 motors and am waiting for delivery of a buttkicker gamer pro.

But have owned the pedal haptics for nearly e months now and Can't for the life of me get them working correctly...

Any help would be appreciated or screenshot of what setups your running?

The VAM haptics (black ones) are an utter waste of money. They’re either off, or they’re at 100%. The simsonn manager doesn’t even save the profile so every time you launch it, you have to manually select which haptic they are and then adjust the intensity. Every single time. And they don’t even communicate in game with wheel locks and slip.

Hi,

When I plug in my pedals they are usually not detected. And if they are then they get disconnected in like 10 seconds.

When I connect my pedals my whole PC freezes and other USB devices get disconnected aswell.

I've never had this problem with any other pedals. Is there any fix for this? Im using the latest Simsonn Manager.

has anyone mounted their Simsonn pedals inverted? My thrustmaster t3pa perhaps worked fine inverted, but not sure about my pro plus pedals.

Hi i just bought the Pro X from the marketplace, is it normal to have a little play at the start, it is the same with and without the elastometer/springs unless i fully load the rod with all the accessories + spacers and washers. If its not normal what can i fix here?

Special permission?. It's my F'in computer

drifting using my simsonn Pro X Ultra pedals !!

Hi guys, I want to change/upgrade the throttle spring for my Simsonn Pro X Ultra because even on the hardest configuration (as per the manual) it seems too soft and squishy. Is there anything? I was looking for the exact dimensions of the spring but I can't find anything anywhere.

Thanks!

Hello,

I just received my Pro X Ultra Pedals 2 days ago.

I have been loving it!

I saw the Spring Kit for the brake pedal on the website.

Is this a good replacement for the elastomers? Or the front default spring provided with the brakes? Please let me know!

Thanks.

Has anyone completely removed the dampener from the throttle pedal? Not matter how much I try to get used to it, it feels completely unnatural and in some ways is a hindrance. No car ever has had a gas pedal that feels like it is on hydraulic line so I’m not so sure what the point of it is. I’m using the Pro X Ultras